linux-rpi 6.12.32-1 usb stops working on RPI3

[hyke]

USB doesn't work in 6.12.32-1 on my RPI 3b.

After reverting back to 6.12.31-1, the USB shows up again.

I'm going to guess it's from the removal of [code]CONFIG_USB_DWCOTG=y[/code]

from 6.12.31-1 dmesg on RPI 3
[ 2.043495] dwc_otg 3f980000.usb: DWC OTG Controller
[ 2.043648] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 2.043833] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[ 2.044481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 2.044647] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.044791] usb usb1: Product: DWC OTG Controller
[ 2.044894] usb usb1: Manufacturer: Linux 6.12.31-1-rpi dwc_otg_hcd
[ 2.045021] usb usb1: SerialNumber: 3f980000.usb

[baslking]

Same here. My Pi-4 and Pi-zero-2 boards work fine.

Is this a permanent change? Meaning it's the end of the road for Pi3's on Arch?

[graysky]

Yeah,make_clickable_callback(MAGIC_URL_FULL, ' ', 'https://github.com/raspberrypi/firmware/issues/1975', '', ' class="postlink"')

6.12.32-2 should fix it.

[hyke]

Looks like Raspberry Pi is in the process of depreciating their DWCOTG driver for the armv8 kernel build.

But there were some issues with the transition to using mainline dwc2 driver, and they reverted back for now.
make_clickable_callback(MAGIC_URL_FULL, '
', 'https://github.com/raspberrypi/linux/pull/6883', '', ' class="postlink"')make_clickable_callback(MAGIC_URL_FULL, '
', 'https://github.com/raspberrypi/linux/pull/6886', '', ' class="postlink"')make_clickable_callback(MAGIC_URL_FULL, '
', 'https://github.com/raspberrypi/firmware/issues/1975#issuecomment-2952987172', '', ' class="postlink"')

[denk]

Thanks for patching this before the next release.
However, it seems that the mirror sync has been stopped, as the packages since June 9th are not available, so also not this patched kernel package. Could that be, maybe due to some rebuild?