[Goflex Home 3TB] Newbie help

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

Re: [Goflex Home 3TB] Newbie help

Postby moonman » Fri Mar 16, 2012 8:50 am

That is why WarheadsSE suggested to spawn all netcats (nc) before you turn goflex on. Drive needs to be in the cradle to see why it doesn't boot from it. By logs we mean whatever comes up in the terminal window(s).
PogoPlug v2 Pink | Seagate GoFlex Home | Raspberry Pi B 512
----------------------------------------------------------------------------------------------------------------------
[armv5] How to update U-Boot for kernel v3.2 and newer | [armv5] How to reinstall ALARM from scratch | [armv5] How to install my.pogoplug.com service
moonman
Developer
 
Posts: 2022
Joined: Sat Jan 15, 2011 3:36 am
Location: Calgary, Canada

Re: [Goflex Home 3TB] Newbie help

Postby dannyp » Fri Mar 16, 2012 12:44 pm

Thanks for that. I understand. I will connect the drive and post the output.
Goflex Home 3TB Alarm
- SAMBA, MYSQL, SICKBEARD, COUCHPOTATO, HEADPHONES, WEBMIN, SABNZBD.

Goflex Home 2TB Alarm
- SAMBA, SUBSONIC, WEBMIN.

Raspberry PI Model B 512K
- RASPBMC
dannyp
 
Posts: 36
Joined: Wed Mar 14, 2012 8:45 am
Location: UK

Re: [Goflex Home 3TB] Newbie help

Postby dannyp » Fri Mar 16, 2012 1:29 pm

I have just tried again using the same method as before and this time nothing.

I did notice however that my lan kept connecting and disconnecting, think I may have a broken wire in my crossover cable.

I will get a new on then try again, will piston results once I have the new cable.
Goflex Home 3TB Alarm
- SAMBA, MYSQL, SICKBEARD, COUCHPOTATO, HEADPHONES, WEBMIN, SABNZBD.

Goflex Home 2TB Alarm
- SAMBA, SUBSONIC, WEBMIN.

Raspberry PI Model B 512K
- RASPBMC
dannyp
 
Posts: 36
Joined: Wed Mar 14, 2012 8:45 am
Location: UK

Re: [Goflex Home 3TB] Newbie help

Postby dannyp » Fri Mar 16, 2012 6:25 pm

here is the output with the drive in the cradle.

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
Code: Select all
ubuntu@ubuntu:~$ sudo ifconfig eth0:0 10.10.10.5
ubuntu@ubuntu:~$ sudo ifconfig eth0:1 10.10.10.4
ubuntu@ubuntu:~$ sudo ifconfig eth0:2 10.10.10.2
ubuntu@ubuntu:~$ nc -lu 10.10.10.5 6666

U-Boot 2010.09 (Feb 16 2011 - 18:44:23)
UBIT v0.6 by Jeff Doozan and Peter Carmichael
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:fast", error -19
Error reading superblock on volume 'ubi:fast'!
UBIFS not mounted, use ubifs mount to mount volume first!
** Block device usb 0 not supported
** Block device usb 0 not supported

** Invalid boot device **

** Invalid boot device **
** Block device usb 1 not supported
** Block device usb 1 not supported

** Invalid boot device **

** Invalid boot device **
** Block device usb 2 not supported
** Block device usb 2 not supported

** Invalid boot device **

** Invalid boot device **
** Block device usb 3 not supported
** Block device usb 3 not supported

** Invalid boot device **

** Invalid boot device **

Reset IDE: Bus 0: ...OK Bus 1: not available 
  Device 0: Model: ST33000651AS Firm: CC43 Ser#: 9XK09DJA
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 764436.4 MB = 746.5 GB (1565565872 x 512)
Loading file "/boot/uImage" from ide device 0:1 (hda1)
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - ide 0:1 **
Loading file "/uInitrd" from ide device 0:1 (hda1)
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - ide 0:1 **
reading /boot/uImage

** Unable to read "/boot/uImage" from ide 0:1 **
reading /uInitrd

** Unable to read "/uInitrd" from ide 0:1 **
** Bad partition 1 **
** Bad partition 1 **
No Powersaving mode 7F
Error (no IRQ) dev 1 blk 0: status 0x7f
** Can't read from device 1 **

** Unable to use ide 1:1 for fatload **
No Powersaving mode 7F
Error (no IRQ) dev 1 blk 0: status 0x7f
** Can't read from device 1 **

** Unable to use ide 1:1 for fatload **
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:ramdisk", error -19
Error reading superblock on volume 'ubi:ramdisk'!
UBIFS not mounted, use ubifs mount to mount volume first!
Marvell>>
Last edited by WarheadsSE on Fri Mar 16, 2012 8:36 pm, edited 1 time in total.
Reason: CODE TAGS
Goflex Home 3TB Alarm
- SAMBA, MYSQL, SICKBEARD, COUCHPOTATO, HEADPHONES, WEBMIN, SABNZBD.

Goflex Home 2TB Alarm
- SAMBA, SUBSONIC, WEBMIN.

Raspberry PI Model B 512K
- RASPBMC
dannyp
 
Posts: 36
Joined: Wed Mar 14, 2012 8:45 am
Location: UK

Re: [Goflex Home 3TB] Newbie help

Postby moonman » Fri Mar 16, 2012 8:18 pm

Did you label the first partition "rootfs" ?
PogoPlug v2 Pink | Seagate GoFlex Home | Raspberry Pi B 512
----------------------------------------------------------------------------------------------------------------------
[armv5] How to update U-Boot for kernel v3.2 and newer | [armv5] How to reinstall ALARM from scratch | [armv5] How to install my.pogoplug.com service
moonman
Developer
 
Posts: 2022
Joined: Sat Jan 15, 2011 3:36 am
Location: Calgary, Canada

Re: [Goflex Home 3TB] Newbie help

Postby dannyp » Fri Mar 16, 2012 9:01 pm

Like I said initially, I followed the steps in the install so if its in there then I can only hope I did and didn't miss a step but as it isn't working we art rule anything out at this stage.

Is there a way to check, and if I haven't, a way to fix it??
Goflex Home 3TB Alarm
- SAMBA, MYSQL, SICKBEARD, COUCHPOTATO, HEADPHONES, WEBMIN, SABNZBD.

Goflex Home 2TB Alarm
- SAMBA, SUBSONIC, WEBMIN.

Raspberry PI Model B 512K
- RASPBMC
dannyp
 
Posts: 36
Joined: Wed Mar 14, 2012 8:45 am
Location: UK

Re: [Goflex Home 3TB] Newbie help

Postby WarheadsSE » Fri Mar 16, 2012 9:25 pm

if you haven't, it's a simple tune2fs command. `tune2fs -L "rootfs" /dev/blargs
OXNAS pwner

Remember: Arch Linux ARM is entirely community donation supported!
WarheadsSE
Developer
 
Posts: 4498
Joined: Mon Oct 18, 2010 2:12 pm

Re: [Goflex Home 3TB] Newbie help

Postby dannyp » Fri Mar 16, 2012 9:47 pm

So I just do that at the marvell command prompt?

tune2fs -L "rootfs" /dev/blarg

and that's it?

I did notice on the output log it put the drive at 700 or so gig and not the 3tb is that something I should worry about?
Goflex Home 3TB Alarm
- SAMBA, MYSQL, SICKBEARD, COUCHPOTATO, HEADPHONES, WEBMIN, SABNZBD.

Goflex Home 2TB Alarm
- SAMBA, SUBSONIC, WEBMIN.

Raspberry PI Model B 512K
- RASPBMC
dannyp
 
Posts: 36
Joined: Wed Mar 14, 2012 8:45 am
Location: UK

Re: [Goflex Home 3TB] Newbie help

Postby moonman » Fri Mar 16, 2012 10:32 pm

I thought we already figured it out. You need hybridmbr for 3TB disks. Read the thread here: viewtopic.php?f=18&t=1953#p13713

This makes it a bit more difficult as since you haven't created the HMBR prior to installation, you will have to use your computer to partition and format the drive, and then extract the alarm tarball (found here: http://archlinuxarm.org/os/ArchLinuxARM ... est.tar.gz) to the first partition. I will need to use ubuntu live cd for all that. There's gdisk for windows http://sourceforge.net/projects/gptfdis ... -binaries/ , so you can partition the drive in windows with hmbr (I am not sure if ubuntu livecd comes with gdisk, also I am not sure if you will be able to temporarily install it with livecd so I am giving you the windows version). After partitioning you for sure need to format and extract in ubuntu live cd.

Code: Select all
cd /media/rootfs
wget http://archlinuxarm.org/os/ArchLinuxARM-armv5te-latest.tar.gz
sudo tar xvzf ArchLinuxARM-armv5te-latest.tar.gz
sudo umount /media/rootfs
PogoPlug v2 Pink | Seagate GoFlex Home | Raspberry Pi B 512
----------------------------------------------------------------------------------------------------------------------
[armv5] How to update U-Boot for kernel v3.2 and newer | [armv5] How to reinstall ALARM from scratch | [armv5] How to install my.pogoplug.com service
moonman
Developer
 
Posts: 2022
Joined: Sat Jan 15, 2011 3:36 am
Location: Calgary, Canada

Re: [Goflex Home 3TB] Newbie help

Postby moonman » Fri Mar 16, 2012 11:06 pm

to use gdisk in ubuntu you should be able to
Code: Select all
sudo apt-get update
sudo apt-get install gdisk
sudo gdisk /dev/sd[x]

where [x]=your drive i.e. /dev/sda
PogoPlug v2 Pink | Seagate GoFlex Home | Raspberry Pi B 512
----------------------------------------------------------------------------------------------------------------------
[armv5] How to update U-Boot for kernel v3.2 and newer | [armv5] How to reinstall ALARM from scratch | [armv5] How to install my.pogoplug.com service
moonman
Developer
 
Posts: 2022
Joined: Sat Jan 15, 2011 3:36 am
Location: Calgary, Canada

PreviousNext

Return to Marvell Kirkwood

Who is online

Users browsing this forum: Google [Bot] and 2 guests