[linux-firmware] Raspberry pi 4 wlan0 is missing

[Synch]

$this->bbcode_second_pass_quote('graysky', 'D')oes firmware-raspberrypi-20210217 fix the issue for folks using other models? Works on RPi4B.

[graysky]

Can someone with a Pi0 please post the kernel log here with an up-to-date system showing the failing wifi.

[Synch]

$this->bbcode_second_pass_quote('graysky', 'C')an someone with a Pi0 please post the kernel log here with an up-to-date system showing the failing wifi.

[kmihelich]

Do a full system upgrade now, getting the latest linux-firmware and firmware-raspberrypi. Should be fixed.

[Synch]

Unfortunately, the new firmware-raspberrypi doesn't work with the latest linux-firmware on my RPi0. It fact, it doesn't work with the previous linux-firmware, either!

Here's what my dmesg put out. This was with all packages fully updated.

$this->bbcode_second_pass_code('', '[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.16-3-ARCH (builduser@leming) (armv6l-unknown-linux-gnueabihf-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP Tue Feb 16 18:41:54 UTC 2021
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Reserved memory: created CMA memory pool at 0x0e800000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000001effffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001effffff]
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] DMA zone: 1116 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 126976 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] percpu: Embedded 20 pages/cpu s51020 r8192 d22708 u81920
[ 0.000000] pcpu-alloc: s51020 r8192 d22708 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 125860
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=B8:27:EB:21:A9:D4 vc_mem.mem_base=0x1fa00000 vc_mem.mem_size=0x20000000 root=/dev/mmcblk0p2 rw rootwait console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 212732K/507904K available (13312K kernel code, 1494K rwdata, 3772K rodata, 1024K init, 922K bss, 33028K reserved, 262144K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x33c/0x58c with crng_init=0
[ 0.000029] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000093] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000202] bcm2835: system timer (irq = 27)
[ 0.001081] Console: colour dummy device 80x30
[ 0.001865] printk: console [tty1] enabled
[ 0.001969] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060411] pid_max: default: 32768 minimum: 301
[ 0.060993] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.061065] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.063610] Disabling memory control group subsystem
[ 0.063919] CPU: Testing write buffer coherency: ok
[ 0.064553] CPU0: thread -1, cpu 0, socket -1, mpidr 410fb767
[ 0.066664] Setting up static identity map for 0x100000 - 0x100054
[ 0.067101] rcu: Hierarchical SRCU implementation.
[ 0.068411] smp: Bringing up secondary CPUs ...
[ 0.068481] smp: Brought up 1 node, 1 CPU
[ 0.068519] SMP: Total of 1 processors activated (697.95 BogoMIPS).
[ 0.068553] CPU: All CPU(s) started in SVC mode.
[ 0.069677] devtmpfs: initialized
[ 0.088580] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.089037] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.089125] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.124151] pinctrl core: initialized pinctrl subsystem
[ 0.126221] NET: Registered protocol family 16
[ 0.137595] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.144459] audit: initializing netlink subsys (disabled)
[ 0.146387] thermal_sys: Registered thermal governor 'step_wise'
[ 0.147815] audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1
[ 0.147975] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.148019] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.148714] Serial: AMBA PL011 UART driver
[ 0.169176] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.181500] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-16T14:19:46, variant start_cd
[ 0.191538] raspberrypi-firmware soc:firmware: Firmware hash is d6d82cf99bcb3e9a166a34cfde53130957a36bd3
[ 0.255653] cryptd: max_cpu_qlen set to 1000
[ 0.432683] raid6: int32x8 gen() 121 MB/s
[ 0.603285] raid6: int32x8 xor() 80 MB/s
[ 0.773778] raid6: int32x4 gen() 119 MB/s
[ 0.944338] raid6: int32x4 xor() 79 MB/s
[ 1.114793] raid6: int32x2 gen() 91 MB/s
[ 1.285478] raid6: int32x2 xor() 58 MB/s
[ 1.456063] raid6: int32x1 gen() 54 MB/s
[ 1.626621] raid6: int32x1 xor() 41 MB/s
[ 1.626674] raid6: using algorithm int32x8 gen() 121 MB/s
[ 1.626710] raid6: .... xor() 80 MB/s, rmw enabled
[ 1.626742] raid6: using intx1 recovery algorithm
[ 1.628316] bcm2835-dma 20007000.dma: DMA legacy API manager, dmachans=0x1
[ 1.630894] vgaarb: loaded
[ 1.632063] SCSI subsystem initialized
[ 1.632612] usbcore: registered new interface driver usbfs
[ 1.632778] usbcore: registered new interface driver hub
[ 1.632942] usbcore: registered new device driver usb
[ 1.637994] clocksource: Switched to clocksource timer
[ 2.517990] random: fast init done
[ 3.580369] VFS: Disk quotas dquot_6.6.0
[ 3.580596] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.580975] FS-Cache: Loaded
[ 3.581470] CacheFiles: Loaded
[ 3.582452] simple-framebuffer 1f5ff000.framebuffer: framebuffer at 0x1f5ff000, 0x3fc000 bytes, mapped to 0x(ptrval)
[ 3.582538] simple-framebuffer 1f5ff000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[ 3.604906] Console: switching to colour frame buffer device 240x67
[ 3.624702] simple-framebuffer 1f5ff000.framebuffer: fb0: simplefb registered!
[ 3.647348] NET: Registered protocol family 2
[ 3.649735] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 3.650082] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 3.650351] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 3.650626] TCP: Hash tables configured (established 4096 bind 4096)
[ 3.650967] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.651177] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.651764] NET: Registered protocol family 1
[ 3.653523] RPC: Registered named UNIX socket transport module.
[ 3.653718] RPC: Registered udp transport module.
[ 3.653841] RPC: Registered tcp transport module.
[ 3.653956] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.654113] NET: Registered protocol family 44
[ 3.654251] PCI: CLS 0 bytes, default 64
[ 3.654859] Trying to unpack rootfs image as initramfs...
[ 4.451462] Freeing initrd memory: 6588K
[ 4.453201] hw perfevents: no irqs for PMU, sampling events not supported
[ 4.453568] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
[ 4.459274] Initialise system trusted keyrings
[ 4.460130] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 4.473356] zbud: loaded
[ 4.477300] FS-Cache: Netfs 'nfs' registered for caching
[ 4.479536] NFS: Registering the id_resolver key type
[ 4.479764] Key type id_resolver registered
[ 4.479884] Key type id_legacy registered
[ 4.480252] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 4.481508] JFS: nTxBlock = 3761, nTxLock = 30091
[ 4.484264] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 4.645593] jitterentropy: Initialization failed with host not compliant with requirements: 2
[ 4.646104] xor: measuring software checksum speed
[ 4.656223] arm4regs : 1002 MB/sec
[ 4.681509] 8regs : 505 MB/sec
[ 4.703948] 32regs : 584 MB/sec
[ 4.709450] xor: using function: arm4regs (1002 MB/sec)
[ 4.714875] async_tx: api initialized (async)
[ 4.720350] Key type asymmetric registered
[ 4.725844] Asymmetric key parser 'x509' registered
[ 4.731566] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 4.737730] io scheduler mq-deadline registered
[ 4.743636] io scheduler kyber registered
[ 4.749856] io scheduler bfq registered
[ 4.766243] vc-mem: phys_addr:0x00000000 mem_base=0x1fa00000 mem_size:0x20000000(512 MiB)
[ 4.774271] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[ 4.799515] loop: module loaded
[ 4.807741] Loading iSCSI transport class v2.0-870.
[ 4.818836] libphy: Fixed MDIO Bus: probed
[ 4.826213] usbcore: registered new interface driver lan78xx
[ 4.832467] usbcore: registered new interface driver ax88179_178a
[ 4.838773] usbcore: registered new interface driver cdc_ether
[ 4.844848] usbcore: registered new interface driver smsc95xx
[ 4.850885] usbcore: registered new interface driver cdc_ncm
[ 4.857317] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 5.591884] Core Release: 2.80a
[ 5.597819] Setting default values for core params
[ 5.603608] Finished setting default values for core params
[ 5.810036] Using Buffer DMA mode
[ 5.815854] Periodic Transfer Interrupt Enhancement - disabled
[ 5.821592] Multiprocessor Interrupt Enhancement - disabled
[ 5.827265] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 5.833040] Dedicated Tx FIFOs mode

[ 5.840174] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = 8e904000 dma = 0x8e904000 len=9024
[ 5.851546] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 5.878630] dwc_otg: Microframe scheduler enabled

[ 5.878860] WARN::hcd_init_fiq:457: FIQ on core 0

[ 5.889579] WARN::hcd_init_fiq:458: FIQ ASM at 80a431e4 length 36

[ 5.900194] WARN::hcd_init_fiq:496: MPHI regs_base at 9f810000
[ 5.911324] dwc_otg 20980000.usb: DWC OTG Controller
[ 5.916925] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 5.922618] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 5.928303] Init: Port Power? op_state=1
[ 5.933763] Init: Power Port (0)
[ 5.939819] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 5.945451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.950962] usb usb1: Product: DWC OTG Controller
[ 5.956428] usb usb1: Manufacturer: Linux 5.10.16-3-ARCH dwc_otg_hcd
[ 5.961921] usb usb1: SerialNumber: 20980000.usb
[ 5.968827] hub 1-0:1.0: USB hub found
[ 5.974591] hub 1-0:1.0: 1 port detected
[ 5.981828] dwc_otg: FIQ enabled
[ 5.981852] dwc_otg: NAK holdoff enabled
[ 5.981863] dwc_otg: FIQ split-transaction FSM enabled
[ 5.981886] Module dwc_common_port init
[ 5.982793] usbcore: registered new interface driver uas
[ 5.988899] usbcore: registered new interface driver usb-storage
[ 5.994474] usbcore: registered new interface driver ums-alauda
[ 6.000164] usbcore: registered new interface driver ums-cypress
[ 6.005609] usbcore: registered new interface driver ums-datafab
[ 6.011000] usbcore: registered new interface driver ums_eneub6250
[ 6.016180] usbcore: registered new interface driver ums-freecom
[ 6.021548] usbcore: registered new interface driver ums-isd200
[ 6.026741] usbcore: registered new interface driver ums-jumpshot
[ 6.031906] usbcore: registered new interface driver ums-karma
[ 6.037009] usbcore: registered new interface driver ums-onetouch
[ 6.042229] usbcore: registered new interface driver ums-realtek
[ 6.047281] usbcore: registered new interface driver ums-sddr09
[ 6.052313] usbcore: registered new interface driver ums-sddr55
[ 6.057221] usbcore: registered new interface driver ums-usbat
[ 6.062888] mousedev: PS/2 mouse device common for all mice
[ 6.070058] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 6.076101] device-mapper: uevent: version 1.0.3
[ 6.082078] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 6.089515] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 6.094437] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 6.099350] device-mapper: multipath service-time: version 0.3.0 loaded
[ 6.104080] device-mapper: raid: Loading target version 1.15.1
[ 6.112083] sdhci: Secure Digital Host Controller Interface driver
[ 6.116973] sdhci: Copyright(c) Pierre Ossman
[ 6.122748] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
[ 6.129239] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[ 6.133517] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
[ 6.137126] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.141863] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.145999] hid: raw HID events driver (C) Jiri Kosina
[ 6.150981] usbcore: registered new interface driver usbhid
[ 6.154631] usbhid: USB HID core driver
[ 6.164053] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 6.167740] [vc_sm_connected_init]: start
[ 6.198222] Indeed it is in host mode hprt0 = 00021501
[ 6.262694] vc_sm_cma_vchi_init: failed to open VCHI service (-1)
[ 6.262713] [vc_sm_connected_init]: failed to initialize shared memory service
[ 6.270708] Initializing XFRM netlink socket
[ 6.274406] NET: Registered protocol family 17
[ 6.278562] Key type dns_resolver registered
[ 6.282978] Registering SWP/SWPB emulation handler
[ 6.286782] registered taskstats version 1
[ 6.290572] Loading compiled-in X.509 certificates
[ 6.295359] Key type ._fscrypt registered
[ 6.299157] Key type .fscrypt registered
[ 6.302700] Key type fscrypt-provisioning registered
[ 6.308936] Btrfs loaded, crc32c=crc32c-generic
[ 6.351604] Key type encrypted registered
[ 6.368843] uart-pl011 20201000.serial: cts_event_workaround enabled
[ 6.372696] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 6.479406] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 6.486009] Indeed it is in host mode hprt0 = 00001101
[ 6.830588] usb 1-1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= d.a0
[ 6.830603] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.830611] usb 1-1: Product: USB2.0 Hub
[ 6.830618] usb 1-1: Manufacturer: VIA Labs, Inc.
[ 6.837765] hub 1-1:1.0: USB hub found
[ 6.845834] hub 1-1:1.0: 4 ports detected
[ 7.835839] printk: console [ttyAMA0] enabled
[ 7.846029] KGDB: Registered I/O driver kgdboc
[ 7.854615] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 7.867305] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 7.877234] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
[ 7.912358] sdhost: log_buf @ (ptrval) (8e903000)
[ 7.958632] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 7.969889] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 7.979760] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 8.013140] of_cfs_init
[ 8.020307] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.032138] of_cfs_init: OK
[ 8.043877] Freeing unused kernel memory: 1024K
[ 8.053269] Run /init as init process
[ 8.061049] with arguments:
[ 8.061065] /init
[ 8.061071] with environment:
[ 8.061077] HOME=/
[ 8.061082] TERM=linux
[ 8.061087] selinux=0
[ 8.061093] kgdboc=ttyAMA0,115200
[ 8.062020] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 8.102775] mmc0: host does not support reading read-only switch, assuming write-enable
[ 8.130448] mmc0: new high speed SDHC card at address 0007
[ 8.144019] mmcblk0: mmc0:0007 SL32G 29.0 GiB
[ 8.152864] usb 1-1.4: new full-speed USB device number 3 using dwc_otg
[ 8.178598] mmcblk0: p1 p2
[ 8.258433] mmc1: new high speed SDIO card at address 0001
[ 8.314474] usb 1-1.4: New USB device found, idVendor=24f0, idProduct=0140, bcdDevice= 1.00
[ 8.327271] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.338830] usb 1-1.4: Product: Das Keyboard
[ 8.347218] usb 1-1.4: Manufacturer: Metadot - Das Keyboard
[ 8.405510] input: Metadot - Das Keyboard Das Keyboard as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:24F0:0140.0001/input/input0
[ 8.519750] hid-generic 0003:24F0:0140.0001: input,hidraw0: USB HID v1.10 Keyboard [Metadot - Das Keyboard Das Keyboard] on usb-20980000.usb-1.4/input0
[ 8.526648] input: Metadot - Das Keyboard Das Keyboard System Control as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:24F0:0140.0002/input/input1
[ 8.588409] input: Metadot - Das Keyboard Das Keyboard Consumer Control as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:24F0:0140.0002/input/input2
[ 8.588903] hid-generic 0003:24F0:0140.0002: input,hidraw1: USB HID v1.10 Device [Metadot - Das Keyboard Das Keyboard] on usb-20980000.usb-1.4/input1
[ 11.693294] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.703154] systemd[1]: System time before build time, advancing clock.
[ 12.870789] NET: Registered protocol family 10
[ 12.984808] Segment Routing with IPv6
[ 13.093789] systemd[1]: systemd 247.3-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 13.131758] systemd[1]: Detected architecture arm.
[ 13.180578] systemd[1]: Set hostname to <nikita>.
[ 13.501508] random: crng init done
[ 14.020080] uart-pl011 20201000.serial: no DMA platform data
[ 15.265973] systemd[1]: Queued start job for default target Graphical Interface.
[ 15.384296] systemd[1]: Created slice system-getty.slice.
[ 15.407222] systemd[1]: Created slice system-modprobe.slice.
[ 15.429838] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 15.452753] systemd[1]: Created slice User and Session Slice.
[ 15.472316] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 15.494435] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 15.517536] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 15.541504] systemd[1]: Reached target Local Encrypted Volumes.
[ 15.561750] systemd[1]: Reached target Paths.
[ 15.580045] systemd[1]: Reached target Remote File Systems.
[ 15.599533] systemd[1]: Reached target Slices.
[ 15.619549] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 15.661570] systemd[1]: Listening on Process Core Dump Socket.
[ 15.683438] systemd[1]: Listening on Journal Audit Socket.
[ 15.704414] systemd[1]: Listening on Journal Socket (/dev/log).
[ 15.726168] systemd[1]: Listening on Journal Socket.
[ 15.747171] systemd[1]: Listening on Network Service Netlink Socket.
[ 15.769671] systemd[1]: Listening on udev Control Socket.
[ 15.790278] systemd[1]: Listening on udev Kernel Socket.
[ 15.811327] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 15.836502] systemd[1]: Mounting POSIX Message Queue File System...
[ 15.893495] systemd[1]: Mounting Kernel Debug File System...
[ 15.946410] systemd[1]: Mounting Kernel Trace File System...
[ 16.000090] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 16.056680] systemd[1]: Starting Load Kernel Module configfs...
[ 16.118876] systemd[1]: Starting Load Kernel Module drm...
[ 16.170574] systemd[1]: Starting Load Kernel Module fuse...
[ 16.233903] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 16.317276] fuse: init (API version 7.32)
[ 16.334509] systemd[1]: Starting Load Kernel Modules...
[ 16.397659] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 16.468986] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 16.526728] systemd[1]: Starting Coldplug All udev Devices...
[ 16.682331] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.701736] systemd[1]: Mounted POSIX Message Queue File System.
[ 16.765441] systemd[1]: Mounted Kernel Debug File System.
[ 16.777556] zram: Added device: zram0
[ 16.831525] systemd[1]: Mounted Kernel Trace File System.
[ 16.873444] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 16.930397] systemd[1]: modprobe@configfs.service: Succeeded.
[ 16.958753] systemd[1]: Finished Load Kernel Module configfs.
[ 17.002441] systemd[1]: modprobe@drm.service: Succeeded.
[ 17.032160] systemd[1]: Finished Load Kernel Module drm.
[ 17.079822] systemd[1]: modprobe@fuse.service: Succeeded.
[ 17.101864] systemd[1]: Finished Load Kernel Module fuse.
[ 17.158613] systemd[1]: Finished Load Kernel Modules.
[ 17.203785] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 17.278975] systemd[1]: Mounting FUSE Control File System...
[ 17.324086] systemd[1]: Mounting Kernel Configuration File System...
[ 17.363270] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 17.381744] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 17.406283] systemd[1]: Starting Load/Save Random Seed...
[ 17.460508] systemd[1]: Starting Apply Kernel Variables...
[ 17.519427] systemd[1]: Condition check resulted in Create System Users being skipped.
[ 17.598242] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 17.663260] systemd[1]: Mounted FUSE Control File System.
[ 17.696828] systemd[1]: Mounted Kernel Configuration File System.
[ 18.163114] systemd[1]: Finished Coldplug All udev Devices.
[ 18.268839] systemd[1]: Finished Load/Save Random Seed.
[ 18.320683] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 18.365594] systemd[1]: Finished Apply Kernel Variables.
[ 18.696914] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 18.716942] systemd[1]: Reached target Local File Systems (Pre).
[ 18.736043] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[ 18.766158] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[ 18.840661] systemd[1]: Starting Journal Service...
[ 18.951538] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 20.353627] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 20.438909] audit: type=1130 audit(1612390103.730:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 20.540635] systemd[1]: Starting Network Service...
[ 20.629743] systemd[1]: Started Journal Service.
[ 20.699488] audit: type=1130 audit(1612390103.990:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.031285] zram0: detected capacity change from 0 to 991952896
[ 21.163911] systemd-journald[183]: Received client request to flush runtime journal.
[ 21.224836] systemd-journald[183]: File /var/log/journal/3e62d8658bc541d9b0157f4f87d87854/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 23.615080] Adding 968700k swap on /dev/zram0. Priority:-2 extents:1 across:968700k SSFS
[ 24.029797] audit: type=1130 audit(1612390107.320:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 24.132810] audit: type=1130 audit(1612390107.410:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 26.375282] mc: Linux media interface: v0.10
[ 26.420151] bcm2835-rng 20104000.rng: hwrng registered
[ 27.208759] videodev: Linux video capture interface: v2.00
[ 28.430340] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 28.482142] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 28.590754] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 28.975938] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 29.020244] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 29.155342] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 29.448554] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)
[ 29.482711] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)
[ 29.604163] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)
[ 30.184247] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 30.577758] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 30.719869] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 31.384338] debugfs: Directory '20902000.hdmi' with parent 'vc4-hdmi' already present!
[ 32.048476] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 32.118609] usbcore: registered new interface driver brcmfmac
[ 32.225587] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 32.248075] vc4-drm soc:gpu: bound 20902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 32.329575] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2
[ 32.577103] audit: type=1130 audit(1612390115.860:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 32.810911] vc4-drm soc:gpu: bound 20806000.vec (ops vc4_vec_ops [vc4])
[ 32.811297] vc4-drm soc:gpu: bound 20400000.hvs (ops vc4_hvs_ops [vc4])
[ 32.811949] vc4-drm soc:gpu: bound 20004000.txp (ops vc4_txp_ops [vc4])
[ 32.812464] vc4-drm soc:gpu: bound 20206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 32.813046] vc4-drm soc:gpu: bound 20207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 32.813553] vc4-drm soc:gpu: bound 20807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 32.814010] vc4-drm soc:gpu: bound 20c00000.v3d (ops vc4_v3d_ops [vc4])
[ 32.815226] checking generic (1f5ff000 3fc000) vs hw (0 ffffffff)
[ 32.815236] fb0: switching to vc4drmfb from simple
[ 33.060504] audit: type=1127 audit(1612390116.350:7): pid=218 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 33.153879] zram: Cannot change disksize for initialized device
[ 33.363695] Console: switching to colour dummy device 80x30
[ 33.418315] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ 33.709820] audit: type=1130 audit(1612390117.000:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 33.836860] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 34.539936] Console: switching to colour frame buffer device 240x67
[ 35.078240] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device
[ 35.853484] audit: type=1130 audit(1613738064.902:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 36.177867] audit: type=1130 audit(1613738065.222:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 36.429488] audit: type=1334 audit(1613738065.482:11): prog-id=7 op=LOAD
[ 36.473636] audit: type=1334 audit(1613738065.492:12): prog-id=8 op=LOAD
[ 36.913741] 8021q: 802.1Q VLAN Support v1.8
[ 36.983936] audit: type=1130 audit(1613738066.032:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpcd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 37.276739] audit: type=1130 audit(1613738066.322:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 37.484518] audit: type=1130 audit(1613738066.532:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 38.166115] audit: type=1130 audit(1613738067.212:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 38.302324] audit: type=1130 audit(1613738067.342:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 38.508292] audit: type=1130 audit(1613738067.542:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=serial-getty@ttyAMA0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 38.923178] audit: type=1131 audit(1613738067.972:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 39.076157] audit: type=1130 audit(1613738068.122:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pihole-FTL comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 39.681007] audit: type=1130 audit(1613738068.732:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 46.698579] audit: type=1100 audit(1613738075.752:22): pid=240 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="alarm" exe="/usr/bin/login" hostname=nikita addr=? terminal=/dev/tty1 res=success'
[ 46.799207] audit: type=1101 audit(1613738075.812:23): pid=240 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="alarm" exe="/usr/bin/login" hostname=nikita addr=? terminal=/dev/tty1 res=success'
[ 46.892377] audit: type=1103 audit(1613738075.842:24): pid=240 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="alarm" exe="/usr/bin/login" hostname=nikita addr=? terminal=/dev/tty1 res=success'
[ 46.978237] audit: type=1006 audit(1613738075.842:25): pid=240 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 47.410577] audit: type=1130 audit(1613738076.462:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 47.707832] audit: type=1101 audit(1613738076.752:27): pid=260 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="alarm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 47.798597] audit: type=1103 audit(1613738076.792:28): pid=260 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="alarm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 47.858402] audit: type=1006 audit(1613738076.792:29): pid=260 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 47.918720] audit: type=1105 audit(1613738076.822:30): pid=260 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="alarm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 48.101325] audit: type=1334 audit(1613738077.152:31): prog-id=9 op=LOAD
[ 49.571122] systemd-journald[183]: File /var/log/journal/3e62d8658bc541d9b0157f4f87d87854/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.')

[gdr01]

Perhaps this will help the bug fixers.
My new RPI is zero not loading the firmware to create wlan0, (using latest Archarm)
I know it works as I tested with RasbianOS.
If I add a wifi dongle the
this is output from grep of dmesg for firmware
the rtl8192cu is my added wifi dongle -- edimax
#
[Fri Feb 19 09:44:13 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-16T14:19:28, variant start
[Fri Feb 19 09:44:13 2021] raspberrypi-firmware soc:firmware: Firmware hash is d6d82cf99bcb3e9a166a34cfde53130957a36bd3
[Fri Feb 19 09:44:44 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[Fri Feb 19 09:44:44 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2

[Fri Feb 19 09:44:52 2021] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
immediately creates s wlan0 device and works OK.
I found this in dmesg

I think there is a typo in the file name somewhere.

[keithspg]

I usually wait these big show stoppers out, but started pulling on the thread tonight. The suggestion of downdraging the firmware from @graysky fixed my Pi3b, but my zero is still wireless-less.
dmesg shows this:
$this->bbcode_second_pass_code('', '[ 23.287292] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
[ 23.287452] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2
[ 24.291505] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50')
and ifconfig wlan0 up shows no interface
$this->bbcode_second_pass_code('', '# ifconfig wlan0 up
wlan0: ERROR while getting interface flags: No such device
~# uname -r
5.10.16-3-ARCH
')
Any ideas?

[SpectralMemories]

Same on the Pi0w, but this time with the firmware-raspberrypi package. I updated them one by one until I lost wlan0, and it broke at this package in particular

[graysky]

$this->bbcode_second_pass_quote('Synch', 'U')nfortunately, the new firmware-raspberrypi doesn't work with the latest linux-firmware on my RPi0. It fact, it doesn't work with the previous linux-firmware, either!

[dpj]

Raspberry Pi 3 Model B

ArchLinuxARM-rpi-4-latest.tar.gz

just installed and updated:

$this->bbcode_second_pass_code('', '
[alarm@alarmpi ~]$ pacman -Q linux-raspberrypi4 linux-firmware firmware-raspberrypi
linux-raspberrypi4 5.10.16-3
linux-firmware 20210208.b79d239-1
firmware-raspberrypi 20210218-1
')

appears to be working:

$this->bbcode_second_pass_code('', '
[ 14.117428] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 14.134302] audit: type=1130 audit(1612389090.179:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.159216] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Feb 16 2020 22:39:24 version 7.45.98.97 (r724416 CY) FWID 01-bf41ed64
')



ArchLinuxARM-rpi-aarch64-latest.tar.gz


after full system upgrade:

$this->bbcode_second_pass_code('', '
[alarm@alarm ~]$ pacman -Q linux-aarch64 firmware-raspberrypi linux-firmware
linux-aarch64 5.11.0-1
firmware-raspberrypi 20210218-1
linux-firmware 20210208.b79d239-1
')

not working:

$this->bbcode_second_pass_code('', '
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.11.0-1-ARCH (builduser@leming) (aarch64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP Wed Feb 17 18:45:38 MST 2021
[ 0.000000] Machine model: Raspberry Pi 3 Model B
-->%--
[ 12.948641] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
-->%--
[ 13.323896] ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed
[ 13.332643] ------------[ cut here ]------------
[ 13.338827] WARNING: CPU: 2 PID: 79 at kernel/workqueue.c:1480 __queue_work+0x2f4/0x380
[ 13.348478] Modules linked in: brcmfmac brcmutil rc_cec vc4 smsc hci_uart bcm2835_v4l2(C) cec cfg80211 btqca btbcm rc_core smsc95xx btintel bcm2835_mmal_vchiq(C) drm_kms_helper usbnet videobuf2_vmalloc mii videobuf2_memops bluetooth syscopyarea videobuf2_v4l2 sysfillrect videobuf2_common sysimgblt fb_sys_fops videodev ecdh_generic mc ecc rfkill raspberrypi_hwmon i2c_bcm2835 snd_bcm2835(C) bcm2835_thermal pwm_bcm2835 bcm2835_wdt fuse drm
[ 13.395577] CPU: 2 PID: 79 Comm: kworker/u8:1 Tainted: G C 5.11.0-1-ARCH #1
[ 13.407182] Hardware name: Raspberry Pi 3 Model B (DT)
[ 13.407190] Workqueue: brcmf_wq/mmc1:0001:1 brcmf_sdio_dataworker [brcmfmac]
[ 13.422784] pstate: 00000085 (nzcv daIf -PAN -UAO -TCO BTYPE=--)
[ 13.422792] pc : __queue_work+0x2f4/0x380
[ 13.422805] lr : __queue_work+0x340/0x380
[ 13.422812] sp : ffff800012aebc40
[ 13.422815] x29: ffff800012aebc40 x28: 0000000000000008
[ 13.422824] x27: ffff8000118c9000 x26: ffff800011cfecb8
[ 13.422832] x25: ffff8000118c9000 x24: 0000000000000002
[ 13.422839] x23: 0000000000000006 x22: ffff000002409c00
[ 13.422847] x21: ffff0000371b71c0 x20: ffff0000371e8f00
[ 13.422854] x19: ffff0000057776c8 x18: 0000000000000030
[ 13.482488] x17: 0000000000000000 x16: 0000000000000000
[ 13.482496] x15: ffff0000039a84f0 x14: ffff800011d19230
[ 13.495932] x13: 0000000000000000 x12: 0000000000000040
[ 13.495940] x11: ffff000002803908 x10: ffff00000280390a
[ 13.495948] x9 : ffff800011d16248 x8 : ffff000002803930
[ 13.495955] x7 : 0000000000000000 x6 : ffff000002803928
[ 13.495962] x5 : ffff000002803908 x4 : 0000000000000000
[ 13.495970] x3 : ffff0000371e51c0 x2 : 0000000000000001
[ 13.495977] x1 : 0000000000000000 x0 : ffff0000057776d0
[ 13.495985] Call trace:
[ 13.495989] __queue_work+0x2f4/0x380
[ 13.495998] queue_work_on+0x54/0x80
[ 13.496006] brcmf_fw_crashed+0x38/0x70 [brcmfmac]
[ 13.496060] brcmf_sdio_hostmail+0x15c/0x1d4 [brcmfmac]
[ 13.496114] brcmf_sdio_dpc+0x2d4/0x590 [brcmfmac]
[ 13.496168] brcmf_sdio_dataworker+0x3c/0xa0 [brcmfmac]
[ 13.496222] process_one_work+0x1c4/0x3a0
[ 13.496232] worker_thread+0x178/0x400
[ 13.496240] kthread+0x10c/0x110
[ 13.496247] ret_from_fork+0x10/0x38
[ 13.496256] ---[ end trace 2775f4f26e970cd4 ]---
')

am happy to use the ArchLinuxARM-rpi-4-latest.tar.gz (perhaps always should have been?), info above is in case it helps.