Can't connect to GoFlex Net after install via SSH

[bigdooley]

Hi all, I've searched and searched and can't find an answer to my particular problem:

I installed ArchLinux on a 4Gb thumb drive plugged into the single usb port exactly as per the instructions and did the first reboot. The light on the front goes green, I get a light on the ethernet port of my router, but I get no working IP and no sign of my device's mac under DHCP or ARP (I've attached a screen shot to confirm this).

DHCP server entries

ScreenClip.png (63.93 KiB) Viewed 922 times

I have no clue what is wrong, but can only imagine that it's failing to request an IP through DHCP.

How can I access the device to determine what is wrong? If I boot the GoFlex Net without the thumb drive, or with another the green light on the front just flashes forever.

I've plugged the thumb drive into my laptop and the partition is called rootfs and has all the usual Linux folders - I've done a screen shot of this with the folders and size on disk displayed.

Folders and sizes

ScreenClip2.png (103.59 KiB) Viewed 922 times

So what next? I've seen mention of connecting with 'netconsole' on other posts, but the link no longer works. Is there another way to get SSL connectivity? Or can someone direct me how to recover and start again?

I'm familiar with the NSLU2 and have used one of those happily for a few years running Debian, but mine finally packed up the other day and the GoFlex Net was supposed to be the replacement.

Thanks so much in advance, BigDooley

[WarheadsSE]

Just checking.. whats the format of the drive you just read in Windows 7 ?

SSH not SSL

netconsole works fine.

[WarheadsSE]

Sorry, SSH - duh.

The filesystem is ext3

So you mean running nc -lup 6666 from a windows command prompt (of course with nc.exe in the folder) should work, or is it more complicated than that.

Oh, just had a squiz at /var/log/messages and seen the offering of a 192.168.1.5 ip. Now it works, after 10 reboots and nothing for hours. What the hell's that all about? It also shows in the DHCP table on the router, which it didn't before.

Hmmm, not solved though - seems to be hit and miss getting connectivity. It seems to boot up fine, but also seems to time out looking for a DHCP lease. Doesn't happen to my other devices. Since I can access the logs by plugging the stick ino my laptop, anyone want to look for a cause? I'll post the messages.log on here:

Code: Select all

Jan  1 11:00:19 alarm kernel: [    0.000000] Linux version 3.1.10-2-ARCH (root@platinum) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 PREEMPT Fri Feb 3 01:54:23 UTC 2012
Jan  1 11:00:19 alarm kernel: [    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
Jan  1 11:00:19 alarm kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Jan  1 11:00:19 alarm kernel: [    0.000000] Machine: Seagate GoFlex Net
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory policy: ECC disabled, Data cache writeback
Jan  1 11:00:19 alarm kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Jan  1 11:00:19 alarm kernel: [    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(pogoplug),-(root) root=/dev/sda1 rootdelay=10 rootfstype=auto netconsole=@10.10.10.6/eth0,@10.10.10.4/
Jan  1 11:00:19 alarm kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory: 128MB = 128MB total
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory: 120780k/120780k available, 10292k reserved, 0K highmem
Jan  1 11:00:19 alarm kernel: [    0.000000] Virtual kernel memory layout:
Jan  1 11:00:19 alarm kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     vmalloc : 0xc8800000 - 0xfe800000   ( 864 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .text : 0xc0008000 - 0xc053882c   (5315 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .init : 0xc0539000 - 0xc0564000   ( 172 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .data : 0xc0564000 - 0xc059af90   ( 220 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]        .bss : 0xc059afb4 - 0xc066540c   ( 810 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 11:00:19 alarm kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Jan  1 11:00:19 alarm kernel: [    0.000000] NR_IRQS:114
Jan  1 11:00:19 alarm kernel: [    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
Jan  1 11:00:19 alarm kernel: [    0.000000] Console: colour dummy device 80x30
Jan  1 11:00:19 alarm kernel: [    9.947923] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
Jan  1 11:00:19 alarm kernel: [   10.037858] pid_max: default: 32768 minimum: 301
Jan  1 11:00:19 alarm kernel: [   10.037953] Security Framework initialized
Jan  1 11:00:19 alarm kernel: [   10.037974] AppArmor: AppArmor disabled by boot time parameter
Jan  1 11:00:19 alarm kernel: [   10.038020] Mount-cache hash table entries: 512
Jan  1 11:00:19 alarm kernel: [   10.038347] CPU: Testing write buffer coherency: ok
Jan  1 11:00:19 alarm kernel: [   10.039115] devtmpfs: initialized
Jan  1 11:00:19 alarm kernel: [   10.040400] NET: Registered protocol family 16
Jan  1 11:00:19 alarm kernel: [   10.040864] Kirkwood: MV88F6281-A0, TCLK=200000000.
Jan  1 11:00:19 alarm kernel: [   10.040878] Feroceon L2: Cache support initialised.
Jan  1 11:00:19 alarm kernel: [   10.046233] bio: create slab <bio-0> at 0
Jan  1 11:00:19 alarm kernel: [   10.046593] vgaarb: loaded
Jan  1 11:00:19 alarm kernel: [   10.046849] SCSI subsystem initialized
Jan  1 11:00:19 alarm kernel: [   10.047196] usbcore: registered new interface driver usbfs
Jan  1 11:00:19 alarm kernel: [   10.047293] usbcore: registered new interface driver hub
Jan  1 11:00:19 alarm kernel: [   10.047391] usbcore: registered new device driver usb
Jan  1 11:00:19 alarm kernel: [   10.047986] Switching to clocksource orion_clocksource
Jan  1 11:00:19 alarm kernel: [   10.057865] Switched to NOHz mode on CPU #0
Jan  1 11:00:19 alarm kernel: [   10.058616] FS-Cache: Loaded
Jan  1 11:00:19 alarm kernel: [   10.068270] NET: Registered protocol family 2
Jan  1 11:00:19 alarm kernel: [   10.068499] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069156] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069256] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069310] TCP: Hash tables configured (established 4096 bind 4096)
Jan  1 11:00:19 alarm kernel: [   10.069319] TCP reno registered
Jan  1 11:00:19 alarm kernel: [   10.069330] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069352] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069578] NET: Registered protocol family 1
Jan  1 11:00:19 alarm kernel: [   10.069800] Trying to unpack rootfs image as initramfs...
Jan  1 11:00:19 alarm kernel: [   10.285616] Freeing initrd memory: 2576K
Jan  1 11:00:19 alarm kernel: [   10.286073] audit: initializing netlink socket (disabled)
Jan  1 11:00:19 alarm kernel: [   10.286113] type=2000 audit(0.330:1): initialized
Jan  1 11:00:19 alarm kernel: [   10.370426] VFS: Disk quotas dquot_6.5.2
Jan  1 11:00:19 alarm kernel: [   10.370680] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.373195] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Jan  1 11:00:19 alarm kernel: [   10.374574] aufs 3.1-20111107
Jan  1 11:00:19 alarm kernel: [   10.374596] msgmni has been set to 240
Jan  1 11:00:19 alarm kernel: [   10.375831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jan  1 11:00:19 alarm kernel: [   10.375846] io scheduler noop registered
Jan  1 11:00:19 alarm kernel: [   10.375854] io scheduler deadline registered
Jan  1 11:00:19 alarm kernel: [   10.375936] io scheduler cfq registered (default)
Jan  1 11:00:19 alarm kernel: [   10.376008] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
Jan  1 11:00:19 alarm kernel: [   10.376042] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
Jan  1 11:00:19 alarm kernel: [   10.408074] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
Jan  1 11:00:19 alarm kernel: [   10.448068] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
Jan  1 11:00:19 alarm kernel: [   10.488064] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
Jan  1 11:00:19 alarm kernel: [   10.528064] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
Jan  1 11:00:19 alarm kernel: [   10.533027] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jan  1 11:00:19 alarm kernel: [   10.553708] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
Jan  1 11:00:19 alarm kernel: [   10.553804] console [ttyS0] enabled
Jan  1 11:00:19 alarm kernel: [   10.559858] brd: module loaded
Jan  1 11:00:19 alarm kernel: [   10.562884] loop: module loaded
Jan  1 11:00:19 alarm kernel: [   10.563317] sata_mv sata_mv.0: slots 32 ports 2
Jan  1 11:00:19 alarm kernel: [   10.565011] scsi0 : sata_mv
Jan  1 11:00:19 alarm kernel: [   10.565402] scsi1 : sata_mv
Jan  1 11:00:19 alarm kernel: [   10.565620] ata1: SATA max UDMA/133 irq 21
Jan  1 11:00:19 alarm kernel: [   10.565631] ata2: SATA max UDMA/133 irq 21
Jan  1 11:00:19 alarm kernel: [   10.566337] ONFI flash detected
Jan  1 11:00:19 alarm kernel: [   10.566437] ONFI param page 0 valid
Jan  1 11:00:19 alarm kernel: [   10.566451] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08AAD)
Jan  1 11:00:19 alarm kernel: [   10.566473] Scanning device for bad blocks
Jan  1 11:00:19 alarm kernel: [   10.695163] Bad eraseblock 1716 at 0x00000d680000
Jan  1 11:00:19 alarm kernel: [   10.719952] 4 cmdlinepart partitions found on MTD device orion_nand
Jan  1 11:00:19 alarm kernel: [   10.719964] Creating 4 MTD partitions on "orion_nand":
Jan  1 11:00:19 alarm kernel: [   10.719978] 0x000000000000-0x000000100000 : "u-boot"
Jan  1 11:00:19 alarm kernel: [   10.720936] 0x000000100000-0x000000500000 : "uImage"
Jan  1 11:00:19 alarm kernel: [   10.721799] 0x000000500000-0x000002500000 : "pogoplug"
Jan  1 11:00:19 alarm kernel: [   10.722629] 0x000002500000-0x000010000000 : "root"
Jan  1 11:00:19 alarm kernel: [   10.724308] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
Jan  1 11:00:19 alarm kernel: [   10.724408] mv643xx_eth smi: probed
Jan  1 11:00:19 alarm kernel: [   10.726445] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 02:50:43:8b:77:87
Jan  1 11:00:19 alarm kernel: [   10.726558] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 11:00:19 alarm kernel: [   10.726614] orion-ehci orion-ehci.0: Marvell Orion EHCI
Jan  1 11:00:19 alarm kernel: [   10.726685] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Jan  1 11:00:19 alarm kernel: [   10.748040] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
Jan  1 11:00:19 alarm kernel: [   10.768023] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Jan  1 11:00:19 alarm kernel: [   10.768614] hub 1-0:1.0: USB hub found
Jan  1 11:00:19 alarm kernel: [   10.768637] hub 1-0:1.0: 1 port detected
Jan  1 11:00:19 alarm kernel: [   10.769137] Initializing USB Mass Storage driver...
Jan  1 11:00:19 alarm kernel: [   10.769245] usbcore: registered new interface driver usb-storage
Jan  1 11:00:19 alarm kernel: [   10.769254] USB Mass Storage support registered.
Jan  1 11:00:19 alarm kernel: [   10.769342] usbcore: registered new interface driver libusual
Jan  1 11:00:19 alarm kernel: [   10.769654] mousedev: PS/2 mouse device common for all mice
Jan  1 11:00:19 alarm kernel: [   11.088045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
Jan  1 11:00:19 alarm kernel: [   11.088206] usb 1-1: new high speed USB device number 2 using orion-ehci
Jan  1 11:00:19 alarm kernel: [   11.128071] ata1.00: ATA-8: ST1000LM010-9YH146, CC9F, max UDMA/133
Jan  1 11:00:19 alarm kernel: [   11.128085] ata1.00: 1953525168 sectors, multi 0: LBA48
Jan  1 11:00:19 alarm kernel: [   11.188071] ata1.00: configured for UDMA/133
Jan  1 11:00:19 alarm kernel: [   11.188412] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM010-9YH1 CC9F PQ: 0 ANSI: 5
Jan  1 11:00:19 alarm kernel: [   11.189141] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan  1 11:00:19 alarm kernel: [   11.189587] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Jan  1 11:00:19 alarm kernel: [   11.189601] sd 0:0:0:0: [sda] 4096-byte physical blocks
Jan  1 11:00:19 alarm kernel: [   11.189838] sd 0:0:0:0: [sda] Write Protect is off
Jan  1 11:00:19 alarm kernel: [   11.189955] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 11:00:19 alarm kernel: [   11.206083]  sda: sda1
Jan  1 11:00:19 alarm kernel: [   11.207031] sd 0:0:0:0: [sda] Attached SCSI disk
Jan  1 11:00:19 alarm kernel: [   11.239827] scsi2 : usb-storage 1-1:1.0
Jan  1 11:00:19 alarm kernel: [   11.538039] ata2: SATA link down (SStatus 0 SControl F300)
Jan  1 11:00:19 alarm kernel: [   11.783106] sdhci: Secure Digital Host Controller Interface driver
Jan  1 11:00:19 alarm kernel: [   11.783116] sdhci: Copyright(c) Pierre Ossman
Jan  1 11:00:19 alarm kernel: [   11.783183] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 11:00:19 alarm kernel: [   11.784363] usbcore: registered new interface driver r8712u
Jan  1 11:00:19 alarm kernel: [   11.785207] GRE over IPv4 demultiplexor driver
Jan  1 11:00:19 alarm kernel: [   11.785345] TCP cubic registered
Jan  1 11:00:19 alarm kernel: [   11.785357] NET: Registered protocol family 17
Jan  1 11:00:19 alarm kernel: [   11.785435] lib80211: common routines for IEEE802.11 drivers
Jan  1 11:00:19 alarm kernel: [   11.785456] Registering the dns_resolver key type
Jan  1 11:00:19 alarm kernel: [   11.786038] registered taskstats version 1
Jan  1 11:00:19 alarm kernel: [   11.786684] netconsole: local port 6665
Jan  1 11:00:19 alarm kernel: [   11.786696] netconsole: local IP 10.10.10.6
Jan  1 11:00:19 alarm kernel: [   11.786704] netconsole: interface 'eth0'
Jan  1 11:00:19 alarm kernel: [   11.786711] netconsole: remote port 6666
Jan  1 11:00:19 alarm kernel: [   11.786719] netconsole: remote IP 10.10.10.4
Jan  1 11:00:19 alarm kernel: [   11.786727] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
Jan  1 11:00:19 alarm kernel: [   11.786738] netconsole: device eth0 not up yet, forcing it
Jan  1 11:00:19 alarm kernel: [   12.238810] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.20 PQ: 0 ANSI: 5
Jan  1 11:00:19 alarm kernel: [   12.239541] sd 2:0:0:0: Attached scsi generic sg1 type 0
Jan  1 11:00:19 alarm kernel: [   12.240387] sd 2:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
Jan  1 11:00:19 alarm kernel: [   12.241750] sd 2:0:0:0: [sdb] Write Protect is off
Jan  1 11:00:19 alarm kernel: [   12.242499] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 11:00:19 alarm kernel: [   12.247577]  sdb: sdb1
Jan  1 11:00:19 alarm kernel: [   12.250242] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jan  1 11:00:19 alarm kernel: [   15.808020] netconsole: timeout waiting for carrier
Jan  1 11:00:19 alarm kernel: [   15.808225] console [netcon0] enabled
Jan  1 11:00:19 alarm kernel: [   15.808233] netconsole: network logging started
Jan  1 11:00:19 alarm kernel: [   15.815368] Freeing init memory: 172K
Jan  1 11:00:19 alarm kernel: [   26.562673] kjournald starting.  Commit interval 5 seconds
Jan  1 11:00:19 alarm kernel: [   26.564258] EXT3-fs (sdb1): using internal journal
Jan  1 11:00:19 alarm kernel: [   26.564276] EXT3-fs (sdb1): mounted filesystem with writeback data mode
Jan  1 11:00:19 alarm [   27.853820] udevd[170]: starting version 180
Jan  1 11:00:19 alarm kernel: [   28.702543] EXT3-fs (sdb1): using internal journal
Jan  1 11:00:19 alarm dhcpcd[336]: version 5.2.12 starting
Jan  1 11:00:19 alarm dhcpcd[336]: eth0: broadcasting for a lease
Jan  1 11:00:50 alarm kernel: [   61.239375] NET: Registered protocol family 10
Jan  1 11:00:50 alarm kernel: [   61.243188] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan  1 11:02:49 alarm kernel: [  180.328958] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan  1 11:02:49 alarm kernel: [  180.329090] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan  1 11:00:19 alarm kernel: [    0.000000] Linux version 3.1.10-2-ARCH (root@platinum) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 PREEMPT Fri Feb 3 01:54:23 UTC 2012
Jan  1 11:00:19 alarm kernel: [    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
Jan  1 11:00:19 alarm kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Jan  1 11:00:19 alarm kernel: [    0.000000] Machine: Seagate GoFlex Net
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory policy: ECC disabled, Data cache writeback
Jan  1 11:00:19 alarm kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Jan  1 11:00:19 alarm kernel: [    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(pogoplug),-(root) root=/dev/sda1 rootdelay=10 rootfstype=auto netconsole=@10.10.10.6/eth0,@10.10.10.4/
Jan  1 11:00:19 alarm kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory: 128MB = 128MB total
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory: 120780k/120780k available, 10292k reserved, 0K highmem
Jan  1 11:00:19 alarm kernel: [    0.000000] Virtual kernel memory layout:
Jan  1 11:00:19 alarm kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     vmalloc : 0xc8800000 - 0xfe800000   ( 864 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .text : 0xc0008000 - 0xc053882c   (5315 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .init : 0xc0539000 - 0xc0564000   ( 172 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .data : 0xc0564000 - 0xc059af90   ( 220 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]        .bss : 0xc059afb4 - 0xc066540c   ( 810 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 11:00:19 alarm kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Jan  1 11:00:19 alarm kernel: [    0.000000] NR_IRQS:114
Jan  1 11:00:19 alarm kernel: [    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
Jan  1 11:00:19 alarm kernel: [    0.000000] Console: colour dummy device 80x30
Jan  1 11:00:19 alarm kernel: [    9.947815] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
Jan  1 11:00:19 alarm kernel: [   10.037751] pid_max: default: 32768 minimum: 301
Jan  1 11:00:19 alarm kernel: [   10.037846] Security Framework initialized
Jan  1 11:00:19 alarm kernel: [   10.037867] AppArmor: AppArmor disabled by boot time parameter
Jan  1 11:00:19 alarm kernel: [   10.037913] Mount-cache hash table entries: 512
Jan  1 11:00:19 alarm kernel: [   10.038239] CPU: Testing write buffer coherency: ok
Jan  1 11:00:19 alarm kernel: [   10.039010] devtmpfs: initialized
Jan  1 11:00:19 alarm kernel: [   10.040294] NET: Registered protocol family 16
Jan  1 11:00:19 alarm kernel: [   10.040758] Kirkwood: MV88F6281-A0, TCLK=200000000.
Jan  1 11:00:19 alarm kernel: [   10.040771] Feroceon L2: Cache support initialised.
Jan  1 11:00:19 alarm kernel: [   10.046126] bio: create slab <bio-0> at 0
Jan  1 11:00:19 alarm kernel: [   10.046486] vgaarb: loaded
Jan  1 11:00:19 alarm kernel: [   10.046741] SCSI subsystem initialized
Jan  1 11:00:19 alarm kernel: [   10.047087] usbcore: registered new interface driver usbfs
Jan  1 11:00:19 alarm kernel: [   10.047186] usbcore: registered new interface driver hub
Jan  1 11:00:19 alarm kernel: [   10.047285] usbcore: registered new device driver usb
Jan  1 11:00:19 alarm kernel: [   10.047879] Switching to clocksource orion_clocksource
Jan  1 11:00:19 alarm kernel: [   10.057756] Switched to NOHz mode on CPU #0
Jan  1 11:00:19 alarm kernel: [   10.058507] FS-Cache: Loaded
Jan  1 11:00:19 alarm kernel: [   10.068156] NET: Registered protocol family 2
Jan  1 11:00:19 alarm kernel: [   10.068384] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069043] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069142] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069196] TCP: Hash tables configured (established 4096 bind 4096)
Jan  1 11:00:19 alarm kernel: [   10.069205] TCP reno registered
Jan  1 11:00:19 alarm kernel: [   10.069216] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069238] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069463] NET: Registered protocol family 1
Jan  1 11:00:19 alarm kernel: [   10.069686] Trying to unpack rootfs image as initramfs...
Jan  1 11:00:19 alarm kernel: [   10.285452] Freeing initrd memory: 2576K
Jan  1 11:00:19 alarm kernel: [   10.285912] audit: initializing netlink socket (disabled)
Jan  1 11:00:19 alarm kernel: [   10.285952] type=2000 audit(0.330:1): initialized
Jan  1 11:00:19 alarm kernel: [   10.370131] VFS: Disk quotas dquot_6.5.2
Jan  1 11:00:19 alarm kernel: [   10.370385] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.372910] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Jan  1 11:00:19 alarm kernel: [   10.374287] aufs 3.1-20111107
Jan  1 11:00:19 alarm kernel: [   10.374308] msgmni has been set to 240
Jan  1 11:00:19 alarm kernel: [   10.375546] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jan  1 11:00:19 alarm kernel: [   10.375561] io scheduler noop registered
Jan  1 11:00:19 alarm kernel: [   10.375569] io scheduler deadline registered
Jan  1 11:00:19 alarm kernel: [   10.375651] io scheduler cfq registered (default)
Jan  1 11:00:19 alarm kernel: [   10.375724] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
Jan  1 11:00:19 alarm kernel: [   10.375758] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
Jan  1 11:00:19 alarm kernel: [   10.407965] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
Jan  1 11:00:19 alarm kernel: [   10.447961] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
Jan  1 11:00:19 alarm kernel: [   10.487957] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
Jan  1 11:00:19 alarm kernel: [   10.527958] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
Jan  1 11:00:19 alarm kernel: [   10.532921] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jan  1 11:00:19 alarm kernel: [   10.553600] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
Jan  1 11:00:19 alarm kernel: [   10.553695] console [ttyS0] enabled
Jan  1 11:00:19 alarm kernel: [   10.559735] brd: module loaded
Jan  1 11:00:19 alarm kernel: [   10.562753] loop: module loaded
Jan  1 11:00:19 alarm kernel: [   10.563188] sata_mv sata_mv.0: slots 32 ports 2
Jan  1 11:00:19 alarm kernel: [   10.564878] scsi0 : sata_mv
Jan  1 11:00:19 alarm kernel: [   10.565269] scsi1 : sata_mv
Jan  1 11:00:19 alarm kernel: [   10.565486] ata1: SATA max UDMA/133 irq 21
Jan  1 11:00:19 alarm kernel: [   10.565497] ata2: SATA max UDMA/133 irq 21
Jan  1 11:00:19 alarm kernel: [   10.566206] ONFI flash detected
Jan  1 11:00:19 alarm kernel: [   10.566305] ONFI param page 0 valid
Jan  1 11:00:19 alarm kernel: [   10.566319] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08AAD)
Jan  1 11:00:19 alarm kernel: [   10.566340] Scanning device for bad blocks
Jan  1 11:00:19 alarm kernel: [   10.695015] Bad eraseblock 1716 at 0x00000d680000
Jan  1 11:00:19 alarm kernel: [   10.719803] 4 cmdlinepart partitions found on MTD device orion_nand
Jan  1 11:00:19 alarm kernel: [   10.719815] Creating 4 MTD partitions on "orion_nand":
Jan  1 11:00:19 alarm kernel: [   10.719829] 0x000000000000-0x000000100000 : "u-boot"
Jan  1 11:00:19 alarm kernel: [   10.720776] 0x000000100000-0x000000500000 : "uImage"
Jan  1 11:00:19 alarm kernel: [   10.721633] 0x000000500000-0x000002500000 : "pogoplug"
Jan  1 11:00:19 alarm kernel: [   10.722456] 0x000002500000-0x000010000000 : "root"
Jan  1 11:00:19 alarm kernel: [   10.724130] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
Jan  1 11:00:19 alarm kernel: [   10.724231] mv643xx_eth smi: probed
Jan  1 11:00:19 alarm kernel: [   10.726278] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 02:50:43:8b:77:87
Jan  1 11:00:19 alarm kernel: [   10.726392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 11:00:19 alarm kernel: [   10.726447] orion-ehci orion-ehci.0: Marvell Orion EHCI
Jan  1 11:00:19 alarm kernel: [   10.726517] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Jan  1 11:00:19 alarm kernel: [   10.747934] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
Jan  1 11:00:19 alarm kernel: [   10.767917] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Jan  1 11:00:19 alarm kernel: [   10.768506] hub 1-0:1.0: USB hub found
Jan  1 11:00:19 alarm kernel: [   10.768529] hub 1-0:1.0: 1 port detected
Jan  1 11:00:19 alarm kernel: [   10.769023] Initializing USB Mass Storage driver...
Jan  1 11:00:19 alarm kernel: [   10.769131] usbcore: registered new interface driver usb-storage
Jan  1 11:00:19 alarm kernel: [   10.769141] USB Mass Storage support registered.
Jan  1 11:00:19 alarm kernel: [   10.769228] usbcore: registered new interface driver libusual
Jan  1 11:00:19 alarm kernel: [   10.769541] mousedev: PS/2 mouse device common for all mice
Jan  1 11:00:19 alarm kernel: [   11.087939] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
Jan  1 11:00:19 alarm kernel: [   11.088099] usb 1-1: new high speed USB device number 2 using orion-ehci
Jan  1 11:00:19 alarm kernel: [   11.127965] ata1.00: ATA-8: ST1000LM010-9YH146, CC9F, max UDMA/133
Jan  1 11:00:19 alarm kernel: [   11.127979] ata1.00: 1953525168 sectors, multi 0: LBA48
Jan  1 11:00:19 alarm kernel: [   11.187964] ata1.00: configured for UDMA/133
Jan  1 11:00:19 alarm kernel: [   11.188306] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM010-9YH1 CC9F PQ: 0 ANSI: 5
Jan  1 11:00:19 alarm kernel: [   11.189031] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan  1 11:00:19 alarm kernel: [   11.189478] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Jan  1 11:00:19 alarm kernel: [   11.189492] sd 0:0:0:0: [sda] 4096-byte physical blocks
Jan  1 11:00:19 alarm kernel: [   11.189730] sd 0:0:0:0: [sda] Write Protect is off
Jan  1 11:00:19 alarm kernel: [   11.189848] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 11:00:19 alarm kernel: [   11.233201]  sda: sda1
Jan  1 11:00:19 alarm kernel: [   11.234158] sd 0:0:0:0: [sda] Attached SCSI disk
Jan  1 11:00:19 alarm kernel: [   11.239723] scsi2 : usb-storage 1-1:1.0
Jan  1 11:00:19 alarm kernel: [   11.537932] ata2: SATA link down (SStatus 0 SControl F300)
Jan  1 11:00:19 alarm kernel: [   11.782995] sdhci: Secure Digital Host Controller Interface driver
Jan  1 11:00:19 alarm kernel: [   11.783006] sdhci: Copyright(c) Pierre Ossman
Jan  1 11:00:19 alarm kernel: [   11.783075] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 11:00:19 alarm kernel: [   11.784256] usbcore: registered new interface driver r8712u
Jan  1 11:00:19 alarm kernel: [   11.785099] GRE over IPv4 demultiplexor driver
Jan  1 11:00:19 alarm kernel: [   11.785237] TCP cubic registered
Jan  1 11:00:19 alarm kernel: [   11.785249] NET: Registered protocol family 17
Jan  1 11:00:19 alarm kernel: [   11.785328] lib80211: common routines for IEEE802.11 drivers
Jan  1 11:00:19 alarm kernel: [   11.785349] Registering the dns_resolver key type
Jan  1 11:00:19 alarm kernel: [   11.785918] registered taskstats version 1
Jan  1 11:00:19 alarm kernel: [   11.786564] netconsole: local port 6665
Jan  1 11:00:19 alarm kernel: [   11.786576] netconsole: local IP 10.10.10.6
Jan  1 11:00:19 alarm kernel: [   11.786584] netconsole: interface 'eth0'
Jan  1 11:00:19 alarm kernel: [   11.786591] netconsole: remote port 6666
Jan  1 11:00:19 alarm kernel: [   11.786599] netconsole: remote IP 10.10.10.4
Jan  1 11:00:19 alarm kernel: [   11.786607] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
Jan  1 11:00:19 alarm kernel: [   11.786619] netconsole: device eth0 not up yet, forcing it
Jan  1 11:00:19 alarm kernel: [   12.238705] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.20 PQ: 0 ANSI: 5
Jan  1 11:00:19 alarm kernel: [   12.239436] sd 2:0:0:0: Attached scsi generic sg1 type 0
Jan  1 11:00:19 alarm kernel: [   12.240657] sd 2:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
Jan  1 11:00:19 alarm kernel: [   12.241769] sd 2:0:0:0: [sdb] Write Protect is off
Jan  1 11:00:19 alarm kernel: [   12.242519] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 11:00:19 alarm kernel: [   12.248096]  sdb: sdb1
Jan  1 11:00:19 alarm kernel: [   12.250761] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jan  1 11:00:19 alarm kernel: [   15.807913] netconsole: timeout waiting for carrier
Jan  1 11:00:19 alarm kernel: [   15.808120] console [netcon0] enabled
Jan  1 11:00:19 alarm kernel: [   15.808128] netconsole: network logging started
Jan  1 11:00:19 alarm kernel: [   15.815273] Freeing init memory: 172K
Jan  1 11:00:19 alarm kernel: [   26.807211] kjournald starting.  Commit interval 5 seconds
Jan  1 11:00:19 alarm kernel: [   26.808774] EXT3-fs (sdb1): using internal journal
Jan  1 11:00:19 alarm kernel: [   26.808786] EXT3-fs (sdb1): recovery complete
Jan  1 11:00:19 alarm kernel: [   26.810532] EXT3-fs (sdb1): mounted filesystem with writeback data mode
Jan  1 11:00:19 alarm [   27.993209] udevd[170]: starting version 180
Jan  1 11:00:19 alarm kernel: [   28.884689] EXT3-fs (sdb1): using internal journal
Jan  1 11:00:19 alarm dhcpcd[359]: version 5.2.12 starting
Jan  1 11:00:19 alarm dhcpcd[359]: eth0: broadcasting for a lease
Jan  1 11:00:41 alarm kernel: [   52.450272] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan  1 11:00:48 alarm dhcpcd[359]: eth0: offered 192.168.1.5 from 192.168.1.251
Jan  1 11:00:48 alarm dhcpcd[359]: eth0: acknowledged 192.168.1.5 from 192.168.1.251
Jan  1 11:00:48 alarm dhcpcd[359]: eth0: checking for 192.168.1.5
Jan  1 11:00:50 alarm kernel: [   61.458341] NET: Registered protocol family 10
Jan  1 11:00:19 alarm kernel: [    0.000000] Linux version 3.1.10-2-ARCH (root@platinum) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 PREEMPT Fri Feb 3 01:54:23 UTC 2012
Jan  1 11:00:19 alarm kernel: [    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
Jan  1 11:00:19 alarm kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Jan  1 11:00:19 alarm kernel: [    0.000000] Machine: Seagate GoFlex Net
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory policy: ECC disabled, Data cache writeback
Jan  1 11:00:19 alarm kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Jan  1 11:00:19 alarm kernel: [    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(pogoplug),-(root) root=/dev/sda1 rootdelay=10 rootfstype=auto netconsole=@10.10.10.6/eth0,@10.10.10.4/
Jan  1 11:00:19 alarm kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory: 128MB = 128MB total
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory: 120780k/120780k available, 10292k reserved, 0K highmem
Jan  1 11:00:19 alarm kernel: [    0.000000] Virtual kernel memory layout:
Jan  1 11:00:19 alarm kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     vmalloc : 0xc8800000 - 0xfe800000   ( 864 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .text : 0xc0008000 - 0xc053882c   (5315 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .init : 0xc0539000 - 0xc0564000   ( 172 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .data : 0xc0564000 - 0xc059af90   ( 220 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]        .bss : 0xc059afb4 - 0xc066540c   ( 810 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 11:00:19 alarm kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Jan  1 11:00:19 alarm kernel: [    0.000000] NR_IRQS:114
Jan  1 11:00:19 alarm kernel: [    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
Jan  1 11:00:19 alarm kernel: [    0.000000] Console: colour dummy device 80x30
Jan  1 11:00:19 alarm kernel: [    9.947938] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
Jan  1 11:00:19 alarm kernel: [   10.037874] pid_max: default: 32768 minimum: 301
Jan  1 11:00:19 alarm kernel: [   10.037968] Security Framework initialized
Jan  1 11:00:19 alarm kernel: [   10.037989] AppArmor: AppArmor disabled by boot time parameter
Jan  1 11:00:19 alarm kernel: [   10.038035] Mount-cache hash table entries: 512
Jan  1 11:00:19 alarm kernel: [   10.038362] CPU: Testing write buffer coherency: ok
Jan  1 11:00:19 alarm kernel: [   10.039130] devtmpfs: initialized
Jan  1 11:00:19 alarm kernel: [   10.040416] NET: Registered protocol family 16
Jan  1 11:00:19 alarm kernel: [   10.040880] Kirkwood: MV88F6281-A0, TCLK=200000000.
Jan  1 11:00:19 alarm kernel: [   10.040893] Feroceon L2: Cache support initialised.
Jan  1 11:00:19 alarm kernel: [   10.046248] bio: create slab <bio-0> at 0
Jan  1 11:00:19 alarm kernel: [   10.046608] vgaarb: loaded
Jan  1 11:00:19 alarm kernel: [   10.046865] SCSI subsystem initialized
Jan  1 11:00:19 alarm kernel: [   10.047211] usbcore: registered new interface driver usbfs
Jan  1 11:00:19 alarm kernel: [   10.047309] usbcore: registered new interface driver hub
Jan  1 11:00:19 alarm kernel: [   10.047407] usbcore: registered new device driver usb
Jan  1 11:00:19 alarm kernel: [   10.048002] Switching to clocksource orion_clocksource
Jan  1 11:00:19 alarm kernel: [   10.057880] Switched to NOHz mode on CPU #0
Jan  1 11:00:19 alarm kernel: [   10.058638] FS-Cache: Loaded
Jan  1 11:00:19 alarm kernel: [   10.068282] NET: Registered protocol family 2
Jan  1 11:00:19 alarm kernel: [   10.068512] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069175] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069275] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069329] TCP: Hash tables configured (established 4096 bind 4096)
Jan  1 11:00:19 alarm kernel: [   10.069339] TCP reno registered
Jan  1 11:00:19 alarm kernel: [   10.069349] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069372] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069597] NET: Registered protocol family 1
Jan  1 11:00:19 alarm kernel: [   10.069822] Trying to unpack rootfs image as initramfs...
Jan  1 11:00:19 alarm kernel: [   10.285648] Freeing initrd memory: 2576K
Jan  1 11:00:19 alarm kernel: [   10.286105] audit: initializing netlink socket (disabled)
Jan  1 11:00:19 alarm kernel: [   10.286146] type=2000 audit(0.330:1): initialized
Jan  1 11:00:19 alarm kernel: [   10.370397] VFS: Disk quotas dquot_6.5.2
Jan  1 11:00:19 alarm kernel: [   10.370652] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.373176] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Jan  1 11:00:19 alarm kernel: [   10.374559] aufs 3.1-20111107
Jan  1 11:00:19 alarm kernel: [   10.374581] msgmni has been set to 240
Jan  1 11:00:19 alarm kernel: [   10.375821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jan  1 11:00:19 alarm kernel: [   10.375836] io scheduler noop registered
Jan  1 11:00:19 alarm kernel: [   10.375844] io scheduler deadline registered
Jan  1 11:00:19 alarm kernel: [   10.375928] io scheduler cfq registered (default)
Jan  1 11:00:19 alarm kernel: [   10.376001] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
Jan  1 11:00:19 alarm kernel: [   10.376034] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
Jan  1 11:00:19 alarm kernel: [   10.408089] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
Jan  1 11:00:19 alarm kernel: [   10.448084] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
Jan  1 11:00:19 alarm kernel: [   10.488080] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
Jan  1 11:00:19 alarm kernel: [   10.528080] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
Jan  1 11:00:19 alarm kernel: [   10.533050] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jan  1 11:00:19 alarm kernel: [   10.553734] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
Jan  1 11:00:19 alarm kernel: [   10.553829] console [ttyS0] enabled
Jan  1 11:00:19 alarm kernel: [   10.559874] brd: module loaded
Jan  1 11:00:19 alarm kernel: [   10.562898] loop: module loaded
Jan  1 11:00:19 alarm kernel: [   10.563333] sata_mv sata_mv.0: slots 32 ports 2
Jan  1 11:00:19 alarm kernel: [   10.565030] scsi0 : sata_mv
Jan  1 11:00:19 alarm kernel: [   10.565418] scsi1 : sata_mv
Jan  1 11:00:19 alarm kernel: [   10.565635] ata1: SATA max UDMA/133 irq 21
Jan  1 11:00:19 alarm kernel: [   10.565646] ata2: SATA max UDMA/133 irq 21
Jan  1 11:00:19 alarm kernel: [   10.566353] ONFI flash detected
Jan  1 11:00:19 alarm kernel: [   10.566452] ONFI param page 0 valid
Jan  1 11:00:19 alarm kernel: [   10.566466] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08AAD)
Jan  1 11:00:19 alarm kernel: [   10.566487] Scanning device for bad blocks
Jan  1 11:00:19 alarm kernel: [   10.695164] Bad eraseblock 1716 at 0x00000d680000
Jan  1 11:00:19 alarm kernel: [   10.719953] 4 cmdlinepart partitions found on MTD device orion_nand
Jan  1 11:00:19 alarm kernel: [   10.719965] Creating 4 MTD partitions on "orion_nand":
Jan  1 11:00:19 alarm kernel: [   10.719979] 0x000000000000-0x000000100000 : "u-boot"
Jan  1 11:00:19 alarm kernel: [   10.720933] 0x000000100000-0x000000500000 : "uImage"
Jan  1 11:00:19 alarm kernel: [   10.721796] 0x000000500000-0x000002500000 : "pogoplug"
Jan  1 11:00:19 alarm kernel: [   10.722628] 0x000002500000-0x000010000000 : "root"
Jan  1 11:00:19 alarm kernel: [   10.724308] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
Jan  1 11:00:19 alarm kernel: [   10.724409] mv643xx_eth smi: probed
Jan  1 11:00:19 alarm kernel: [   10.726433] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 02:50:43:8b:77:87
Jan  1 11:00:19 alarm kernel: [   10.726546] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 11:00:19 alarm kernel: [   10.726601] orion-ehci orion-ehci.0: Marvell Orion EHCI
Jan  1 11:00:19 alarm kernel: [   10.726673] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Jan  1 11:00:19 alarm kernel: [   10.748056] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
Jan  1 11:00:19 alarm kernel: [   10.768039] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Jan  1 11:00:19 alarm kernel: [   10.768629] hub 1-0:1.0: USB hub found
Jan  1 11:00:19 alarm kernel: [   10.768653] hub 1-0:1.0: 1 port detected
Jan  1 11:00:19 alarm kernel: [   10.769152] Initializing USB Mass Storage driver...
Jan  1 11:00:19 alarm kernel: [   10.769261] usbcore: registered new interface driver usb-storage
Jan  1 11:00:19 alarm kernel: [   10.769270] USB Mass Storage support registered.
Jan  1 11:00:19 alarm kernel: [   10.769357] usbcore: registered new interface driver libusual
Jan  1 11:00:19 alarm kernel: [   10.769670] mousedev: PS/2 mouse device common for all mice
Jan  1 11:00:19 alarm kernel: [   10.928055] ata1: SATA link down (SStatus 0 SControl F300)
Jan  1 11:00:19 alarm kernel: [   11.088052] usb 1-1: new high speed USB device number 2 using orion-ehci
Jan  1 11:00:19 alarm kernel: [   11.239807] scsi2 : usb-storage 1-1:1.0
Jan  1 11:00:19 alarm kernel: [   11.278053] ata2: SATA link down (SStatus 0 SControl F300)
Jan  1 11:00:19 alarm kernel: [   11.783110] sdhci: Secure Digital Host Controller Interface driver
Jan  1 11:00:19 alarm kernel: [   11.783121] sdhci: Copyright(c) Pierre Ossman
Jan  1 11:00:19 alarm kernel: [   11.783189] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 11:00:19 alarm kernel: [   11.784501] usbcore: registered new interface driver r8712u
Jan  1 11:00:19 alarm kernel: [   11.785340] GRE over IPv4 demultiplexor driver
Jan  1 11:00:19 alarm kernel: [   11.785478] TCP cubic registered
Jan  1 11:00:19 alarm kernel: [   11.785490] NET: Registered protocol family 17
Jan  1 11:00:19 alarm kernel: [   11.785572] lib80211: common routines for IEEE802.11 drivers
Jan  1 11:00:19 alarm kernel: [   11.785593] Registering the dns_resolver key type
Jan  1 11:00:19 alarm kernel: [   11.786172] registered taskstats version 1
Jan  1 11:00:19 alarm kernel: [   11.786822] netconsole: local port 6665
Jan  1 11:00:19 alarm kernel: [   11.786834] netconsole: local IP 10.10.10.6
Jan  1 11:00:19 alarm kernel: [   11.786842] netconsole: interface 'eth0'
Jan  1 11:00:19 alarm kernel: [   11.786849] netconsole: remote port 6666
Jan  1 11:00:19 alarm kernel: [   11.786857] netconsole: remote IP 10.10.10.4
Jan  1 11:00:19 alarm kernel: [   11.786865] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
Jan  1 11:00:19 alarm kernel: [   11.786876] netconsole: device eth0 not up yet, forcing it
Jan  1 11:00:19 alarm kernel: [   12.238831] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.20 PQ: 0 ANSI: 5
Jan  1 11:00:19 alarm kernel: [   12.239556] sd 2:0:0:0: Attached scsi generic sg0 type 0
Jan  1 11:00:19 alarm kernel: [   12.240402] sd 2:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
Jan  1 11:00:19 alarm kernel: [   12.241764] sd 2:0:0:0: [sda] Write Protect is off
Jan  1 11:00:19 alarm kernel: [   12.242516] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 11:00:19 alarm kernel: [   12.247592]  sda: sda1
Jan  1 11:00:19 alarm kernel: [   12.250257] sd 2:0:0:0: [sda] Attached SCSI removable disk
Jan  1 11:00:19 alarm kernel: [   15.808036] netconsole: timeout waiting for carrier
Jan  1 11:00:19 alarm kernel: [   15.808232] console [netcon0] enabled
Jan  1 11:00:19 alarm kernel: [   15.808240] netconsole: network logging started
Jan  1 11:00:19 alarm kernel: [   15.815385] Freeing init memory: 172K
Jan  1 11:00:19 alarm kernel: [   26.552577] kjournald starting.  Commit interval 5 seconds
Jan  1 11:00:19 alarm kernel: [   26.554274] EXT3-fs (sda1): using internal journal
Jan  1 11:00:19 alarm kernel: [   26.554286] EXT3-fs (sda1): recovery complete
Jan  1 11:00:19 alarm kernel: [   26.555893] EXT3-fs (sda1): mounted filesystem with writeback data mode
Jan  1 11:00:19 alarm [   27.723679] udevd[167]: starting version 180
Jan  1 11:00:19 alarm kernel: [   28.494184] EXT3-fs (sda1): using internal journal
Jan  1 11:00:19 alarm dhcpcd[333]: version 5.2.12 starting
Jan  1 11:00:19 alarm dhcpcd[333]: eth0: broadcasting for a lease
Jan  1 11:00:50 alarm kernel: [   61.029361] NET: Registered protocol family 10
Jan  1 11:00:50 alarm kernel: [   61.033189] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan  1 11:01:19 alarm kernel: [   89.945127] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan  1 11:01:19 alarm kernel: [   89.945243] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan  1 11:21:19 alarm -- MARK --
Jan  1 11:41:19 alarm -- MARK --
Jan  1 12:21:01 alarm -- MARK --
Jan  1 11:00:19 alarm kernel: [    0.000000] Linux version 3.1.10-2-ARCH (root@platinum) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 PREEMPT Fri Feb 3 01:54:23 UTC 2012
Jan  1 11:00:19 alarm kernel: [    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
Jan  1 11:00:19 alarm kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Jan  1 11:00:19 alarm kernel: [    0.000000] Machine: Seagate GoFlex Net
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory policy: ECC disabled, Data cache writeback
Jan  1 11:00:19 alarm kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Jan  1 11:00:19 alarm kernel: [    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(pogoplug),-(root) root=/dev/sda1 rootdelay=10 rootfstype=auto netconsole=@10.10.10.6/eth0,@10.10.10.4/
Jan  1 11:00:19 alarm kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory: 128MB = 128MB total
Jan  1 11:00:19 alarm kernel: [    0.000000] Memory: 120780k/120780k available, 10292k reserved, 0K highmem
Jan  1 11:00:19 alarm kernel: [    0.000000] Virtual kernel memory layout:
Jan  1 11:00:19 alarm kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     vmalloc : 0xc8800000 - 0xfe800000   ( 864 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .text : 0xc0008000 - 0xc053882c   (5315 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .init : 0xc0539000 - 0xc0564000   ( 172 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]       .data : 0xc0564000 - 0xc059af90   ( 220 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000]        .bss : 0xc059afb4 - 0xc066540c   ( 810 kB)
Jan  1 11:00:19 alarm kernel: [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 11:00:19 alarm kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Jan  1 11:00:19 alarm kernel: [    0.000000] NR_IRQS:114
Jan  1 11:00:19 alarm kernel: [    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
Jan  1 11:00:19 alarm kernel: [    0.000000] Console: colour dummy device 80x30
Jan  1 11:00:19 alarm kernel: [    9.947781] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
Jan  1 11:00:19 alarm kernel: [   10.037717] pid_max: default: 32768 minimum: 301
Jan  1 11:00:19 alarm kernel: [   10.037812] Security Framework initialized
Jan  1 11:00:19 alarm kernel: [   10.037832] AppArmor: AppArmor disabled by boot time parameter
Jan  1 11:00:19 alarm kernel: [   10.037878] Mount-cache hash table entries: 512
Jan  1 11:00:19 alarm kernel: [   10.038206] CPU: Testing write buffer coherency: ok
Jan  1 11:00:19 alarm kernel: [   10.038973] devtmpfs: initialized
Jan  1 11:00:19 alarm kernel: [   10.040259] NET: Registered protocol family 16
Jan  1 11:00:19 alarm kernel: [   10.040723] Kirkwood: MV88F6281-A0, TCLK=200000000.
Jan  1 11:00:19 alarm kernel: [   10.040736] Feroceon L2: Cache support initialised.
Jan  1 11:00:19 alarm kernel: [   10.046091] bio: create slab <bio-0> at 0
Jan  1 11:00:19 alarm kernel: [   10.046451] vgaarb: loaded
Jan  1 11:00:19 alarm kernel: [   10.046708] SCSI subsystem initialized
Jan  1 11:00:19 alarm kernel: [   10.047054] usbcore: registered new interface driver usbfs
Jan  1 11:00:19 alarm kernel: [   10.047152] usbcore: registered new interface driver hub
Jan  1 11:00:19 alarm kernel: [   10.047250] usbcore: registered new device driver usb
Jan  1 11:00:19 alarm kernel: [   10.047844] Switching to clocksource orion_clocksource
Jan  1 11:00:19 alarm kernel: [   10.057724] Switched to NOHz mode on CPU #0
Jan  1 11:00:19 alarm kernel: [   10.058481] FS-Cache: Loaded
Jan  1 11:00:19 alarm kernel: [   10.068128] NET: Registered protocol family 2
Jan  1 11:00:19 alarm kernel: [   10.068358] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069017] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069117] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069171] TCP: Hash tables configured (established 4096 bind 4096)
Jan  1 11:00:19 alarm kernel: [   10.069181] TCP reno registered
Jan  1 11:00:19 alarm kernel: [   10.069192] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069214] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.069439] NET: Registered protocol family 1
Jan  1 11:00:19 alarm kernel: [   10.069664] Trying to unpack rootfs image as initramfs...
Jan  1 11:00:19 alarm kernel: [   10.285475] Freeing initrd memory: 2576K
Jan  1 11:00:19 alarm kernel: [   10.285935] audit: initializing netlink socket (disabled)
Jan  1 11:00:19 alarm kernel: [   10.285976] type=2000 audit(0.330:1): initialized
Jan  1 11:00:19 alarm kernel: [   10.370180] VFS: Disk quotas dquot_6.5.2
Jan  1 11:00:19 alarm kernel: [   10.370438] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan  1 11:00:19 alarm kernel: [   10.372960] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Jan  1 11:00:19 alarm kernel: [   10.374336] aufs 3.1-20111107
Jan  1 11:00:19 alarm kernel: [   10.374357] msgmni has been set to 240
Jan  1 11:00:19 alarm kernel: [   10.375592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jan  1 11:00:19 alarm kernel: [   10.375607] io scheduler noop registered
Jan  1 11:00:19 alarm kernel: [   10.375615] io scheduler deadline registered
Jan  1 11:00:19 alarm kernel: [   10.375696] io scheduler cfq registered (default)
Jan  1 11:00:19 alarm kernel: [   10.375769] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
Jan  1 11:00:19 alarm kernel: [   10.375803] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
Jan  1 11:00:19 alarm kernel: [   10.407932] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
Jan  1 11:00:19 alarm kernel: [   10.447926] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
Jan  1 11:00:19 alarm kernel: [   10.487923] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
Jan  1 11:00:19 alarm kernel: [   10.527922] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
Jan  1 11:00:19 alarm kernel: [   10.532894] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jan  1 11:00:19 alarm kernel: [   10.553577] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
Jan  1 11:00:19 alarm kernel: [   10.553672] console [ttyS0] enabled
Jan  1 11:00:19 alarm kernel: [   10.559712] brd: module loaded
Jan  1 11:00:19 alarm kernel: [   10.562738] loop: module loaded
Jan  1 11:00:19 alarm kernel: [   10.563171] sata_mv sata_mv.0: slots 32 ports 2
Jan  1 11:00:19 alarm kernel: [   10.564866] scsi0 : sata_mv
Jan  1 11:00:19 alarm kernel: [   10.565254] scsi1 : sata_mv
Jan  1 11:00:19 alarm kernel: [   10.565471] ata1: SATA max UDMA/133 irq 21
Jan  1 11:00:19 alarm kernel: [   10.565482] ata2: SATA max UDMA/133 irq 21
Jan  1 11:00:19 alarm kernel: [   10.566189] ONFI flash detected
Jan  1 11:00:19 alarm kernel: [   10.566288] ONFI param page 0 valid
Jan  1 11:00:19 alarm kernel: [   10.566302] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08AAD)
Jan  1 11:00:19 alarm kernel: [   10.566324] Scanning device for bad blocks
Jan  1 11:00:19 alarm kernel: [   10.695003] Bad eraseblock 1716 at 0x00000d680000
Jan  1 11:00:19 alarm kernel: [   10.719792] 4 cmdlinepart partitions found on MTD device orion_nand
Jan  1 11:00:19 alarm kernel: [   10.719804] Creating 4 MTD partitions on "orion_nand":
Jan  1 11:00:19 alarm kernel: [   10.719819] 0x000000000000-0x000000100000 : "u-boot"
Jan  1 11:00:19 alarm kernel: [   10.720768] 0x000000100000-0x000000500000 : "uImage"
Jan  1 11:00:19 alarm kernel: [   10.721628] 0x000000500000-0x000002500000 : "pogoplug"
Jan  1 11:00:19 alarm kernel: [   10.722458] 0x000002500000-0x000010000000 : "root"
Jan  1 11:00:19 alarm kernel: [   10.724140] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
Jan  1 11:00:19 alarm kernel: [   10.724240] mv643xx_eth smi: probed
Jan  1 11:00:19 alarm kernel: [   10.726294] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 02:50:43:8b:77:87
Jan  1 11:00:19 alarm kernel: [   10.726408] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 11:00:19 alarm kernel: [   10.726463] orion-ehci orion-ehci.0: Marvell Orion EHCI
Jan  1 11:00:19 alarm kernel: [   10.726533] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Jan  1 11:00:19 alarm kernel: [   10.747899] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
Jan  1 11:00:19 alarm kernel: [   10.767882] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Jan  1 11:00:19 alarm kernel: [   10.768472] hub 1-0:1.0: USB hub found
Jan  1 11:00:19 alarm kernel: [   10.768496] hub 1-0:1.0: 1 port detected
Jan  1 11:00:19 alarm kernel: [   10.768995] Initializing USB Mass Storage driver...
Jan  1 11:00:19 alarm kernel: [   10.769104] usbcore: registered new interface driver usb-storage
Jan  1 11:00:19 alarm kernel: [   10.769114] USB Mass Storage support registered.
Jan  1 11:00:19 alarm kernel: [   10.769202] usbcore: registered new interface driver libusual
Jan  1 11:00:19 alarm kernel: [   10.769514] mousedev: PS/2 mouse device common for all mice
Jan  1 11:00:19 alarm kernel: [   10.927897] ata1: SATA link down (SStatus 0 SControl F300)
Jan  1 11:00:19 alarm kernel: [   11.087894] usb 1-1: new high speed USB device number 2 using orion-ehci
Jan  1 11:00:19 alarm kernel: [   11.239657] scsi2 : usb-storage 1-1:1.0
Jan  1 11:00:19 alarm kernel: [   11.277896] ata2: SATA link down (SStatus 0 SControl F300)
Jan  1 11:00:19 alarm kernel: [   11.782954] sdhci: Secure Digital Host Controller Interface driver
Jan  1 11:00:19 alarm kernel: [   11.782964] sdhci: Copyright(c) Pierre Ossman
Jan  1 11:00:19 alarm kernel: [   11.783032] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 11:00:19 alarm kernel: [   11.784344] usbcore: registered new interface driver r8712u
Jan  1 11:00:19 alarm kernel: [   11.785183] GRE over IPv4 demultiplexor driver
Jan  1 11:00:19 alarm kernel: [   11.785321] TCP cubic registered
Jan  1 11:00:19 alarm kernel: [   11.785334] NET: Registered protocol family 17
Jan  1 11:00:19 alarm kernel: [   11.785417] lib80211: common routines for IEEE802.11 drivers
Jan  1 11:00:19 alarm kernel: [   11.785437] Registering the dns_resolver key type
Jan  1 11:00:19 alarm kernel: [   11.786026] registered taskstats version 1
Jan  1 11:00:19 alarm kernel: [   11.786675] netconsole: local port 6665
Jan  1 11:00:19 alarm kernel: [   11.786687] netconsole: local IP 10.10.10.6
Jan  1 11:00:19 alarm kernel: [   11.786694] netconsole: interface 'eth0'
Jan  1 11:00:19 alarm kernel: [   11.786702] netconsole: remote port 6666
Jan  1 11:00:19 alarm kernel: [   11.786710] netconsole: remote IP 10.10.10.4
Jan  1 11:00:19 alarm kernel: [   11.786718] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
Jan  1 11:00:19 alarm kernel: [   11.786729] netconsole: device eth0 not up yet, forcing it
Jan  1 11:00:19 alarm kernel: [   12.239054] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.20 PQ: 0 ANSI: 5
Jan  1 11:00:19 alarm kernel: [   12.239780] sd 2:0:0:0: Attached scsi generic sg0 type 0
Jan  1 11:00:19 alarm kernel: [   12.240624] sd 2:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
Jan  1 11:00:19 alarm kernel: [   12.241986] sd 2:0:0:0: [sda] Write Protect is off
Jan  1 11:00:19 alarm kernel: [   12.242736] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan  1 11:00:19 alarm kernel: [   12.247813]  sda: sda1
Jan  1 11:00:19 alarm kernel: [   12.250478] sd 2:0:0:0: [sda] Attached SCSI removable disk
Jan  1 11:00:19 alarm kernel: [   15.807879] netconsole: timeout waiting for carrier
Jan  1 11:00:19 alarm kernel: [   15.808074] console [netcon0] enabled
Jan  1 11:00:19 alarm kernel: [   15.808082] netconsole: network logging started
Jan  1 11:00:19 alarm kernel: [   15.815223] Freeing init memory: 172K
Jan  1 11:00:19 alarm kernel: [   26.509800] kjournald starting.  Commit interval 5 seconds
Jan  1 11:00:19 alarm kernel: [   26.511498] EXT3-fs (sda1): using internal journal
Jan  1 11:00:19 alarm kernel: [   26.511510] EXT3-fs (sda1): recovery complete
Jan  1 11:00:19 alarm kernel: [   26.513116] EXT3-fs (sda1): mounted filesystem with writeback data mode
Jan  1 11:00:19 alarm [   27.944260] udevd[167]: starting version 180
Jan  1 11:00:19 alarm kernel: [   28.785906] EXT3-fs (sda1): using internal journal
Jan  1 11:00:19 alarm dhcpcd[354]: version 5.2.12 starting
Jan  1 11:00:20 alarm dhcpcd[354]: eth0: broadcasting for a lease
Jan  1 11:00:44 alarm kernel: [   55.000780] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan  1 11:00:49 alarm dhcpcd[354]: eth0: offered 192.168.1.5 from 192.168.1.251
Jan  1 11:00:49 alarm dhcpcd[354]: eth0: acknowledged 192.168.1.5 from 192.168.1.251
Jan  1 11:00:49 alarm dhcpcd[354]: eth0: checking for 192.168.1.5
Jan  1 11:00:50 alarm kernel: [   61.379078] NET: Registered protocol family 10
Jan  1 11:06:36 alarm kernel: [  407.589806] mv643xx_eth_port mv643xx_eth_port.0: eth0: link down
Jan  1 11:07:26 alarm kernel: [  456.838259] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, flow control disabled


Looks like it doesn't always get a DHCP lease for some reason - the last entry is where I unplugged the ethernet cable and put it into a different port on the router to try that, but it did seem to have given it an address before I did that.

Any help would be appreciated.

[Wesman26]

I'm having a very similar problem with my goflex net. I installed using my linux box, ssh, and a SATA drive I have plugged in. The problem seems to be similar to what happened here, where the mac address didn't take during installation. I know my mac address didn't take because on the dhcp client list for my router it shows a different mac address for a device with the hostname 'alarm.'

I can't ssh in, and the LEDs on the front of my router show the device trying to constantly connect and yet being disconnected before a full connection can be reached.

I'd try the solution found in the link I posted above, but ifconfig is a deprecated service at this point and I'm not sure how I would go about installing it, or the nc command. Please help.

[WarheadsSE]

nc = netcat, and you can do the same job of ifconfig with the ip command, just a bit different.

[Wesman26]

Okay so I have netcat and socat all set up, but I'm not sure what command to use with ip link such that I can mimic

Code: Select all

sudo ifconfig wlan0:0 10.10.10.5

I looked around the internet a bit, but didn't see anything particularly helpful. Ultimately I settled on trying

Code: Select all

sudo ip link add eth0:0 address 10.10.10.5 type vlan

, but I just get the error

Code: Select all

RTNETLINK address: Invalid argument

. I'm not quite sure what I should do; I'm clearly new to this, and not entirely sure how to use ifconfig or ip link beyond just connecting this box to the internet. Any and all help is greatly appreciated.

Edit
Okay so I've moved on and started using

Code: Select all

sudo ip route add 10.10.10.5 via 192.168.2.2

and that works I supposed since I don't get any errors, but I suspect it's not doing what I want it to since

Code: Select all

nc -lu 10.10.10.5 6666

returns nothing, and the console looks like it's waiting for it to do something because I can't type anything in.

I'm also not quite certain what the ip command is really going to do; when I ping 192.168.2.2 (where the goflex net is supposedly trying to connect according to my router) I get 100% packet loss, which means it isn't connecting properly with the router; I guess my point is I don't see how to get it to connect, unless it's something I'm just missing.

[Wesman26]

So is there anyone who can help me? I've been looking around for the past several days and I still have a bricked device and I have no idea what to do to fix it. I'd really appreciate some help here, I don't want to accept that I just blew 80 bucks on something that I've already broke in an unfixable manner.

[Wesman26]

Alright, so I think I might have figured it out, but I still can't access the device in anyway.

I'm using

Code: Select all

 sudo ip addr add 10.10.10.5 label wlan0:0 dev wlan0

followed by

Code: Select all

 nc -lu 10.10.10.5 6666

I think that's the right ip command, but I could be wrong. At any rate, nc returns nothing, the program just sits and does nothing as far as I can tell.

If I take the drive out of the Sata port, I get a green flashing light on the front of the go flex, and a solid green light on my router, but I can't ssh into it or do anything else it would seem. Leaving the sata drive in gets me a solid green light on the go flex and the router blinks haphazardly as the goflex tries and fails to connect. I really don't know what to do to fix this. This post looked like it would help, but I don't see what exactly to do...

Similarly, nothing happens for 10.10.10.2 or 10.10.10.4 when they are setup appropriately.