A couple of questions:
I had the Boot Drive plugged in the USB port in the front of the Pogoplug, plugged the other 2 drives in the back and it didn't boot.. Do I use the rear top USB port for the boot drive?
I plugged in just the boot drive in the top rear USB port by itself and then plugged in the other 2 drives after it booted from the drive (same scenario as I was having before converting it to ext3) but the 2 drives did not auto-mount.. In Webmin, I mounted them and set them to mount at boot and saved.. Is there anything funny you can see with the settings below:
Here is my fstab configuration:
$this->bbcode_second_pass_code('', '#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
/dev/sdb1 /media/Elements ext3 user 0 0
/dev/sdc1 /media/Maxtor ext3 user 0 0
')
Should I add "auto" or "default" for the options of those drives?