#===============================================================================
#                       vanilla DTS
#===============================================================================

\wait for usb get descriptor cmd timeout
rk3288_maskrom_ctrl: enable_emmc = 0
usb_current_limit_ctrl: unlock_current = 0
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
842 bytes read in 1 ms (822.3 KiB/s)
## Executing script at 00000000
6798328 bytes read in 159 ms (40.8 MiB/s)
53425 bytes read in 10 ms (5.1 MiB/s)
6554186 bytes read in 153 ms (40.9 MiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to 0f9bf000, end 0ffff24a ... OK
   Loading Device Tree to 0f9ae000, end 0f9be0b0 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Linux version 5.2.8-2-ARCH (builduser@leming) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Tue Aug 13 00:14:58 UTC 2019
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Rockchip RK3288 Asus Tinker Board S
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 64 MiB at 0x2c000000
[    0.000000] percpu: Embedded 17 pages/cpu s38092 r8192 d23348 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522560
[    0.000000] Kernel command line: console=ttyS2,115200n8 root=LABEL=TB-MM-root rw rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1981916K/2097152K available (13312K kernel code, 1067K rwdata, 5536K rodata, 2048K init, 883K bss, 49700K reserved, 65536K cma-reserved, 1310720K highmem)
[    0.000000] random: get_random_u32 called from __kmem_cache_create+0x28/0x3a0 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000023] Switching to timer-based delay loop, resolution 41ns
[    0.004969] Console: colour dummy device 80x30
[    0.005023] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.005042] pid_max: default: 32768 minimum: 301
[    0.005286] LSM: Security Framework initializing
[    0.005445] Smack:  Initializing.
[    0.005455] Smack:  IPv6 port labeling enabled.
[    0.005644] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.005664] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006425] *** VALIDATE proc ***
[    0.006736] *** VALIDATE cgroup1 ***
[    0.006752] *** VALIDATE cgroup2 ***
[    0.006819] CPU: Testing write buffer coherency: ok
[    0.006854] CPU0: Spectre v2: using BPIALL workaround
[    0.007196] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.029094] Setting up static identity map for 0x300000 - 0x3000ac
[    0.037095] rcu: Hierarchical SRCU implementation.
[    0.057208] smp: Bringing up secondary CPUs ...
[    0.090627] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.090636] CPU1: Spectre v2: using BPIALL workaround
[    0.122791] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.122799] CPU2: Spectre v2: using BPIALL workaround
[    0.154955] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.154963] CPU3: Spectre v2: using BPIALL workaround
[    0.155146] smp: Brought up 1 node, 4 CPUs
[    0.155162] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.155173] CPU: All CPU(s) started in SVC mode.
[    0.156815] devtmpfs: initialized
[    0.168827] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.169315] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.169339] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.171492] xor: measuring software checksum speed
[    0.209944]    arm4regs  :  1050.000 MB/sec
[    0.250012]    8regs     :   809.000 MB/sec
[    0.290105]    32regs    :   787.000 MB/sec
[    0.330201]    neon      :  1444.000 MB/sec
[    0.330212] xor: using function: neon (1444.000 MB/sec)
[    0.330282] pinctrl core: initialized pinctrl subsystem
[    0.332392] NET: Registered protocol family 16
[    0.335389] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.336419] audit: initializing netlink subsys (disabled)
[    0.338272] cpuidle: using governor menu
[    0.338990] No ATAGs?
[    0.339039] audit: type=2000 audit(0.332:1): state=initialized audit_enabled=0 res=1
[    0.339173] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.339187] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.340640] Serial: AMBA PL011 UART driver
[    0.483002] raid6: neonx8   gen()   625 MB/s
[    0.551164] raid6: neonx8   xor()   626 MB/s
[    0.619387] raid6: neonx4   gen()   670 MB/s
[    0.687605] raid6: neonx4   xor()   696 MB/s
[    0.755935] raid6: neonx2   gen()   418 MB/s
[    0.824070] raid6: neonx2   xor()   600 MB/s
[    0.892348] raid6: neonx1   gen()   337 MB/s
[    0.960495] raid6: neonx1   xor()   463 MB/s
[    1.028639] raid6: int32x8  gen()   191 MB/s
[    1.096938] raid6: int32x8  xor()   139 MB/s
[    1.164966] raid6: int32x4  gen()   160 MB/s
[    1.233011] raid6: int32x4  xor()   142 MB/s
[    1.301309] raid6: int32x2  gen()   116 MB/s
[    1.369465] raid6: int32x2  xor()   133 MB/s
[    1.437827] raid6: int32x1  gen()    96 MB/s
[    1.505743] raid6: int32x1  xor()   107 MB/s
[    1.505753] raid6: using algorithm neonx4 gen() 670 MB/s
[    1.505763] raid6: .... xor() 696 MB/s, rmw enabled
[    1.505774] raid6: using neon recovery algorithm
[    1.510158] sdmmc-regulator GPIO handle specifies active low - ignored
[    1.517255] vgaarb: loaded
[    1.518098] SCSI subsystem initialized
[    1.518602] usbcore: registered new interface driver usbfs
[    1.518665] usbcore: registered new interface driver hub
[    1.518789] usbcore: registered new device driver usb
[    1.520563] media: Linux media interface: v0.10
[    1.520621] videodev: Linux video capture interface: v2.00
[    1.520738] pps_core: LinuxPPS API ver. 1 registered
[    1.520749] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.520776] PTP clock support registered
[    1.520815] EDAC MC: Ver: 3.0.0
[    1.522145] Advanced Linux Sound Architecture Driver Initialized.
[    1.522714] NetLabel: Initializing
[    1.522726] NetLabel:  domain hash size = 128
[    1.522735] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.522814] NetLabel:  unlabeled traffic allowed by default
[    1.523199] clocksource: Switched to clocksource arch_sys_counter
[    1.523508] VFS: Disk quotas dquot_6.6.0
[    1.523602] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.537790] NET: Registered protocol family 2
[    1.538663] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    1.538711] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.538795] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.538988] TCP: Hash tables configured (established 8192 bind 8192)
[    1.539114] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.539168] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.539502] NET: Registered protocol family 1
[    1.540175] RPC: Registered named UNIX socket transport module.
[    1.540189] RPC: Registered udp transport module.
[    1.540200] RPC: Registered tcp transport module.
[    1.540210] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.540226] PCI: CLS 0 bytes, default 64
[    1.540720] Trying to unpack rootfs image as initramfs...
[    2.095981] Freeing initrd memory: 6404K
[    2.096821] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
[    2.118675] Initialise system trusted keyrings
[    2.118893] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    2.124492] zbud: loaded
[    2.126722] NFS: Registering the id_resolver key type
[    2.126758] Key type id_resolver registered
[    2.126769] Key type id_legacy registered
[    2.126793] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.138817] Key type asymmetric registered
[    2.138834] Asymmetric key parser 'x509' registered
[    2.138906] bounce: pool size: 64 pages
[    2.138966] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    2.139225] io scheduler mq-deadline registered
[    2.139240] io scheduler kyber registered
[    2.139509] io scheduler bfq registered
[    2.168215] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.168238] dma-pl330 ff250000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    2.169120] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.169141] dma-pl330 ffb20000.dma-controller:       DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    2.177509] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
[    2.181083] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[    2.182125] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 36, base_baud = 1500000) is a 16550A
[    2.183266] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 37, base_baud = 1500000) is a 16550A
[    3.163549] printk: console [ttyS2] enabled
[    3.169298] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 38, base_baud = 1500000) is a 16550A
[    3.180306] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 39, base_baud = 1500000) is a 16550A
[    3.192039] Serial: AMBA driver
[    3.215362] loop: module loaded
[    3.220537] Loading iSCSI transport class v2.0-870.
[    3.226452] iscsi: registered transport (tcp)
[    3.238791] libphy: Fixed MDIO Bus: probed
[    3.248426] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator
[    3.257799] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator
[    3.327656] dwc2 ff540000.usb: DWC OTG Controller
[    3.332982] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
[    3.340935] dwc2 ff540000.usb: irq 44, io mem 0xff540000
[    3.347169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    3.356445] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.364546] usb usb1: Product: DWC OTG Controller
[    3.369827] usb usb1: Manufacturer: Linux 5.2.8-2-ARCH dwc2_hsotg
[    3.376663] usb usb1: SerialNumber: ff540000.usb
[    3.382568] hub 1-0:1.0: USB hub found
[    3.386844] hub 1-0:1.0: 1 port detected
[    3.392015] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
[    3.401380] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
[    3.410959] dwc2 ff580000.usb: dwc2_core_reset: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST
[    3.421016] dwc2: probe of ff580000.usb failed with error -16
[    3.428318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.435683] ehci-pci: EHCI PCI platform driver
[    3.440740] ehci-platform: EHCI generic platform driver
[    3.446882] ehci-platform ff500000.usb: EHCI Host Controller
[    3.453269] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 2
[    3.462379] ehci-platform ff500000.usb: irq 43, io mem 0xff500000
[    3.483246] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
[    3.490436] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    3.499832] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.507940] usb usb2: Product: EHCI Host Controller
[    3.513418] usb usb2: Manufacturer: Linux 5.2.8-2-ARCH ehci_hcd
[    3.520061] usb usb2: SerialNumber: ff500000.usb
[    3.525895] hub 2-0:1.0: USB hub found
[    3.530170] hub 2-0:1.0: 1 port detected
[    3.535282] ehci-mxc: Freescale On-Chip EHCI Host driver
[    3.541380] ehci-omap: OMAP-EHCI Host Controller driver
[    3.547450] ehci-orion: EHCI orion driver
[    3.552181] ehci-exynos: EHCI EXYNOS driver
[    3.557087] tegra-ehci: Tegra EHCI driver
[    3.561819] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.568773] ohci-pci: OHCI PCI platform driver
[    3.573822] ohci-platform: OHCI generic platform driver
[    3.579949] ohci-exynos: OHCI EXYNOS driver
[    3.585495] usbcore: registered new interface driver uas
[    3.591562] usbcore: registered new interface driver usb-storage
[    3.598352] usbcore: registered new interface driver ums-cypress
[    3.605264] usbcore: registered new interface driver ums_eneub6250
[    3.612263] usbcore: registered new interface driver ums-freecom
[    3.619053] usbcore: registered new interface driver ums-isd200
[    3.625742] usbcore: registered new interface driver ums-usbat
[    3.641362] i2c /dev entries driver
[    3.649005] rk808 0-001b: chip id: 0x0
[    3.657292] DCDC_REG1: supplied by vcc_sys
[    3.662873] DCDC_REG2: supplied by vcc_sys
[    3.668380] DCDC_REG3: supplied by vcc_sys
[    3.673331] DCDC_REG4: supplied by vcc_sys
[    3.678607] LDO_REG1: supplied by vcc_sys
[    3.684654] LDO_REG2: supplied by vcc_sys
[    3.690212] LDO_REG3: supplied by vcc_sys
[    3.695955] LDO_REG4: supplied by vcc_io
[    3.701571] LDO_REG5: supplied by vcc_io
[    3.707358] LDO_REG6: supplied by vcc_io
[    3.713002] LDO_REG7: supplied by vcc_sys
[    3.718749] LDO_REG8: supplied by vcc_sys
[    3.724499] SWITCH_REG1: supplied by vcc_io
[    3.729561] SWITCH_REG2: supplied by vcc_io
[    3.738145] rk808-rtc rk808-rtc: registered as rtc0
[    3.758234] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 500000 KHz
[    3.766903] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz
[    3.777550] sdhci: Secure Digital Host Controller Interface driver
[    3.784471] sdhci: Copyright(c) Pierre Ossman
[    3.789791] Synopsys Designware Multimedia Card Interface Driver
[    3.796516] usb 1-1: new high-speed USB device number 2 using dwc2
[    3.803851] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.811971] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
[    3.819555] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
[    3.826003] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
[    3.837023] mmc_host mmc0: card is polling.
[    3.854327] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.871191] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    3.877499] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.887140] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
[    3.894735] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
[    3.901179] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[    3.912181] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
[    3.913778] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    3.918801] mmc_host mmc1: card is non-removable.
[    3.945407] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.958861] random: fast init done
[    3.968580] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.976492] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    3.976755] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
[    3.994553] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
[    4.001001] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[    4.011972] mmc_host mmc2: card is non-removable.
[    4.017578] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[    4.026723] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.027088] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    4.029901] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.034700] usb 1-1: Product: USB2.0 Hub
[    4.035130] hub 1-1:1.0: USB hub found
[    4.042488] mmc_host mmc0: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1)
[    4.042718] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    4.046212] mmc1: new high speed SDIO card at address 0001
[    4.046931] usbcore: registered new interface driver vub300
[    4.046949] usbcore: registered new interface driver ushc
[    4.047340] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.056215] hub 1-1:1.0: 4 ports detected
[    4.060300] ledtrig-cpu: registered to indicate activity on CPUs
[    4.118009] hidraw: raw HID events driver (C) Jiri Kosina
[    4.124168] usbcore: registered new interface driver usbhid
[    4.130390] usbhid: USB HID core driver
[    4.137160] NET: Registered protocol family 10
[    4.159115] Segment Routing with IPv6
[    4.163287] mip6: Mobile IPv6
[    4.166598] NET: Registered protocol family 17
[    4.175726] Key type dns_resolver registered
[    4.180578] ThumbEE CPU extension supported.
[    4.185368] Registering SWP/SWPB emulation handler
[    4.191054] registered taskstats version 1
[    4.195673] Loading compiled-in X.509 certificates
[    4.201075] zswap: loaded using pool lzo/zbud
[    4.202113] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    4.217924] Btrfs loaded, crc32c=crc32c-generic
[    4.233113] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.240761] usb 2-1: config 1 has an invalid interface number: 255 but max is 6
[    4.248932] rk808-rtc rk808-rtc: setting system clock to 2019-08-17T03:43:12 UTC (1566013392)
[    4.248946] usb 2-1: config 1 has no interface number 6
[    4.258961] vcc_sd: supplied by vcc_io
[    4.265490] usb 2-1: New USB device found, idVendor=0bda, idProduct=481a, bcdDevice= 0.00
[    4.268548] vcc_sd: disabling
[    4.277630] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.277634] usb 2-1: Product: USB Audio
[    4.280948] ALSA device list:
[    4.288924] usb 2-1: Manufacturer: Generic
[    4.293201]   No soundcards found.
[    4.296517] usb 2-1: SerialNumber: 201405280001
[    4.310039] ttyS2 - failed to request DMA
[    4.314857] input: Generic USB Audio Consumer Control as /devices/platform/ff500000.usb/usb2/2-1/2-1:1.255/0003:0BDA:481A.0001/input/input1
[    4.315489] Freeing unused kernel memory: 2048K
[    4.334034] Run /init as init process
:: running early hook [udev]
Starting version 242.84-1-arch[    4.387365] input: Generic USB Audio as /devices/platform/ff500000.usb/usb2/2-1/2-1:1.255/0003:0BDA:481A.0001/input/input2

:: running hook [udev]
:: Triggering uevents...
[    4.401872] hid-generic 0003:0BDA:481A.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-ff500000.usb-1/input255
[    4.604034] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 207
[    4.613235] mmc2: new HS200 MMC card at address 0001
[    4.620074] mmcblk2: mmc2:0001 HAG4a2 14.7 GiB
[    4.625838] mmcblk2boot0: mmc2:0001 HAG4a2 partition 1 4.00 MiB
[    4.633157] mmcblk2boot1: mmc2:0001 HAG4a2 partition 2 4.00 MiB
[    4.640156] mmcblk2rpmb: mmc2:0001 HAG4a2 partition 3 4.00 MiB, chardev (241:0)
[    4.649532]  mmcblk2: p1 p2
:: performing fsck on '/dev/mmcblk2p1'
TB-MM-root: clean, 109482/335872 files, 956088/1311488 blocks
:: mounting '/dev/mmcblk2p1' on real root
[    4.834139] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null)
:: running cleanup hook [udev]
[    5.076856] systemd[1]: systemd 242.84-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.104413] systemd[1]: Detected architecture arm.

Welcome to Arch Linux ARM!

[    5.131469] systemd[1]: Set hostname to <alarm>.
[    5.365284] random: systemd: uninitialized urandom read (16 bytes read)
[    5.374640] systemd[1]: Created slice system-netctl.slice.
[  OK  ] Created slice system-netctl.slice.
[    5.391306] random: systemd: uninitialized urandom read (16 bytes read)
[    5.398720] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    5.415257] random: systemd: uninitialized urandom read (16 bytes read)
[    5.425553] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    5.443402] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[    5.474050] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[    5.491523] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    5.511458] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Listening on Process Core Dump Socket.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on Journal Socket.
         Starting Load Kernel Modules...
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
         Starting udev Coldplug all Devices...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Created slice system-getty.slice.
[    5.716274] EXT4-fs (mmcblk2p1): re-mounted. Opts: data=ordered
         Mounting Kernel Debug File System...
[  OK  ] Reached target Slices.
[  OK  ] Reached target Swap.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Reached target Paths.
         Mounting POSIX Message Queue File System...
[  OK  ] Created slice system-systemd\x2dfsck.slice.
         Starting Journal Service...
[  OK  ] Listening on Device-mapper event daemon FIFOs.
         Starting Create list of re…odes for the current kernel...
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Create list of req… nodes for the current kernel.
[    5.943363] audit: type=1130 audit(1566013394.200:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting Load/Save Random Seed...
         Starting Create Static Device Nodes in /dev...
         Starting Apply Kernel Variables...
         Mounting Kernel Configuration File System...
[  OK  ] Started Journal Service.
[    6.031433] audit: type=1130 audit(1566013394.288:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started udev Coldplug all Devices.
[    6.067295] audit: type=1130 audit(1566013394.324:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Load/Save Random Seed.
[    6.099288] audit: type=1130 audit(1566013394.356:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  [    6.132865] audit: type=1130 audit(1566013394.388:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
] Started Apply Kernel Variables.
[  OK  [    6.168046] audit: type=1130 audit(1566013394.424:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
] Mounted Kernel Configuration File System.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
         Starting udev Kernel Device Manager...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Mounted /tmp.
[    6.293798] systemd-journald[241]: Received request to flush runtime journal from PID 1
[  OK  ] Started udev Kernel Device Manager.
[    6.399779] audit: type=1130 audit(1566013394.656:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting Network Service...
[  OK  ] Started Flush Journal to Persistent Storage.
[    6.451425] audit: type=1130 audit(1566013394.708:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Network Service.
[    6.551372] audit: type=1130 audit(1566013394.808:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.659070] rockchip-vop ff930000.vop: Adding to iommu group 0
[    6.668279] rockchip-vop ff940000.vop: Adding to iommu group 1
[    6.691715] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm])
[    6.704801] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm])
[    6.716105] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY)
[    6.721948] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock
[    6.729003] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[    6.740188] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.743997] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.752933] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input).
[    6.760233] [drm] No driver support for vblank timestamp query.
[    6.770251] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
[    6.774707] [drm] Cannot find any crtc or sizes
[    6.780973] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
[    6.792510] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no).
[    6.796428] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[[    6.799611] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed
  OK  [    6.816281] rk_gmac-dwmac ff290000.ethernet: clock input from PHY
] Found device /dev/ttyS2.
[    6.829783] rk_gmac-dwmac ff290000.ethernet: init for RGMII
[    6.832950] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.839104] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    6.851468] rk_gmac-dwmac ff290000.ethernet:         DWMAC1000
[    6.857434] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported
[    6.865868] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported
[    6.874310] rk_gmac-dwmac ff290000.ethernet: COE Type 2
[    6.880208] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported
[    6.888150] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported
[    6.895442] rk_gmac-dwmac ff290000.ethernet: Normal descriptors
[    6.902098] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled
[    6.908679] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    6.919089] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.930104] cfg80211: failed to load regulatory.db
[    6.945369] panfrost ffa30000.gpu: clock rate = 400000000
[    6.950851] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[    6.954707] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1
[    6.971476] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400
[    6.971969] RTL8723BS: module init start
[    6.980686] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[    6.986668] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[    6.994069] rk3288-crypto ff8a0000.cypto-controller: Crypto Accelerator successfully registered
[    7.000151] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1
[    7.006394] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[    7.017197] [drm] Initialized panfrost 1.0.0 20180908 for ffa30000.gpu on minor 1
[    7.039047] pnetdev = (ptrval)
[    7.077987] rockchip_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[    7.090418] rockchip-vpu ff9a0000.video-codec: Adding to iommu group 2
[  OK  ] [    7.098336] rockchip-vpu ff9a0000.video-codec: registered as /dev/video0
Found device /dev/disk/by-label/TB-MM-home.
[    7.111012] rockchip-rga ff920000.rga: HW Version: 0x00.00
         Starting File System Check…ev/disk/by-label/TB-MM-home...
[    7.135642] rockchip-rga ff920000.rga: Registered rockchip-rga as /dev/video1
[    7.155341] RTL8723BS: rtw_ndev_init(wlan0)
[    7.163674] RTL8723BS: module init ret =0
[  OK  ] Started File System Check …/dev/disk/by-label/TB-MM-home.
[    7.215405] audit: type=1130 audit(1566013395.472:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-fsck@dev-disk-by\x2dlabel-TB\x2dMM\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Mounting /home...[    7.242701] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: data=ordered

[  OK  ] Mounted /home.
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Network Time Synchronization...
         Starting Entropy Harvesting Daemon...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Entropy Harvesting Daemon.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started D-Bus System Message Bus.
         Starting Login Service...
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Daily man-db regeneration.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily verification of password and group files.
[  OK  ] Reached target Timers.
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started Login Service.
[    7.811309] [drm] Cannot find any crtc or sizes
[  OK  ] Found device /sys/subsystem/net/devices/wlan0.
         Starting A simple WPA encrypted wireless connection...
[    7.934514] asoc-simple-card sound: i2s-hifi <-> ff890000.i2s mapping ok
[  OK  ] Reached target Sound Card.
[    8.024022] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[    8.058582] random: crng init done
[    8.062385] random: 7 urandom warning(s) missed due to ratelimiting
[    8.082967] libphy: stmmac: probed
[    8.087348] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    8.107130] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    9.113199] usbcore: registered new interface driver snd-usb-audio
[    9.378702] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    9.403233] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found
[    9.411719] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW
[   10.834197] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   10.945914] RTL8723BS: start auth
[   10.959611] RTL8723BS: auth success, start assoc
[   10.969497] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[   10.977371] RTL8723BS: assoc success
[   10.982470] RTL8723BS: send eapol packet
[   10.993407] RTL8723BS: send eapol packet
[   10.998047] RTL8723BS: set pairwise key camid:4, addr:00:ad:24:59:41:0c, kid:0, type:AES
[   10.998204] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   11.014933] RTL8723BS: set group key camid:5, addr:00:ad:24:59:41:0c, kid:1, type:TKIP
[  OK  ] Started A simple WPA encrypted wireless connection.
[   11.161085] 8021q: 802.1Q VLAN Support v1.8
[  OK  [   11.167144] kauditd_printk_skb: 8 callbacks suppressed
] Reached target Network.
[   11.167150] audit: type=1130 audit(1566013399.424:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=netctl@wlrouter comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting Permit User Sessions...
[  OK  ] Started OpenSSH Daemon.
[   11.236339] audit: type=1130 audit(1566013399.492:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Home assistant.
[   11.268332] audit: type=1130 audit(1566013399.524:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=home-assistant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started vsftpd daemon.
[   11.304257] audit: type=1130 audit(1566013399.560:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=vsftpd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Permit User Sessions.
[   11.336239] audit: type=1130 audit(1566013399.592:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Getty on tty1.
[   11.372549] audit: type=1130 audit(1566013399.628:25): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Serial Getty on ttyS2.
[   11.408468] audit: type=1130 audit(1566013399.664:26): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=serial-getty@ttyS2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Reached target Login Prompts.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.

Arch Linux 5.2.8-2-ARCH (ttyS2)

alarm login: [   12.732157] audit: type=1131 audit(1566013400.988:27): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'


#===============================================================================
#                       Summers's DTS
#===============================================================================
U-Boot SPL 2018.09-armbian (Nov 29 2018 - 12:02:48 +0100)
Returning to boot ROM...


U-Boot 2018.09-armbian (Nov 29 2018 - 12:02:48 +0100)

Model: Tinker-RK3288
DRAM:  2 GiB
PC event = 0x20
usb connected to SDP, force enter ums mode
rk3288_maskrom_ctrl: enable_emmc = 1
usb_current_limit_ctrl: unlock_current = 1
MMC:   dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
Loading Environment from EXT4... ** File not found /boot/boot.env **

** Unable to read "/boot/boot.env" from mmc0:1 **
In:    serial
Out:   serial
Err:   serial
Model: Tinker-RK3288
Net:   eth0: ethernet@ff290000
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1d5a000
\wait for usb get descriptor cmd timeout
rk3288_maskrom_ctrl: enable_emmc = 0
usb_current_limit_ctrl: unlock_current = 0
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
841 bytes read in 0 ms
## Executing script at 00000000
6798328 bytes read in 159 ms (40.8 MiB/s)
39990 bytes read in 3 ms (12.7 MiB/s)
6554186 bytes read in 154 ms (40.6 MiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to 0f9bf000, end 0ffff24a ... OK
   Loading Device Tree to 0f9b2000, end 0f9bec35 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Linux version 5.2.8-2-ARCH (builduser@leming) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Tue Aug 13 00:14:58 UTC 2019
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Rockchip RK3288 Asus Tinker Board S
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 64 MiB at 0x2c000000
[    0.000000] percpu: Embedded 17 pages/cpu s38092 r8192 d23348 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522560
[    0.000000] Kernel command line: console=ttyS2,115200n8 root=LABEL=TB-MM-root rw rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1981948K/2097152K available (13312K kernel code, 1067K rwdata, 5536K rodata, 2048K init, 883K bss, 49668K reserved, 65536K cma-reserved, 1310720K highmem)
[    0.000000] random: get_random_u32 called from __kmem_cache_create+0x28/0x3a0 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000023] Switching to timer-based delay loop, resolution 41ns
[    0.004617] Console: colour dummy device 80x30
[    0.004671] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.004690] pid_max: default: 32768 minimum: 301
[    0.004936] LSM: Security Framework initializing
[    0.005100] Smack:  Initializing.
[    0.005110] Smack:  IPv6 port labeling enabled.
[    0.005299] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.005319] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006079] *** VALIDATE proc ***
[    0.006393] *** VALIDATE cgroup1 ***
[    0.006410] *** VALIDATE cgroup2 ***
[    0.006478] CPU: Testing write buffer coherency: ok
[    0.006513] CPU0: Spectre v2: using BPIALL workaround
[    0.006852] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.028748] Setting up static identity map for 0x300000 - 0x3000ac
[    0.036751] rcu: Hierarchical SRCU implementation.
[    0.056865] smp: Bringing up secondary CPUs ...
[    0.090281] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.090290] CPU1: Spectre v2: using BPIALL workaround
[    0.122446] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.122455] CPU2: Spectre v2: using BPIALL workaround
[    0.154615] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.154623] CPU3: Spectre v2: using BPIALL workaround
[    0.154807] smp: Brought up 1 node, 4 CPUs
[    0.154823] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.154833] CPU: All CPU(s) started in SVC mode.
[    0.156470] devtmpfs: initialized
[    0.166947] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.167426] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.167452] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.169562] xor: measuring software checksum speed
[    0.209616]    arm4regs  :  1050.000 MB/sec
[    0.249699]    8regs     :   809.000 MB/sec
[    0.289793]    32regs    :   787.000 MB/sec
[    0.329891]    neon      :  1396.000 MB/sec
[    0.329902] xor: using function: neon (1396.000 MB/sec)
[    0.329962] pinctrl core: initialized pinctrl subsystem
[    0.332031] NET: Registered protocol family 16
[    0.335037] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.336038] audit: initializing netlink subsys (disabled)
[    0.337831] cpuidle: using governor menu
[    0.338613] No ATAGs?
[    0.338691] audit: type=2000 audit(0.332:1): state=initialized audit_enabled=0 res=1
[    0.338800] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.338813] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.340225] Serial: AMBA PL011 UART driver
[    0.482645] raid6: neonx8   gen()   632 MB/s
[    0.550878] raid6: neonx8   xor()   624 MB/s
[    0.619219] raid6: neonx4   gen()   668 MB/s
[    0.687236] raid6: neonx4   xor()   709 MB/s
[    0.755459] raid6: neonx2   gen()   419 MB/s
[    0.823534] raid6: neonx2   xor()   614 MB/s
[    0.891816] raid6: neonx1   gen()   338 MB/s
[    0.959817] raid6: neonx1   xor()   459 MB/s
[    1.028120] raid6: int32x8  gen()   191 MB/s
[    1.096218] raid6: int32x8  xor()   140 MB/s
[    1.164307] raid6: int32x4  gen()   159 MB/s
[    1.232524] raid6: int32x4  xor()   143 MB/s
[    1.300952] raid6: int32x2  gen()   117 MB/s
[    1.368684] raid6: int32x2  xor()   133 MB/s
[    1.437080] raid6: int32x1  gen()    96 MB/s
[    1.505036] raid6: int32x1  xor()   105 MB/s
[    1.505047] raid6: using algorithm neonx4 gen() 668 MB/s
[    1.505056] raid6: .... xor() 709 MB/s, rmw enabled
[    1.505066] raid6: using neon recovery algorithm
[    1.509400] sdmmc-regulator GPIO handle specifies active low - ignored
[    1.515978] vgaarb: loaded
[    1.516783] SCSI subsystem initialized
[    1.517300] usbcore: registered new interface driver usbfs
[    1.517364] usbcore: registered new interface driver hub
[    1.517488] usbcore: registered new device driver usb
[    1.519229] media: Linux media interface: v0.10
[    1.519275] videodev: Linux video capture interface: v2.00
[    1.519408] pps_core: LinuxPPS API ver. 1 registered
[    1.519420] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.519446] PTP clock support registered
[    1.519486] EDAC MC: Ver: 3.0.0
[    1.520746] Advanced Linux Sound Architecture Driver Initialized.
[    1.521333] NetLabel: Initializing
[    1.521347] NetLabel:  domain hash size = 128
[    1.521356] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.521437] NetLabel:  unlabeled traffic allowed by default
[    1.521869] clocksource: Switched to clocksource arch_sys_counter
[    1.522156] VFS: Disk quotas dquot_6.6.0
[    1.522253] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.536271] NET: Registered protocol family 2
[    1.537147] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    1.537195] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.537279] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.537470] TCP: Hash tables configured (established 8192 bind 8192)
[    1.537605] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.537659] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.537993] NET: Registered protocol family 1
[    1.542632] RPC: Registered named UNIX socket transport module.
[    1.542646] RPC: Registered udp transport module.
[    1.542657] RPC: Registered tcp transport module.
[    1.542666] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.542683] PCI: CLS 0 bytes, default 64
[    1.543171] Trying to unpack rootfs image as initramfs...
[    2.096541] Freeing initrd memory: 6404K
[    2.097422] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
[    2.119721] Initialise system trusted keyrings
[    2.119936] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    2.125493] zbud: loaded
[    2.127810] NFS: Registering the id_resolver key type
[    2.127842] Key type id_resolver registered
[    2.127854] Key type id_legacy registered
[    2.127877] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.139605] Key type asymmetric registered
[    2.139622] Asymmetric key parser 'x509' registered
[    2.139694] bounce: pool size: 64 pages
[    2.139748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    2.139960] io scheduler mq-deadline registered
[    2.139973] io scheduler kyber registered
[    2.140235] io scheduler bfq registered
[    2.168374] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.168394] dma-pl330 ff250000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    2.169286] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.169306] dma-pl330 ffb20000.dma-controller:       DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    2.177485] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
[    2.181102] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[    2.182199] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 36, base_baud = 1500000) is a 16550A
[    2.183315] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 37, base_baud = 1500000) is a 16550A
[    3.163507] printk: console [ttyS2] enabled
[    3.169270] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 38, base_baud = 1500000) is a 16550A
[    3.180275] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 39, base_baud = 1500000) is a 16550A
[    3.191941] Serial: AMBA driver
[    3.215051] loop: module loaded
[    3.220207] Loading iSCSI transport class v2.0-870.
[    3.226152] iscsi: registered transport (tcp)
[    3.238411] libphy: Fixed MDIO Bus: probed
[    3.247969] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator
[    3.257340] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator
[    3.326266] dwc2 ff540000.usb: DWC OTG Controller
[    3.331590] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
[    3.339535] dwc2 ff540000.usb: irq 44, io mem 0xff540000
[    3.345763] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    3.355039] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.363140] usb usb1: Product: DWC OTG Controller
[    3.368422] usb usb1: Manufacturer: Linux 5.2.8-2-ARCH dwc2_hsotg
[    3.375257] usb usb1: SerialNumber: ff540000.usb
[    3.381149] hub 1-0:1.0: USB hub found
[    3.385425] hub 1-0:1.0: 1 port detected
[    3.390620] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
[    3.400003] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
[    3.409604] dwc2 ff580000.usb: dwc2_core_reset: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST
[    3.419670] dwc2: probe of ff580000.usb failed with error -16
[    3.426941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.434304] ehci-pci: EHCI PCI platform driver
[    3.439363] ehci-platform: EHCI generic platform driver
[    3.445507] ehci-platform ff500000.usb: EHCI Host Controller
[    3.451892] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 2
[    3.460919] ehci-platform ff500000.usb: irq 43, io mem 0xff500000
[    3.481917] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
[    3.489084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    3.498476] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.506585] usb usb2: Product: EHCI Host Controller
[    3.512061] usb usb2: Manufacturer: Linux 5.2.8-2-ARCH ehci_hcd
[    3.518703] usb usb2: SerialNumber: ff500000.usb
[    3.524529] hub 2-0:1.0: USB hub found
[    3.528802] hub 2-0:1.0: 1 port detected
[    3.533918] ehci-mxc: Freescale On-Chip EHCI Host driver
[    3.540015] ehci-omap: OMAP-EHCI Host Controller driver
[    3.546081] ehci-orion: EHCI orion driver
[    3.550807] ehci-exynos: EHCI EXYNOS driver
[    3.555715] tegra-ehci: Tegra EHCI driver
[    3.560441] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.567395] ohci-pci: OHCI PCI platform driver
[    3.572445] ohci-platform: OHCI generic platform driver
[    3.578569] ohci-exynos: OHCI EXYNOS driver
[    3.584105] usbcore: registered new interface driver uas
[    3.590165] usbcore: registered new interface driver usb-storage
[    3.596954] usbcore: registered new interface driver ums-cypress
[    3.603865] usbcore: registered new interface driver ums_eneub6250
[    3.610863] usbcore: registered new interface driver ums-freecom
[    3.617653] usbcore: registered new interface driver ums-isd200
[    3.624342] usbcore: registered new interface driver ums-usbat
[    3.639763] i2c /dev entries driver
[    3.647409] rk808 0-001b: chip id: 0x0
[    3.655723] DCDC_REG1: supplied by vcc_sys
[    3.661291] DCDC_REG2: supplied by vcc_sys
[    3.666764] DCDC_REG3: supplied by vcc_sys
[    3.671733] DCDC_REG4: supplied by vcc_sys
[    3.676997] LDO_REG1: supplied by vcc_sys
[    3.683031] LDO_REG2: supplied by vcc_sys
[    3.688622] LDO_REG3: supplied by vcc_sys
[    3.694375] LDO_REG4: supplied by vcc_io
[    3.700012] LDO_REG5: supplied by vcc_io
[    3.705099] LDO_REG6: supplied by vcc_io
[    3.710759] LDO_REG7: supplied by vcc_sys
[    3.716482] LDO_REG8: supplied by vcc_sys
[    3.722230] SWITCH_REG1: supplied by vcc_io
[    3.727301] SWITCH_REG2: supplied by vcc_io
[    3.735763] rk808-rtc rk808-rtc: registered as rtc0
[    3.749792] rockchip-thermal ff280000.tsadc: Missing rockchip,grf property
[    3.761234] of: /cpus/cpu@501: Couldn't find opp node
[    3.769181] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 500000 KHz
[    3.777814] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz
[    3.788436] sdhci: Secure Digital Host Controller Interface driver
[    3.795366] usb 1-1: new high-speed USB device number 2 using dwc2
[    3.802283] sdhci: Copyright(c) Pierre Ossman
[    3.807643] Synopsys Designware Multimedia Card Interface Driver
[    3.814968] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.823112] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
[    3.830705] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
[    3.837154] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
[    3.848176] mmc_host mmc0: card is polling.
[    3.865859] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    3.866082] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.896808] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.904997] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
[    3.912595] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
[    3.919050] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[    3.930089] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
[    3.936715] mmc_host mmc1: card is non-removable.
[    3.954737] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.965656] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    3.977924] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.986112] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
[    3.993737] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
[    4.000203] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[    4.011157] mmc_host mmc2: card is non-removable.
[    4.018487] random: fast init done
[    4.022862] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[    4.029024] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.032007] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.032010] usb 1-1: Product: USB2.0 Hub
[    4.054782] hub 1-1:1.0: USB hub found
[    4.057677] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    4.067422] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    4.070071] usbcore: registered new interface driver vub300
[    4.070142] hub 1-1:1.0: 4 ports detected
[    4.070631] mmc1: new high speed SDIO card at address 0001
[    4.077291] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    4.077987] usbcore: registered new interface driver ushc
[    4.078336] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.116767] ledtrig-cpu: registered to indicate activity on CPUs
[    4.123781] hidraw: raw HID events driver (C) Jiri Kosina
[    4.129966] usbcore: registered new interface driver usbhid
[    4.136204] usbhid: USB HID core driver
[    4.142975] NET: Registered protocol family 10
[    4.164622] Segment Routing with IPv6
[    4.168774] mip6: Mobile IPv6
[    4.170149] mmc_host mmc0: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1)
[    4.172109] NET: Registered protocol family 17
[    4.191395] Key type dns_resolver registered
[    4.196234] ThumbEE CPU extension supported.
[    4.201008] Registering SWP/SWPB emulation handler
[    4.204746] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    4.206671] registered taskstats version 1
[    4.222153] Loading compiled-in X.509 certificates
[    4.227549] zswap: loaded using pool lzo/zbud
[    4.233175] Btrfs loaded, crc32c=crc32c-generic
[    4.241066] usb 2-1: config 1 has an invalid interface number: 255 but max is 6
[    4.249271] usb 2-1: config 1 has no interface number 6
[    4.253269] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.256412] usb 2-1: New USB device found, idVendor=0bda, idProduct=481a, bcdDevice= 0.00
[    4.271768] rk808-rtc rk808-rtc: setting system clock to 2019-08-17T03:54:49 UTC (1566014089)
[    4.271772] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.281787] vcc_sd: supplied by vcc_io
[    4.289277] usb 2-1: Product: USB Audio
[    4.289280] usb 2-1: Manufacturer: Generic
[    4.293522] vcc_sd: disabling
[    4.297750] usb 2-1: SerialNumber: 201405280001
[    4.302350] ALSA device list:
[    4.314001]   No soundcards found.
[    4.317951] ttyS2 - failed to request DMA
[    4.318038] input: Generic USB Audio Consumer Control as /devices/platform/ff500000.usb/usb2/2-1/2-1:1.255/0003:0BDA:481A.0001/input/input1
[    4.337383] Freeing unused kernel memory: 2048K
[    4.342572] Run /init as init process
:: running early hook [udev]
[    4.394000] input: Generic USB Audio as /devices/platform/ff500000.usb/usb2/2-1/2-1:1.255/0003:0BDA:481A.0001/input/input2
Starting version 242.84-1-arch[    4.406590] hid-generic 0003:0BDA:481A.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-ff500000.usb-1/input255

:: running hook [udev]
:: Triggering uevents...
Waiting 10 seconds for device /dev/disk/by-label/TB-MM-root ...
[    4.821891] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 210
[    4.831847] mmc2: new HS200 MMC card at address 0001
[    4.838466] mmcblk2: mmc2:0001 HAG4a2 14.7 GiB
[    4.844175] mmcblk2boot0: mmc2:0001 HAG4a2 partition 1 4.00 MiB
[    4.851561] mmcblk2boot1: mmc2:0001 HAG4a2 partition 2 4.00 MiB
[    4.858330] mmcblk2rpmb: mmc2:0001 HAG4a2 partition 3 4.00 MiB, chardev (241:0)
[    4.867622]  mmcblk2: p1 p2
:: performing fsck on '/dev/disk/by-label/TB-MM-root'
TB-MM-root: clean, 109482/335872 files, 956089/1311488 blocks
:: mounting '/dev/disk/by-label/TB-MM-root' on real root
[    5.093935] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null)
:: running cleanup hook [udev]
[    5.341170] systemd[1]: systemd 242.84-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.366446] systemd[1]: Detected architecture arm.

Welcome to Arch Linux ARM!

[    5.394114] systemd[1]: Set hostname to <alarm>.
[    5.629244] random: systemd: uninitialized urandom read (16 bytes read)
[    5.638629] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[    5.657948] random: systemd: uninitialized urandom read (16 bytes read)
[    5.665917] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    5.685940] random: systemd: uninitialized urandom read (16 bytes read)
[    5.696195] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    5.713947] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    5.730507] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[  OK  ] Created slice system-systemd\x2dfsck.slice.
[    5.750063] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[    5.778620] systemd[1]: Created slice system-netctl.slice.
[  OK  ] Created slice system-netctl.slice.
[  OK  ] Listening on Network Service Netlink Socket.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Listening on Journal Socket.
         Starting Load Kernel Modules...
         Mounting Kernel Debug File System...
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Listening on initctl Compatibility Named Pipe.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Set up automount Arbitrary…s File System Automount Po[    5.932549] EXT4-fs (mmcblk2p1): re-mounted. Opts: data=ordered
int.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Socket (/dev/log).
         Starting Journal Service...
[  OK  ] Listening on Process Core Dump Socket.
[  OK  ] Reached target Remote File Systems.
         Mounting POSIX Message Queue File System...
[  OK  ] Reached target Local Encrypted Volumes.
         Starting Create list of re…odes for the current kernel...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Reached target Slices.
[  OK  ] Reached target Paths.
[  OK  ] Listening on udev Control Socket.
         Starting udev Coldplug all Devices...
[  OK  ] Started Journal Service.
[    6.166211] audit: type=1130 audit(1566014091.400:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Load Kernel Modules.
[    6.198038] audit: type=1130 audit(1566014091.432:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[    6.246014] audit: type=1130 audit(1566014091.480:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Create list of req… nodes for the current kernel.
[    6.298010] audit: type=1130 audit(1566014091.532:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting Load/Save Random Seed...
         Starting Create Static Device Nodes in /dev...
         Mounting Kernel Configuration File System...
         Starting Apply Kernel Variables...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Load/Save Random Seed.
[    6.406300] audit: type=1130 audit(1566014091.640:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started udev Coldplug all Devices.
[    6.441987] audit: type=1130 audit(1566014091.676:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Create Static Device Nodes in /dev.
[    6.477987] audit: type=1130 audit(1566014091.712:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Started Apply Kernel Variables.
[    6.525965] audit: type=1130 audit(1566014091.760:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.545856] dwmmc_rockchip ff0c0000.dwmmc: Unexpected interrupt latency
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
[  OK  ] Mounted /tmp.
[    6.614735] systemd-journald[245]: Received request to flush runtime journal from PID 1
[  OK  ] Started udev Kernel Device Manager.
[    6.706454] audit: type=1130 audit(1566014091.940:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.725871] dwmmc_rockchip ff0c0000.dwmmc: Unexpected interrupt latency
[    6.735345] dwmmc_rockchip ff0f0000.dwmmc: CTO timeout when already completed
         Starting Network Service...
[  OK  ] Started Network Service.
[    6.902241] audit: type=1130 audit(1566014092.136:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Flush Journal to Persistent Storage.
[    7.010611] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock
[    7.023896] rockchip-vop ff930000.vop: Adding to iommu group 0
[    7.039871] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input).
[    7.051991] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
[    7.053639] rockchip-vop ff940000.vop: Adding to iommu group 1
[    7.061903] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
[    7.070988] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm])
[    7.071350] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no).
[    7.084249] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm])
[    7.088432] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed
[    7.098682] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY)
[    7.108504] rk_gmac-dwmac ff290000.ethernet: clock input from PHY
[    7.124378] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[    7.128642] rk_gmac-dwmac ff290000.ethernet: init for RGMII
[    7.135347] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.148924] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    7.150478] [drm] No driver support for vblank timestamp query.
[    7.156975] rk_gmac-dwmac ff290000.ethernet:         DWMAC1000
[    7.163601] [drm] Cannot find any crtc or sizes
[  OK  [    7.175307] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported
[    7.182622] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
] Found device /dev/ttyS2.
[    7.184811] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported
[    7.205995] rk_gmac-dwmac ff290000.ethernet: COE Type 2
[    7.211868] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported
[    7.219785] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported
[    7.227033] rk_gmac-dwmac ff290000.ethernet: Normal descriptors
[    7.233673] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled
[    7.240218] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    7.274013] panfrost ffa30000.gpu: clock rate = 400000000
[    7.280568] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1
[    7.287783] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.293150] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400
[    7.307271] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[  OK  [    7.321450] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1
] Found device /dev/disk/by-label/TB-MM-home.
[    7.337100] [drm] Initialized panfrost 1.0.0 20180908 for ffa30000.gpu on minor 1
[    7.346935] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.361891] rockchip-rga ff920000.rga: HW Version: 0x00.00
[    7.364865] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    7.377809] cfg80211: failed to load regulatory.db
[    7.385800] rockchip-rga ff920000.rga: Registered rockchip-rga as /dev/video0
         Starting File System Check…ev/disk/by-label/TB-MM-home...
[    7.401524] rk3288-crypto ff8a0000.cypto-controller: Crypto Accelerator successfully registered
[    7.409941] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[    7.431061] RTL8723BS: module init start
[    7.437087] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[    7.445967] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[    7.453979] pnetdev = (ptrval)
[  OK  ] Started File System Check …/dev/disk/by-label/TB-MM-home.
[    7.514137] RTL8723BS: rtw_ndev_init(wlan0)
[    7.521340] RTL8723BS: module init ret =0
         Mounting /home...
[    7.535854] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: data=ordered
[  OK  ] Mounted /home.
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Entropy Harvesting Daemon...
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Entropy Harvesting Daemon.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily man-db regeneration.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Daily verification of password and group files.
         Starting Login Service...
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Reached target Timers.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Load/Save RF Kill Switch Status.
[    8.145308] asoc-simple-card sound: i2s-hifi <-> ff890000.i2s mapping ok
[  OK  ] Started Login Service.
[    8.193960] [drm] Cannot find any crtc or sizes
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /sys/subsystem/net/devices/wlan0.
         Starting A simple WPA encrypted wireless connection...
[    8.341951] libphy: stmmac: probed
[    8.346105] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    8.363378] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    8.409302] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[    8.432946] random: crng init done
[    8.436752] random: 7 urandom warning(s) missed due to ratelimiting
[    9.527291] usbcore: registered new interface driver snd-usb-audio
[    9.723953] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    9.745885] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found
[    9.754378] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW
[   11.221007] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   11.436489] RTL8723BS: start auth
[   11.450008] RTL8723BS: auth success, start assoc
[   11.459933] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[   11.467819] RTL8723BS: assoc success
[   11.473230] RTL8723BS: send eapol packet
[   11.484393] RTL8723BS: send eapol packet
[   11.489031] RTL8723BS: set pairwise key camid:4, addr:00:ad:24:59:41:0c, kid:0, type:AES
[   11.489190] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   11.506663] RTL8723BS: set group key camid:5, addr:00:ad:24:59:41:0c, kid:2, type:TKIP
[  OK  ] Started A simple WPA encrypted wireless connection.
[   11.549763] 8021q: 802.1Q VLAN Support v1.8
[   11.558397] kauditd_printk_skb: 10 callbacks suppressed
[   11.558401] audit: type=1130 audit(1566014096.792:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=netctl@wlrouter comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.581853] dwmmc_rockchip ff0f0000.dwmmc: Unexpected interrupt latency
[   11.585850] dwmmc_rockchip ff0c0000.dwmmc: Unexpected interrupt latency
[  OK  ] Reached target Network.
[  OK  ] Started vsftpd daemon.
[   11.630499] audit: type=1130 audit(1566014096.864:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=vsftpd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started OpenSSH Daemon.
[   11.667266] audit: type=1130 audit(1566014096.900:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.685856] dwmmc_rockchip ff0f0000.dwmmc: Unexpected interrupt latency
[  OK  ] Started Home assistant.
[   11.707496] audit: type=1130 audit(1566014096.940:25): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=home-assistant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.725853] dwmmc_rockchip ff0f0000.dwmmc: Unexpected interrupt latency
         Starting Permit User Sessions...
[  OK  ] Started Permit User Sessions.
[   11.767146] audit: type=1130 audit(1566014097.000:26): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Serial Getty on ttyS2.
[   11.802432] audit: type=1130 audit(1566014097.036:27): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=serial-getty@ttyS2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Getty on tty1.
[   11.842373] audit: type=1130 audit(1566014097.076:28): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Reached target Login Prompts.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.

Arch Linux 5.2.8-2-ARCH (ttyS2)

alarm login: [   13.125683] audit: type=1131 audit(1566014098.356:29): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

#===============================================================================
#                       Summers's DTS + broken CD
#===============================================================================


U-Boot SPL 2018.09-armbian (Nov 29 2018 - 12:02:48 +0100)
Returning to boot ROM...


U-Boot 2018.09-armbian (Nov 29 2018 - 12:02:48 +0100)

Model: Tinker-RK3288
DRAM:  2 GiB
PC event = 0x20
usb connected to SDP, force enter ums mode
rk3288_maskrom_ctrl: enable_emmc = 1
usb_current_limit_ctrl: unlock_current = 1
MMC:   dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
Loading Environment from EXT4... ** File not found /boot/boot.env **

** Unable to read "/boot/boot.env" from mmc0:1 **
In:    serial
Out:   serial
Err:   serial
Model: Tinker-RK3288
Net:   eth0: ethernet@ff290000
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1d5a000
\wait for usb get descriptor cmd timeout
rk3288_maskrom_ctrl: enable_emmc = 0
usb_current_limit_ctrl: unlock_current = 0
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
839 bytes read in 0 ms
## Executing script at 00000000
6798328 bytes read in 159 ms (40.8 MiB/s)
39990 bytes read in 2 ms (19.1 MiB/s)
6554186 bytes read in 154 ms (40.6 MiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to 0f9bf000, end 0ffff24a ... OK
   reserving fdt memory region: addr=1f00000 size=a000
   Loading Device Tree to 0f9b2000, end 0f9befff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Linux version 5.2.8-2-ARCH (builduser@leming) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Tue Aug 13 00:14:58 UTC 2019
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Rockchip RK3288 Asus Tinker Board S
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 64 MiB at 0x2c000000
[    0.000000] percpu: Embedded 17 pages/cpu s38092 r8192 d23348 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522560
[    0.000000] Kernel command line: console=ttyS2,115200n8 root=LABEL=TB-MM-root rw rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1981908K/2097152K available (13312K kernel code, 1067K rwdata, 5536K rodata, 2048K init, 883K bss, 49708K reserved, 65536K cma-reserved, 1310720K highmem)
[    0.000000] random: get_random_u32 called from __kmem_cache_create+0x28/0x3a0 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000023] Switching to timer-based delay loop, resolution 41ns
[    0.004633] Console: colour dummy device 80x30
[    0.004687] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.004708] pid_max: default: 32768 minimum: 301
[    0.004952] LSM: Security Framework initializing
[    0.005114] Smack:  Initializing.
[    0.005123] Smack:  IPv6 port labeling enabled.
[    0.005313] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.005332] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006095] *** VALIDATE proc ***
[    0.006409] *** VALIDATE cgroup1 ***
[    0.006425] *** VALIDATE cgroup2 ***
[    0.006492] CPU: Testing write buffer coherency: ok
[    0.006525] CPU0: Spectre v2: using BPIALL workaround
[    0.006869] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.028762] Setting up static identity map for 0x300000 - 0x3000ac
[    0.036764] rcu: Hierarchical SRCU implementation.
[    0.056877] smp: Bringing up secondary CPUs ...
[    0.090297] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.090306] CPU1: Spectre v2: using BPIALL workaround
[    0.122461] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.122469] CPU2: Spectre v2: using BPIALL workaround
[    0.154629] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.154637] CPU3: Spectre v2: using BPIALL workaround
[    0.154821] smp: Brought up 1 node, 4 CPUs
[    0.154837] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.154846] CPU: All CPU(s) started in SVC mode.
[    0.156487] devtmpfs: initialized
[    0.166890] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.167366] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.167389] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.169501] xor: measuring software checksum speed
[    0.209617]    arm4regs  :  1050.000 MB/sec
[    0.249691]    8regs     :   809.000 MB/sec
[    0.289783]    32regs    :   787.000 MB/sec
[    0.329875]    neon      :  1394.000 MB/sec
[    0.329886] xor: using function: neon (1394.000 MB/sec)
[    0.329947] pinctrl core: initialized pinctrl subsystem
[    0.332018] NET: Registered protocol family 16
[    0.335021] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.336003] audit: initializing netlink subsys (disabled)
[    0.337797] cpuidle: using governor menu
[    0.338579] No ATAGs?
[    0.338654] audit: type=2000 audit(0.332:1): state=initialized audit_enabled=0 res=1
[    0.338776] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.338788] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.340180] Serial: AMBA PL011 UART driver
[    0.482694] raid6: neonx8   gen()   632 MB/s
[    0.550890] raid6: neonx8   xor()   624 MB/s
[    0.619110] raid6: neonx4   gen()   669 MB/s
[    0.687312] raid6: neonx4   xor()   713 MB/s
[    0.755619] raid6: neonx2   gen()   418 MB/s
[    0.823784] raid6: neonx2   xor()   600 MB/s
[    0.892023] raid6: neonx1   gen()   337 MB/s
[    0.960147] raid6: neonx1   xor()   459 MB/s
[    1.028347] raid6: int32x8  gen()   191 MB/s
[    1.096603] raid6: int32x8  xor()   140 MB/s
[    1.164869] raid6: int32x4  gen()   165 MB/s
[    1.232853] raid6: int32x4  xor()   143 MB/s
[    1.301168] raid6: int32x2  gen()   119 MB/s
[    1.369103] raid6: int32x2  xor()   134 MB/s
[    1.437531] raid6: int32x1  gen()    98 MB/s
[    1.505394] raid6: int32x1  xor()   107 MB/s
[    1.505405] raid6: using algorithm neonx4 gen() 669 MB/s
[    1.505414] raid6: .... xor() 713 MB/s, rmw enabled
[    1.505424] raid6: using neon recovery algorithm
[    1.509740] sdmmc-regulator GPIO handle specifies active low - ignored
[    1.516280] vgaarb: loaded
[    1.517129] SCSI subsystem initialized
[    1.517638] usbcore: registered new interface driver usbfs
[    1.517702] usbcore: registered new interface driver hub
[    1.517819] usbcore: registered new device driver usb
[    1.519514] media: Linux media interface: v0.10
[    1.519560] videodev: Linux video capture interface: v2.00
[    1.519683] pps_core: LinuxPPS API ver. 1 registered
[    1.519695] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.519721] PTP clock support registered
[    1.519760] EDAC MC: Ver: 3.0.0
[    1.521045] Advanced Linux Sound Architecture Driver Initialized.
[    1.521634] NetLabel: Initializing
[    1.521648] NetLabel:  domain hash size = 128
[    1.521657] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.521736] NetLabel:  unlabeled traffic allowed by default
[    1.522122] clocksource: Switched to clocksource arch_sys_counter
[    1.522442] VFS: Disk quotas dquot_6.6.0
[    1.522540] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.536569] NET: Registered protocol family 2
[    1.537459] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    1.537506] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.537590] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.537782] TCP: Hash tables configured (established 8192 bind 8192)
[    1.537913] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.537968] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.538297] NET: Registered protocol family 1
[    1.538972] RPC: Registered named UNIX socket transport module.
[    1.538986] RPC: Registered udp transport module.
[    1.538996] RPC: Registered tcp transport module.
[    1.539006] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.539023] PCI: CLS 0 bytes, default 64
[    1.539518] Trying to unpack rootfs image as initramfs...
[    2.091297] Freeing initrd memory: 6404K
[    2.092120] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
[    2.114069] Initialise system trusted keyrings
[    2.114381] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    2.120183] zbud: loaded
[    2.122453] NFS: Registering the id_resolver key type
[    2.122487] Key type id_resolver registered
[    2.122498] Key type id_legacy registered
[    2.122521] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.134420] Key type asymmetric registered
[    2.134436] Asymmetric key parser 'x509' registered
[    2.134509] bounce: pool size: 64 pages
[    2.134573] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    2.134775] io scheduler mq-deadline registered
[    2.134789] io scheduler kyber registered
[    2.135058] io scheduler bfq registered
[    2.163142] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.163163] dma-pl330 ff250000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    2.164033] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.164053] dma-pl330 ffb20000.dma-controller:       DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    2.172235] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
[    2.175877] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[    2.176929] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 36, base_baud = 1500000) is a 16550A
[    2.178054] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 37, base_baud = 1500000) is a 16550A
[    3.158309] printk: console [ttyS2] enabled
[    3.164083] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 38, base_baud = 1500000) is a 16550A
[    3.175132] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 39, base_baud = 1500000) is a 16550A
[    3.186840] Serial: AMBA driver
[    3.209958] loop: module loaded
[    3.215153] Loading iSCSI transport class v2.0-870.
[    3.221076] iscsi: registered transport (tcp)
[    3.233339] libphy: Fixed MDIO Bus: probed
[    3.242940] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator
[    3.252308] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator
[    3.318512] dwc2 ff540000.usb: DWC OTG Controller
[    3.323836] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
[    3.331790] dwc2 ff540000.usb: irq 44, io mem 0xff540000
[    3.338032] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    3.347310] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.355405] usb usb1: Product: DWC OTG Controller
[    3.360686] usb usb1: Manufacturer: Linux 5.2.8-2-ARCH dwc2_hsotg
[    3.367521] usb usb1: SerialNumber: ff540000.usb
[    3.373411] hub 1-0:1.0: USB hub found
[    3.377692] hub 1-0:1.0: 1 port detected
[    3.382881] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
[    3.392247] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
[    3.401842] dwc2 ff580000.usb: dwc2_core_reset: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST
[    3.411901] dwc2: probe of ff580000.usb failed with error -16
[    3.419171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.426535] ehci-pci: EHCI PCI platform driver
[    3.431596] ehci-platform: EHCI generic platform driver
[    3.437746] ehci-platform ff500000.usb: EHCI Host Controller
[    3.444133] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 2
[    3.453165] ehci-platform ff500000.usb: irq 43, io mem 0xff500000
[    3.474169] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
[    3.481356] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    3.490748] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.498856] usb usb2: Product: EHCI Host Controller
[    3.504333] usb usb2: Manufacturer: Linux 5.2.8-2-ARCH ehci_hcd
[    3.510976] usb usb2: SerialNumber: ff500000.usb
[    3.516802] hub 2-0:1.0: USB hub found
[    3.521076] hub 2-0:1.0: 1 port detected
[    3.526205] ehci-mxc: Freescale On-Chip EHCI Host driver
[    3.532310] ehci-omap: OMAP-EHCI Host Controller driver
[    3.538376] ehci-orion: EHCI orion driver
[    3.543103] ehci-exynos: EHCI EXYNOS driver
[    3.547993] tegra-ehci: Tegra EHCI driver
[    3.552717] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.559671] ohci-pci: OHCI PCI platform driver
[    3.564720] ohci-platform: OHCI generic platform driver
[    3.570844] ohci-exynos: OHCI EXYNOS driver
[    3.576384] usbcore: registered new interface driver uas
[    3.582446] usbcore: registered new interface driver usb-storage
[    3.589234] usbcore: registered new interface driver ums-cypress
[    3.596143] usbcore: registered new interface driver ums_eneub6250
[    3.603142] usbcore: registered new interface driver ums-freecom
[    3.609932] usbcore: registered new interface driver ums-isd200
[    3.616635] usbcore: registered new interface driver ums-usbat
[    3.632057] i2c /dev entries driver
[    3.639688] rk808 0-001b: chip id: 0x0
[    3.648013] DCDC_REG1: supplied by vcc_sys
[    3.653591] DCDC_REG2: supplied by vcc_sys
[    3.659085] DCDC_REG3: supplied by vcc_sys
[    3.664047] DCDC_REG4: supplied by vcc_sys
[    3.669307] LDO_REG1: supplied by vcc_sys
[    3.675333] LDO_REG2: supplied by vcc_sys
[    3.680900] LDO_REG3: supplied by vcc_sys
[    3.686634] LDO_REG4: supplied by vcc_io
[    3.692261] LDO_REG5: supplied by vcc_io
[    3.697336] LDO_REG6: supplied by vcc_io
[    3.703002] LDO_REG7: supplied by vcc_sys
[    3.708730] LDO_REG8: supplied by vcc_sys
[    3.714478] SWITCH_REG1: supplied by vcc_io
[    3.719549] SWITCH_REG2: supplied by vcc_io
[    3.728008] rk808-rtc rk808-rtc: registered as rtc0
[    3.742069] rockchip-thermal ff280000.tsadc: Missing rockchip,grf property
[    3.753528] of: /cpus/cpu@501: Couldn't find opp node
[    3.761531] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 500000 KHz
[    3.770233] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz
[    3.780855] sdhci: Secure Digital Host Controller Interface driver
[    3.787780] usb 1-1: new high-speed USB device number 2 using dwc2
[    3.794698] sdhci: Copyright(c) Pierre Ossman
[    3.800054] Synopsys Designware Multimedia Card Interface Driver
[    3.807388] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.815522] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
[    3.823116] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
[    3.829564] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
[    3.840586] mmc_host mmc0: card is polling.
[    3.858111] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    3.858493] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.889044] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.897236] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
[    3.904843] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
[    3.911296] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[    3.922320] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
[    3.928942] mmc_host mmc1: card is non-removable.
[    3.947387] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    3.947390] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.960257] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
[    3.976180] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
[    3.983784] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
[    3.990237] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[    3.990375] random: fast init done
[    4.001170] mmc_host mmc2: card is non-removable.
[    4.006175] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[    4.019310] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.022797] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.023300] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    4.023897] mmc1: new high speed SDIO card at address 0001
[    4.027286] usb 1-1: Product: USB2.0 Hub
[    4.027711] hub 1-1:1.0: USB hub found
[    4.038225] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    4.048784] hub 1-1:1.0: 4 ports detected
[    4.054745] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    4.066316] usbcore: registered new interface driver vub300
[    4.091480] usbcore: registered new interface driver ushc
[    4.097893] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.105448] ledtrig-cpu: registered to indicate activity on CPUs
[    4.112398] hidraw: raw HID events driver (C) Jiri Kosina
[    4.118577] usbcore: registered new interface driver usbhid
[    4.124827] usbhid: USB HID core driver
[    4.131612] NET: Registered protocol family 10
[    4.152857] Segment Routing with IPv6
[    4.153555] mmc_host mmc0: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1)
[    4.157002] mip6: Mobile IPv6
[    4.170504] NET: Registered protocol family 17
[    4.175575] Key type dns_resolver registered
[    4.180420] ThumbEE CPU extension supported.
[    4.185196] Registering SWP/SWPB emulation handler
[    4.190865] registered taskstats version 1
[    4.195447] Loading compiled-in X.509 certificates
[    4.200847] zswap: loaded using pool lzo/zbud
[    4.206502] Btrfs loaded, crc32c=crc32c-generic
[    4.209020] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    4.221779] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.230812] rk808-rtc rk808-rtc: setting system clock to 2019-08-17T04:02:17 UTC (1566014537)
[    4.240826] vcc_sd: supplied by vcc_io
[    4.245065] vcc_sd: disabling
[    4.248385] ALSA device list:
[    4.248550] usb 2-1: config 1 has an invalid interface number: 255 but max is 6
[    4.251699]   No soundcards found.
[    4.263669] usb 2-1: config 1 has no interface number 6
[    4.264909] usb 2-1: New USB device found, idVendor=0bda, idProduct=481a, bcdDevice= 0.00
[   4.278650] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[[    4.286630] usb 2-1: Manufacturer: Generic
[    4.286631] ttyS2 - failed to request DMA
[    4.295681] usb 2-1: SerialNumber: 201405280001
[    4.301629] Freeing unused kernel memory: 2048K
[    4.306855] Run /init as init process
[    4.307051] input: Generic USB Audio Consumer Control as /devices/platform/ff500000.usb/usb2/2-1/2-1:1.255/0003:0BDA:481A.0001/input/input1
:: running early hook [udev]
Starting version 242.84-1-arch
:: running hook [udev]
:: Triggering uevents...
[    4.382261] input: Generic USB Audio as /devices/platform/ff500000.usb/usb2/2-1/2-1:1.255/0003:0BDA:481A.0001/input/input2
[    4.394894] hid-generic 0003:0BDA:481A.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-ff500000.usb-1/input255
Waiting 10 seconds for device /dev/disk/by-label/TB-MM-root ...
[    4.818139] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 210
[    4.828077] mmc2: new HS200 MMC card at address 0001
[    4.834484] mmcblk2: mmc2:0001 HAG4a2 14.7 GiB
[    4.840237] mmcblk2boot0: mmc2:0001 HAG4a2 partition 1 4.00 MiB
[    4.847645] mmcblk2boot1: mmc2:0001 HAG4a2 partition 2 4.00 MiB
[    4.854417] mmcblk2rpmb: mmc2:0001 HAG4a2 partition 3 4.00 MiB, chardev (241:0)
[    4.867837]  mmcblk2: p1 p2
:: performing fsck on '/dev/disk/by-label/TB-MM-root'
TB-MM-root: clean, 109482/335872 files, 956091/1311488 blocks
:: mounting '/dev/disk/by-label/TB-MM-root' on real root
[    5.049700] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null)
:: running cleanup hook [udev]
[    5.294319] systemd[1]: systemd 242.84-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.319854] systemd[1]: Detected architecture arm.

Welcome to Arch Linux ARM!

[    5.350367] systemd[1]: Set hostname to <alarm>.
[    5.584389] random: systemd: uninitialized urandom read (16 bytes read)
[    5.593204] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    5.610253] random: systemd: uninitialized urandom read (16 bytes read)
[    5.617791] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[    5.646184] random: systemd: uninitialized urandom read (16 bytes read)
[    5.654704] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[  OK  ] Created slice system-systemd\x2dfsck.slice.
[    5.677095] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    5.703327] systemd[1]: Listening on Process Core Dump Socket.
[  OK  ] Listening on Process Core Dump Socket.
[    5.722256] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    5.742714] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Reached target Swap.
[  OK  ] Reached target Slices.
[  OK  ] Created slice system-netctl.slice.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket.
         Mounting POSIX Message Queue File System...
         Starting Create list of re…odes for the current kernel...
         Mounting Kernel Debug File System...
         Starting Load Kernel Modules...
         Starting udev Coldplug all Devices...
         Starting Journal Service...
         Starting Remount Root and Kernel File Systems...
[    6.091378] EXT4-fs (mmcblk2p1): re-mounted. Opts: data=ordered
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Create list of req… nodes for the current kernel.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Started Load Kernel Modules.
[    6.154287] audit: type=1130 audit(1566014539.420:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Remount Root and Kernel File Systems.
[    6.190305] audit: type=1130 audit(1566014539.456:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.210115] dwmmc_rockchip ff0f0000.dwmmc: Unexpected interrupt latency
         Starting Load/Save Random Seed...
         Starting Apply Kernel Variables...
         Mounting Kernel Configuration File System...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Journal Service.
[    6.302414] audit: type=1130 audit(1566014539.568:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Load/Save Random Seed.
[    6.334273] audit: type=1130 audit(1566014539.600:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started udev Coldplug all Devices.
[    6.370569] audit: type=1130 audit(1566014539.636:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Apply Kernel Variables.
[    6.410208] audit: type=1130 audit(1566014539.676:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Started Create Static Device Nodes in /dev.
[    6.454218] audit: type=1130 audit(1566014539.720:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
         Starting udev Kernel Device Manager...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Mounted /tmp.
[    6.568820] systemd-journald[250]: Received request to flush runtime journal from PID 1
[  OK  ] Started udev Kernel Device Manager.
[    6.678683] audit: type=1130 audit(1566014539.944:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting Network Service...
[  OK  ] Started Flush Journal to Persistent Storage.
[    6.866276] audit: type=1130 audit(1566014540.132:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Network Service.
[    6.902297] audit: type=1130 audit(1566014540.168:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.003488] rockchip-vop ff930000.vop: Adding to iommu group 0
[    7.011504] rockchip-vop ff940000.vop: Adding to iommu group 1
[    7.022401] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock
[    7.023270] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm])
[    7.029403] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input).
[    7.039734] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm])
[    7.049783] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
[    7.057788] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY)
[    7.063937] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
[    7.063944] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no).
[    7.077862] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[    7.082668] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed
[    7.087635] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.098192] rk_gmac-dwmac ff290000.ethernet: clock input from PHY
[    7.103209] rk_gmac-dwmac ff290000.ethernet: init for RGMII
[    7.106057] [drm] No driver support for vblank timestamp query.
[    7.113526] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    7.120295] [drm] Cannot find any crtc or sizes
[    7.128423] rk_gmac-dwmac ff290000.ethernet:         DWMAC1000
[    7.128741] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.133607] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[    7.141103] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported
[    7.141107] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported
[    7.141110] rk_gmac-dwmac ff290000.ethernet: COE Type 2
[    7.141113] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported
[    7.141115] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported
[    7.141142] rk_gmac-dwmac ff290000.ethernet: Normal descriptors
[    7.141148] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled
[    7.162381] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.169615] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    7.228597] panfrost ffa30000.gpu: clock rate = 400000000
[  OK  [    7.243013] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1
] Found device /dev/ttyS2.
[    7.253593] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400
[    7.266487] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[    7.280005] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1
[    7.287862] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    7.289399] rockchip-rga ff920000.rga: HW Version: 0x00.00
[    7.305903] cfg80211: failed to load regulatory.db
[    7.307718] [drm] Initialized panfrost 1.0.0 20180908 for ffa30000.gpu on minor 1
[    7.320021] rockchip-rga ff920000.rga: Registered rockchip-rga as /dev/video0
[    7.333512] rk3288-crypto ff8a0000.cypto-controller: Crypto Accelerator successfully registered
[  OK  ] Found device /dev/disk/by-label/TB-MM-home.
[    7.349188] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[    7.386010] RTL8723BS: module init start
[    7.401790] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[    7.418231] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
         Starting File System Check…ev/disk/by-label/TB-MM-home...
[    7.438426] pnetdev = (ptrval)
[  OK  ] Started File System Check …/dev/disk/by-label/TB-MM-home.
         Mounting /home...
[    7.522038] RTL8723BS: rtw_ndev_init(wlan0)
[    7.528634] RTL8723BS: module init ret =0
[    7.534714] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: data=ordered
[  OK  ] Mounted /home.
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Entropy Harvesting Daemon...
         Starting Update UTMP about System Boot/Shutdown...
         Starting Network Time Synchronization...
[  OK  ] Started Entropy Harvesting Daemon.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily man-db regeneration.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Login Service...
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Daily verification of password and group files.
[  OK  ] Reached target Timers.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
         Starting Load/Save RF Kill Switch Status...
[    8.162203] [drm] Cannot find any crtc or sizes
[  OK  ] Started Login Service.
[    8.225695] libphy: stmmac: probed
[    8.230412] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    8.256793] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[  OK  ] Started Load/Save RF Kill Switch Status.
[    8.330396] asoc-simple-card sound: i2s-hifi <-> ff890000.i2s mapping ok
[  OK  ] Found device /sys/subsystem/net/devices/wlan0.
[  OK  ] Reached target Sound Card.
         Starting A simple WPA encrypted wireless connection...
[    8.484535] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    8.519178] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found
[    8.527702] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW
[    8.596931] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[    8.621615] random: crng init done
[    8.625423] random: 7 urandom warning(s) missed due to ratelimiting
[    9.265087] usbcore: registered new interface driver snd-usb-audio
[   11.409247] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   11.513602] RTL8723BS: start auth
[   11.526708] RTL8723BS: auth success, start assoc
[   11.536886] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[   11.544771] RTL8723BS: assoc success
[   11.551745] RTL8723BS: send eapol packet
[   11.564079] RTL8723BS: send eapol packet
[   11.568703] RTL8723BS: set pairwise key camid:4, addr:00:ad:24:59:41:0c, kid:0, type:AES
[   11.568862] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   11.578065] RTL8723BS: set group key camid:5, addr:00:ad:24:59:41:0c, kid:2, type:TKIP
[  OK  ] Started A simple WPA encrypted wireless connection.
[   11.718770] kauditd_printk_skb: 9 callbacks suppressed
[   11.718775] audit: type=1130 audit(1566014544.984:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=netctl@wlrouter comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Reached target Network.
[   11.748328] 8021q: 802.1Q VLAN Support v1.8
[  OK  ] Started vsftpd daemon.
[   11.774593] audit: type=1130 audit(1566014545.040:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=vsftpd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started OpenSSH Daemon.
[   11.810618] audit: type=1130 audit(1566014545.076:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Home assistant.
[   11.842651] audit: type=1130 audit(1566014545.108:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=home-assistant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.862109] dwmmc_rockchip ff0f0000.dwmmc: Unexpected interrupt latency
         Starting Permit User Sessions...
[  OK  ] Started Permit User Sessions.
[   11.907062] audit: type=1130 audit(1566014545.172:25): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Getty on tty1.
[   11.942991] audit: type=1130 audit(1566014545.208:26): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Serial Getty on ttyS2.
[   11.979272] audit: type=1130 audit(1566014545.244:27): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=serial-getty@ttyS2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Reached target Login Prompts.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.

Arch Linux 5.2.8-2-ARCH (ttyS2)

alarm login: [   13.311787] audit: type=1131 audit(1566014546.576:28): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=_ msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

