I am using the iMX53-QSB board from Freescale, which is similar to the LOCO or START board, but does not have NAND flash memory.
I have successfully built the u-boot/tools/env tools, but do not know what to fill into the fw_env.config file.
I do not have the /dev/mtd0 or /dev/mtd1 or /dev/mtd2 devices on my filesystem (which is based on the standard filesystem which came with the package) and am assuming that is because there is no NAND memory.
However my u-boot is working, booting from SD-card and saving its environment, I am assuming on the SD-card itself.
Anybody knowing the settings or how to get them?
Thank you in advance.