U-Boot SPL 2020.10 (Oct 20 2020 - 18:27:54 +0100)
Trying to boot from MMC1


U-Boot 2020.10 (Oct 20 2020 - 18:27:54 +0100)

CPU  : AM335X-GP rev 2.1
Model: TI AM335x PocketBeagle
DRAM:  512 MiB
WDT:   Started with servicing (60s timeout)
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
Loading Environment from FAT... Unable to use mmc 0:1... <ethaddr> not set. Validating first E-fuse MAC
Net:   No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Unrecognized filesystem type **
** Unrecognized filesystem type **
switch to partitions #0, OK
mmc0 is current device
** Unrecognized filesystem type **
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Invalid partition 2 **
MMC Device 1 not found
no mmc device at slot 1
MMC Device 1 not found
no mmc device at slot 1
SD/MMC found on device 1
## Error: "bootcmd_nand0" not defined
starting USB...
Bus usb@47401800: Port not available.
No ethernet found.
missing environment variable: pxeuuid
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
Retrieving file: pxelinux.cfg/000000
No ethernet found.
Retrieving file: pxelinux.cfg/00000
No ethernet found.
Retrieving file: pxelinux.cfg/0000
No ethernet found.
Retrieving file: pxelinux.cfg/000
No ethernet found.
Retrieving file: pxelinux.cfg/00
No ethernet found.
Retrieving file: pxelinux.cfg/0
No ethernet found.
Retrieving file: pxelinux.cfg/default-arm-am33xx-am335x
No ethernet found.
Retrieving file: pxelinux.cfg/default-arm-am33xx
No ethernet found.
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
starting USB...
Bus usb@47401800: Port not available.
No ethernet found.
No ethernet found.
=>
