[lxde] Raspberrypi 3b+, lxde crash very much times

Problems with packages? Post here, using [tags] of the package name.

[lxde] Raspberrypi 3b+, lxde crash very much times

Postby PowaBanga » Mon Aug 27, 2018 9:55 am

Hello,
I installed archarm on my raspberrypi 3b+ armv7's mSD card.

So globaly, archlinux run really good, but lxde crash very very much times.

Systematicly when i change the resolution, sometime when i launch retroarch, very much time when i unlock the screen...

so the behavior is, that the screen is displayed, i can move my mousse, but there is no answer when i click anywhere. After 10 minutes, the screen is locked, and it can't unlock the screen when i click with my mouse.


here is Xorg.0.log

$this->bbcode_second_pass_code('', '[ 15.066]
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
[ 15.066] Build Operating System: Linux Arch Linux
[ 15.066] Current Operating System: Linux RaspberryPi 4.18.5-1-ARCH #1 SMP Fri Aug 24 18:33:45 MDT 2018 aarch64
[ 15.067] Kernel command line: console=ttyS1,115200 console=tty0 root=PARTUUID=eb710f1d-02 rw rootwait smsc95xx.macaddr=b8:27:eb:ee:f2:97
[ 15.067] Build Date: 17 August 2018 02:00:39AM
[ 15.067]
[ 15.067] Current version of pixman: 0.34.0
[ 15.067] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.067] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.068] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 27 01:23:01 2018
[ 15.078] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.078] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.081] (==) No Layout section. Using the first Screen section.
[ 15.081] (==) No screen section available. Using defaults.
[ 15.081] (**) |-->Screen "Default Screen Section" (0)
[ 15.081] (**) | |-->Monitor "<default monitor>"
[ 15.082] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.083] (==) Automatically adding devices
[ 15.083] (==) Automatically enabling devices
[ 15.083] (==) Automatically adding GPU devices
[ 15.083] (==) Automatically binding GPU devices
[ 15.083] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 15.091] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 15.091] Entry deleted from font path.
[ 15.091] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 15.091] Entry deleted from font path.
[ 15.091] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 15.091] Entry deleted from font path.
[ 15.091] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 15.091] Entry deleted from font path.
[ 15.091] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 15.091] Entry deleted from font path.
[ 15.091] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 15.091] Entry deleted from font path.
[ 15.091] (==) FontPath set to:

[ 15.091] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.091] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.091] (II) Module ABI versions:
[ 15.091] X.Org ANSI C Emulation: 0.4
[ 15.092] X.Org Video Driver: 24.0
[ 15.092] X.Org XInput driver : 24.1
[ 15.092] X.Org Server Extension : 10.0
[ 15.094] (++) using VT number 1

[ 15.095] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 15.098] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.107] (II) no primary bus or device found
[ 15.107] falling back to /sys/devices/platform/soc/soc:gpu/drm/card0
[ 15.107] (II) LoadModule: "glx"
[ 15.112] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.250] (II) Module glx: vendor="X.Org Foundation"
[ 15.250] compiled for 1.20.1, module version = 1.0.0
[ 15.250] ABI class: X.Org Server Extension, version 10.0
[ 15.250] (==) Matched modesetting as autoconfigured driver 0
[ 15.251] (==) Matched fbdev as autoconfigured driver 1
[ 15.251] (==) Assigned the driver to the xf86ConfigLayout
[ 15.251] (II) LoadModule: "modesetting"
[ 15.251] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 15.270] (II) Module modesetting: vendor="X.Org Foundation"
[ 15.270] compiled for 1.20.1, module version = 1.20.1
[ 15.270] Module class: X.Org Video Driver
[ 15.270] ABI class: X.Org Video Driver, version 24.0
[ 15.270] (II) LoadModule: "fbdev"
[ 15.271] (WW) Warning, couldn't open module fbdev
[ 15.271] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 15.271] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 15.273] (II) modeset(0): using drv /dev/dri/card0
[ 15.274] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.274] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 15.274] (==) modeset(0): RGB weight 888
[ 15.274] (==) modeset(0): Default visual is TrueColor
[ 15.274] (II) Loading sub module "glamoregl"
[ 15.275] (II) LoadModule: "glamoregl"
[ 15.275] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 15.352] (II) Module glamoregl: vendor="X.Org Foundation"
[ 15.353] compiled for 1.20.1, module version = 1.0.1
[ 15.353] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.362] (II) modeset(0): glamor X acceleration enabled on VC4 V3D 2.1
[ 17.362] (II) modeset(0): glamor initialized
[ 17.388] (II) modeset(0): Output HDMI-1 has no monitor section
[ 17.388] (II) modeset(0): Output Composite-1 has no monitor section
[ 17.417] (II) modeset(0): EDID for output HDMI-1
[ 17.417] (II) modeset(0): Manufacturer: SAM Model: d4d Serial#: 0
[ 17.417] (II) modeset(0): Year: 2016 Week: 1
[ 17.417] (II) modeset(0): EDID Version: 1.3
[ 17.417] (II) modeset(0): Digital Display Input
[ 17.417] (II) modeset(0): Max Image Size [cm]: horiz.: 70 vert.: 39
[ 17.417] (II) modeset(0): Gamma: 2.20
[ 17.417] (II) modeset(0): No DPMS capabilities specified
[ 17.417] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 17.417] (II) modeset(0): First detailed timing is preferred mode
[ 17.418] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 17.418] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 17.418] (II) modeset(0): Supported established timings:
[ 17.418] (II) modeset(0): 720x400@70Hz
[ 17.418] (II) modeset(0): 640x480@60Hz
[ 17.418] (II) modeset(0): 640x480@67Hz
[ 17.418] (II) modeset(0): 640x480@72Hz
[ 17.418] (II) modeset(0): 640x480@75Hz
[ 17.418] (II) modeset(0): 800x600@60Hz
[ 17.418] (II) modeset(0): 800x600@72Hz
[ 17.418] (II) modeset(0): 800x600@75Hz
[ 17.418] (II) modeset(0): 832x624@75Hz
[ 17.418] (II) modeset(0): 1024x768@60Hz
[ 17.418] (II) modeset(0): 1024x768@70Hz
[ 17.418] (II) modeset(0): 1024x768@75Hz
[ 17.418] (II) modeset(0): Manufacturer's mask: 0
[ 17.418] (II) modeset(0): Supported standard timings:
[ 17.418] (II) modeset(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 17.418] (II) modeset(0): Supported detailed timing:
[ 17.418] (II) modeset(0): clock: 85.5 MHz Image Size: 609 x 347 mm
[ 17.418] (II) modeset(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 17.419] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 17.419] (II) modeset(0): Supported detailed timing:
[ 17.419] (II) modeset(0): clock: 74.2 MHz Image Size: 609 x 347 mm
[ 17.419] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 17.419] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 17.419] (II) modeset(0): Ranges: V min: 24 V max: 75 Hz, H min: 15 H max: 68 kHz, PixClock max 235 MHz
[ 17.419] (II) modeset(0): Monitor name: SAMSUNG
[ 17.419] (II) modeset(0): Supported detailed timing:
[ 17.419] (II) modeset(0): clock: 74.2 MHz Image Size: 609 x 347 mm
[ 17.419] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 17.419] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 17.419] (II) modeset(0): Supported detailed timing:
[ 17.419] (II) modeset(0): clock: 74.2 MHz Image Size: 609 x 347 mm
[ 17.419] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 17.419] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 17.419] (II) modeset(0): Supported detailed timing:
[ 17.420] (II) modeset(0): clock: 85.5 MHz Image Size: 609 x 347 mm
[ 17.420] (II) modeset(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 17.420] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 17.420] (II) modeset(0): Supported detailed timing:
[ 17.420] (II) modeset(0): clock: 85.5 MHz Image Size: 609 x 347 mm
[ 17.420] (II) modeset(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 17.420] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 17.420] (II) modeset(0): Number of EDID sections to follow: 1
[ 17.420] (II) modeset(0): EDID (in hex):
[ 17.420] (II) modeset(0): 00ffffffffffff004c2d4d0d00000000
[ 17.420] (II) modeset(0): 011a0103804627780aee91a3544c9926
[ 17.420] (II) modeset(0): 0f5054bdee0081c00101010101010101
[ 17.420] (II) modeset(0): 010101010101662156aa51001e30468f
[ 17.420] (II) modeset(0): 3300615b2100001e011d007251d01e20
[ 17.420] (II) modeset(0): 6e285500615b2100001e000000fd0018
[ 17.421] (II) modeset(0): 4b0f4417000a202020202020000000fc
[ 17.421] (II) modeset(0): 0053414d53554e470a20202020200120
[ 17.421] (II) modeset(0): 02032bf14d841305140312101f202122
[ 17.421] (II) modeset(0): 0716290907071507503d04c083010000
[ 17.421] (II) modeset(0): e2000f67030c002000b82d011d80d072
[ 17.421] (II) modeset(0): 1c1620102c2580615b2100009e011d80
[ 17.421] (II) modeset(0): 18711c1620582c2500615b2100009e66
[ 17.421] (II) modeset(0): 2156aa51001e30468f3300615b210000
[ 17.421] (II) modeset(0): 1e662150b051001b3040703600615b21
[ 17.421] (II) modeset(0): 00001e00000000000000000000000029
[ 17.421] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[ 17.422] (II) modeset(0): Printing probed modes for output HDMI-1
[ 17.422] (II) modeset(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 17.422] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[ 17.422] (II) modeset(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 17.423] (II) modeset(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 17.423] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17.423] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17.423] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 17.423] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17.423] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 17.423] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 17.423] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17.423] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17.423] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 17.423] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17.423] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17.423] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 17.423] (II) modeset(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 17.423] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 17.423] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 17.424] (II) modeset(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 17.424] (II) modeset(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 17.424] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17.424] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 17.424] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 17.424] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17.424] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17.424] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17.424] (II) modeset(0): EDID for output Composite-1
[ 17.424] (II) modeset(0): Printing probed modes for output Composite-1
[ 17.424] (II) modeset(0): Modeline "720x480"x31.3 13.50 720 734 798 858 480 483 486 502 interlace (15.7 kHz e)
[ 17.424] (II) modeset(0): Output HDMI-1 connected
[ 17.424] (II) modeset(0): Output Composite-1 disconnected
[ 17.425] (II) modeset(0): Using exact sizes for initial modes
[ 17.425] (II) modeset(0): Output HDMI-1 using initial mode 1366x768 +0+0
[ 17.425] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.425] (==) modeset(0): DPI set to (96, 96)
[ 17.425] (II) Loading sub module "fb"
[ 17.425] (II) LoadModule: "fb"
[ 17.425] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.434] (II) Module fb: vendor="X.Org Foundation"
[ 17.434] compiled for 1.20.1, module version = 1.0.0
[ 17.434] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.897] (==) modeset(0): Backing store enabled
[ 17.898] (==) modeset(0): Silken mouse disabled
[ 17.916] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 17.917] (==) modeset(0): DPMS enabled
[ 17.918] (II) modeset(0): [DRI2] Setup complete
[ 17.918] (II) modeset(0): [DRI2] DRI driver: vc4
[ 17.919] (II) modeset(0): [DRI2] VDPAU driver: vc4
[ 17.919] (II) Initializing extension Generic Event Extension
[ 17.920] (II) Initializing extension SHAPE
[ 17.921] (II) Initializing extension MIT-SHM
[ 17.922] (II) Initializing extension XInputExtension
[ 17.929] (II) Initializing extension XTEST
[ 17.930] (II) Initializing extension BIG-REQUESTS
[ 17.931] (II) Initializing extension SYNC
[ 17.932] (II) Initializing extension XKEYBOARD
[ 17.934] (II) Initializing extension XC-MISC
[ 17.935] (II) Initializing extension SECURITY
[ 17.936] (II) Initializing extension XFIXES
[ 17.937] (II) Initializing extension RENDER
[ 17.938] (II) Initializing extension RANDR
[ 17.941] (II) Initializing extension COMPOSITE
[ 17.942] (II) Initializing extension DAMAGE
[ 17.943] (II) Initializing extension MIT-SCREEN-SAVER
[ 17.944] (II) Initializing extension DOUBLE-BUFFER
[ 17.945] (II) Initializing extension RECORD
[ 17.946] (II) Initializing extension DPMS
[ 17.948] (II) Initializing extension Present
[ 17.949] (II) Initializing extension DRI3
[ 17.950] (II) Initializing extension X-Resource
[ 17.951] (II) Initializing extension XVideo
[ 17.952] (II) Initializing extension XVideo-MotionCompensation
[ 17.952] (II) Initializing extension GLX
[ 17.971] (II) AIGLX: Loaded and initialized vc4
[ 17.971] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 17.971] (II) Initializing extension XFree86-VidModeExtension
[ 17.972] (II) Initializing extension XFree86-DGA
[ 17.973] (II) Initializing extension XFree86-DRI
[ 17.973] (II) Initializing extension DRI2
[ 17.983] (II) modeset(0): Damage tracking initialized
[ 17.983] (II) modeset(0): Setting screen physical size to 361 x 203
[ 18.399] (II) config/udev: Adding input device RC for vc4 (/dev/input/event2)
[ 18.400] (**) RC for vc4: Applying InputClass "libinput keyboard catchall"
[ 18.400] (**) RC for vc4: Applying InputClass "system-keyboard"
[ 18.400] (II) LoadModule: "libinput"
[ 18.400] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 18.441] (II) Module libinput: vendor="X.Org Foundation"
[ 18.441] compiled for 1.20.0, module version = 0.28.0
[ 18.442] Module class: X.Org XInput Driver
[ 18.442] ABI class: X.Org XInput driver, version 24.1
[ 18.442] (II) Using input driver 'libinput' for 'RC for vc4'
[ 18.442] (**) RC for vc4: always reports core events
[ 18.442] (**) Option "Device" "/dev/input/event2"
[ 18.442] (**) Option "_source" "server/udev"
[ 18.445] (II) event2 - RC for vc4: is tagged by udev as: Keyboard
[ 18.445] (II) event2 - RC for vc4: device is a keyboard
[ 18.445] (II) event2 - RC for vc4: device removed
[ 18.490] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f902000.hdmi/rc/rc0/input2/event2"
[ 18.490] (II) XINPUT: Adding extended input device "RC for vc4" (type: KEYBOARD, id 6)
[ 18.490] (**) Option "xkb_layout" "be,us"
[ 18.490] (**) Option "xkb_variant" ","
[ 18.649] (II) event2 - RC for vc4: is tagged by udev as: Keyboard
[ 18.649] (II) event2 - RC for vc4: device is a keyboard
[ 18.655] (II) config/udev: Adding input device SHANWAN PS3 GamePad (/dev/input/event1)
[ 18.655] (II) No input driver specified, ignoring this device.
[ 18.655] (II) This device may have been added with another device file.
[ 18.660] (II) config/udev: Adding input device SHANWAN PS3 GamePad (/dev/input/js0)
[ 18.660] (II) No input driver specified, ignoring this device.
[ 18.660] (II) This device may have been added with another device file.
[ 18.665] (II) config/udev: Adding input device SHANWAN PS3 GamePad Motion Sensors (/dev/input/event0)
[ 18.665] (II) No input driver specified, ignoring this device.
[ 18.665] (II) This device may have been added with another device file.
[ 21.365] (II) modeset(0): Disabling kernel dirty updates, not required.
[ 94.945] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4008 (/dev/input/mouse0)
[ 94.945] (II) No input driver specified, ignoring this device.
[ 94.945] (II) This device may have been added with another device file.
[ 95.273] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4004 (/dev/input/event4)
[ 95.274] (**) Logitech Unifying Device. Wireless PID:4004: Applying InputClass "libinput keyboard catchall"
[ 95.274] (**) Logitech Unifying Device. Wireless PID:4004: Applying InputClass "system-keyboard"
[ 95.274] (II) Using input driver 'libinput' for 'Logitech Unifying Device. Wireless PID:4004'
[ 95.274] (**) Logitech Unifying Device. Wireless PID:4004: always reports core events
[ 95.274] (**) Option "Device" "/dev/input/event4"
[ 95.274] (**) Option "_source" "server/udev"
[ 95.278] (II) event4 - Logitech Unifying Device. Wireless PID:4004: is tagged by udev as: Keyboard
[ 95.278] (II) event4 - Logitech Unifying Device. Wireless PID:4004: device is a keyboard
[ 95.278] (II) event4 - Logitech Unifying Device. Wireless PID:4004: device removed
[ 95.320] (II) libinput: Logitech Unifying Device. Wireless PID:4004: needs a virtual subdevice
[ 95.320] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input16/event4"
[ 95.320] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4004" (type: MOUSE, id 7)
[ 95.321] (**) Option "AccelerationScheme" "none"
[ 95.321] (**) Logitech Unifying Device. Wireless PID:4004: (accel) selected scheme none/0
[ 95.321] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration factor: 2.000
[ 95.321] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration threshold: 4
[ 95.325] (II) event4 - Logitech Unifying Device. Wireless PID:4004: is tagged by udev as: Keyboard
[ 95.325] (II) event4 - Logitech Unifying Device. Wireless PID:4004: device is a keyboard
[ 95.326] (**) Logitech Unifying Device. Wireless PID:4004: Applying InputClass "libinput keyboard catchall"
[ 95.326] (**) Logitech Unifying Device. Wireless PID:4004: Applying InputClass "system-keyboard"
[ 95.326] (II) Using input driver 'libinput' for 'Logitech Unifying Device. Wireless PID:4004'
[ 95.326] (**) Logitech Unifying Device. Wireless PID:4004: always reports core events
[ 95.326] (**) Option "Device" "/dev/input/event4"
[ 95.326] (**) Option "_source" "_driver/libinput"
[ 95.326] (II) libinput: Logitech Unifying Device. Wireless PID:4004: is a virtual subdevice
[ 95.326] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/0003:046D:4004.0005/input/input16/event4"
[ 95.326] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4004" (type: KEYBOARD, id 8)
[ 95.326] (**) Option "xkb_layout" "be,us"
[ 95.326] (**) Option "xkb_variant" ","
[ 95.332] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4008 (/dev/input/event3)
[ 95.332] (**) Logitech Unifying Device. Wireless PID:4008: Applying InputClass "libinput pointer catchall"
[ 95.333] (II) Using input driver 'libinput' for 'Logitech Unifying Device. Wireless PID:4008'
[ 95.333] (**) Logitech Unifying Device. Wireless PID:4008: always reports core events
[ 95.333] (**) Option "Device" "/dev/input/event3"
[ 95.333] (**) Option "_source" "server/udev"
[ 95.336] (II) event3 - Logitech Unifying Device. Wireless PID:4008: is tagged by udev as: Mouse
[ 95.336] (II) event3 - Logitech Unifying Device. Wireless PID:4008: device is a pointer
[ 95.336] (II) event3 - Logitech Unifying Device. Wireless PID:4008: device removed
[ 95.450] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/0003:046D:4008.0006/input/input15/event3"
[ 95.450] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4008" (type: MOUSE, id 9)
[ 95.451] (**) Option "AccelerationScheme" "none"
[ 95.451] (**) Logitech Unifying Device. Wireless PID:4008: (accel) selected scheme none/0
[ 95.451] (**) Logitech Unifying Device. Wireless PID:4008: (accel) acceleration factor: 2.000
[ 95.451] (**) Logitech Unifying Device. Wireless PID:4008: (accel) acceleration threshold: 4
[ 95.455] (II) event3 - Logitech Unifying Device. Wireless PID:4008: is tagged by udev as: Mouse
[ 95.455] (II) event3 - Logitech Unifying Device. Wireless PID:4008: device is a pointer
[ 104.507] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101f (/dev/input/mouse1)
[ 104.508] (II) No input driver specified, ignoring this device.
[ 104.508] (II) This device may have been added with another device file.
[ 104.678] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101f (/dev/input/event5)
[ 104.678] (**) Logitech Unifying Device. Wireless PID:101f: Applying InputClass "libinput pointer catchall"
[ 104.678] (II) Using input driver 'libinput' for 'Logitech Unifying Device. Wireless PID:101f'
[ 104.678] (**) Logitech Unifying Device. Wireless PID:101f: always reports core events
[ 104.678] (**) Option "Device" "/dev/input/event5"
[ 104.678] (**) Option "_source" "server/udev"
[ 104.682] (II) event5 - Logitech Unifying Device. Wireless PID:101f: is tagged by udev as: Mouse
[ 104.682] (II) event5 - Logitech Unifying Device. Wireless PID:101f: device is a pointer
[ 104.682] (II) event5 - Logitech Unifying Device. Wireless PID:101f: device removed
[ 104.770] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0004/0003:046D:101F.0007/input/input17/event5"
[ 104.770] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101f" (type: MOUSE, id 10)
[ 104.771] (**) Option "AccelerationScheme" "none"
[ 104.771] (**) Logitech Unifying Device. Wireless PID:101f: (accel) selected scheme none/0
[ 104.771] (**) Logitech Unifying Device. Wireless PID:101f: (accel) acceleration factor: 2.000
[ 104.771] (**) Logitech Unifying Device. Wireless PID:101f: (accel) acceleration threshold: 4
[ 104.775] (II) event5 - Logitech Unifying Device. Wireless PID:101f: is tagged by udev as: Mouse
[ 104.775] (II) event5 - Logitech Unifying Device. Wireless PID:101f: device is a pointer
[ 199.814] (EE) client bug: timer event3 debounce short: offset negative (-6ms)
[ 1324.895] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:4004
[ 1324.899] (II) UnloadModule: "libinput"
[ 1324.899] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:4004
[ 1324.900] (II) event4 - Logitech Unifying Device. Wireless PID:4004: device removed
[ 1324.961] (II) UnloadModule: "libinput"
[ 1325.039] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:4008
[ 1325.040] (II) event3 - Logitech Unifying Device. Wireless PID:4008: device removed
[ 1325.094] (II) UnloadModule: "libinput"
[ 1325.136] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:101f
[ 1325.137] (II) event5 - Logitech Unifying Device. Wireless PID:101f: device removed
[ 1325.184] (II) UnloadModule: "libinput"')

If somebody can help me, it will be really good.
thanks :)
PowaBanga
 
Posts: 15
Joined: Thu May 31, 2018 2:04 pm

Re: [lxde] Raspberrypi 3b+, lxde crash very much times

Postby TheSaint » Mon Aug 27, 2018 12:08 pm

You might try without the logitech thingy, to see if the situation will improve.
Beside that, have noted some error in the journal ?
TheSaint
 
Posts: 346
Joined: Mon Jul 23, 2018 7:57 am

Re: [lxde] Raspberrypi 3b+, lxde crash very much times

Postby PowaBanga » Mon Aug 27, 2018 7:12 pm

The logitech device are my keyboard and my mouse ^^ I can't do anything without.

Finaly i Installed xf86-video-fbturbo-git , i seem that I haven't crash anymore with that, but retroarch is very very laggy with it ... :roll:
PowaBanga
 
Posts: 15
Joined: Thu May 31, 2018 2:04 pm


Return to Packages

Who is online

Users browsing this forum: No registered users and 14 guests