Pogoplug Pro: unable to probe gspca webcams

[fovea1959]

(cross posted from the Pogoplug PRO forum)

Relatively fresh boot disk:

Code: Select all

[root@pogo 2.6.31.6_SMP_820]# uname -a
Linux pogo 2.6.31.6_SMP_820 #6 SMP Thu Jun 14 19:49:57 CDT 2012 armv6l GNU/Linux


I hand built the missing modules.builtin:

Code: Select all

find . | grep ko | cut -f 2,3 -d \. | cut -f 2- -d \/ > modules.builtin


I can now load the gspca_main module:

Code: Select all

[root@pogo 2.6.31.6_SMP_820]# modprobe gspca_main
[root@pogo 2.6.31.6_SMP_820]# lsmod
Module                  Size  Used by
gspca_main             23232  0
videodev               35712  1 gspca_main
i2c_core               22580  1 videodev
v4l1_compat            15172  1 videodev
bootled_module          1472  0
gmac                   40012  0
mii                     6200  1 gmac


I have 3 gspca supported webcams:

Code: Select all

[root@pogo 2.6.31.6_SMP_820]# lsusb
...
Bus 001 Device 010: ID 046d:0840 Logitech, Inc. QuickCam Express
Bus 001 Device 009: ID 0733:0401 ViewQuest Technologies, Inc. CS330 Webcam
Bus 001 Device 008: ID 041e:401c Creative Technology, Ltd Webcam NX [PD1110]


If all is working, shouldn't I be seeing message like this when I plug in a webcam?

Code: Select all

[  868.220522] gspca: main v2.6.0 registered
[  868.231488] gspca: probing 046d:08da


I'm seeing "registered", but not the "probing"... Am I doing something wrong?