LED control on pink pogoplug?

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

LED control on pink pogoplug?

Postby mycorunner » Tue Dec 13, 2011 11:41 pm

There seems to be more information on the LED on the dockstar, but is there a way to control the LED on the pink pogoplug?

I'd like it to turn green when fully booted, right now it is only orange.
mycorunner
 
Posts: 5
Joined: Tue Dec 13, 2011 11:38 pm

Re: LED control on pink pogoplug?

Postby mycorunner » Wed Dec 14, 2011 12:47 am

EDIT:

I was able to turn the green led on by using the commands:

Code: Select all
echo none > /sys/class/leds/status\:blue\:health/trigger
echo default-on > /sys/class/leds/status\:green\:health/trigger


Unfortunately that doesn't keep the green LED on after a reboot. What would be the correct way of setting it up so that it turns green when the system is up?
mycorunner
 
Posts: 5
Joined: Tue Dec 13, 2011 11:38 pm

Re: LED control on pink pogoplug?

Postby WarheadsSE » Wed Dec 14, 2011 1:25 am

Add those lines to /etc/rc.local :)
Core Developer
Remember: Arch Linux ARM is entirely community donation supported!
WarheadsSE
Developer
 
Posts: 5135
Joined: Mon Oct 18, 2010 2:12 pm

Re: LED control on pink pogoplug?

Postby mycorunner » Wed Dec 14, 2011 1:36 am

That did the trick, thanks!!!

On a side note, does anyone know what the other LED (plug:red:misc) does on the pogoplug? Maybe there's an LED on the board or something that you can't see?
mycorunner
 
Posts: 5
Joined: Tue Dec 13, 2011 11:38 pm

Re: LED control on pink pogoplug?

Postby haiku » Sun Jan 29, 2012 10:19 am

Neat. Do you know how turn it back to orange ?
haiku
 
Posts: 74
Joined: Tue May 31, 2011 6:34 am

Re: LED control on pink pogoplug?

Postby kmihelich » Mon Jan 30, 2012 1:18 am

Using arcNumber 3542 with the latest kernel (3.1.10) gives correct LED control on v2.
Arch Linux ARM exists and continues to grow through community support, please donate today!
kmihelich
Developer
 
Posts: 1094
Joined: Tue Jul 20, 2010 6:55 am
Location: aka leming #archlinux-arm

Re: LED control on pink pogoplug?

Postby minimal » Mon Jan 30, 2012 9:15 pm

If I change my arcNumber away from 2998 then my Pogo won't boot. Is there anything else I need to do to boot with the different arcNumber ? I miss my LEDs...
minimal
 
Posts: 7
Joined: Fri Jan 13, 2012 3:58 pm

Re: LED control on pink pogoplug?

Postby WarheadsSE » Mon Jan 30, 2012 9:49 pm

Are you running kernel 3.1.10 ?
Core Developer
Remember: Arch Linux ARM is entirely community donation supported!
WarheadsSE
Developer
 
Posts: 5135
Joined: Mon Oct 18, 2010 2:12 pm

Re: LED control on pink pogoplug?

Postby minimal » Tue Jan 31, 2012 9:45 am

Yup: 3.1.10-1-ARCH from uname -a

it's also a 'fresh' install form the 14th of Jan tarball and then paman -Syu as things got hosed with the recent broken kernel update.

I haven't upgraded to kmod yet: still seeing people reporting 'the kmod problem' but I don't understand if it matters when I've not got any extra modules built or peripheral plugged in, so after being burnt once my poor v5 testing I'm not going to dive in again immediately...
minimal
 
Posts: 7
Joined: Fri Jan 13, 2012 3:58 pm

Re: LED control on pink pogoplug?

Postby Socaltom » Tue Jan 31, 2012 9:39 pm

Looked up arcnumber in the wiki, but how do I change it?
Thanks
Tom
Owned by me
Pink Pogo V2, Black Pogo V3, Zyxel NAS 325 v1,
Adminstrator for
Goflex net, Black V3, Black V2
Socaltom
 
Posts: 420
Joined: Thu Apr 07, 2011 2:21 pm
Location: The left side

Next

Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 2 guests