by arti74 » Wed May 09, 2018 9:02 pm
After changing for the new uImage (md5sum 2f39f05a43bf3556a67749487893a0ef)
$this->bbcode_second_pass_code('', 'cat /proc/device-tree/chosen/bootargs
console=ttyS0,115200=mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/sda2 rw rootwait loglevel=8')
$this->bbcode_second_pass_code('', '[rtorrent@alarm ~]$ mtdinfo /dev/mtd0
mtd0
Name: uboot
Type: nand
Eraseblock size: 131072 bytes, 128.0 KiB
Amount of eraseblocks: 8 (1048576 bytes, 1024.0 KiB)
Minimum input/output unit size: 2048 bytes
Sub-page size: 512 bytes
OOB size: 64 bytes
Character device major/minor: 90:0
Bad blocks are allowed: true
Device is writable: false')
Maybe I should do this dts change on my own device? If it could change anything.. (then I would need more step by step directions...)