Kodi-rpi-19.0-3 update

[foobar]

Hi, just updated my system and noticed the following:

$this->bbcode_second_pass_code('', '
..
2/6) upgrading kodi-rpi [######################] 100%
-> Remove any tweaks made to /boot/config.txt now!
-> This includes lines such as gpu_mem=...
-> Add the following to /boot/config.txt or else kodi will not work.
[all]
include kodi.config.txt
(3/6) upgrading kodi-rpi-legacy-dev
..
')

I commented out everthing in /boot/config.txt and added above, now before Kodi starts (after auto login) I see dozens of the following lines:

$this->bbcode_second_pass_code('', '
..
Feb 23 14:01:35 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:35 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:36 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:36 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:37 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:37 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:38 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:38 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:39 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:39 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:40 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
Feb 23 14:01:40 PC19 kernel: vc4_hdmi fef00700.hdmi: ASoC: error at snd_soc_dai_startup on fef00700.hdmi: -19
..
')

Kodi starts and seems to be working. What are thes lines saying and why cannot I have customizations in /boot/config.txt anymore?

[graysky]

Normal. See: https://forum.kodi.tv/showthread.php?tid=355931 and links therein.

[foobar]

That's clear but what about my last question. There's now a kodi.config.txt file in boot:

$this->bbcode_second_pass_code('', '
dtoverlay=vc4-kms-v3d,cma-512
dtoverlay=rpivid-v4l2
disable_overscan=1
disable_fw_kms_setup=1
')

but my (now commented out) config.txt is:

$this->bbcode_second_pass_code('', '
# See /boot/overlays/README for all available options

[all]
include kodi.config.txt

#gpu_mem=320
#initramfs initramfs-linux.img followkernel
#temp_limit=70

#hdmi_enable_4kp60=1
#hdmi_edid_file=1
#hdmi_group=2
#hdmi_mode=87
#hdmi_cvt 1920 1080 60 3 0 0 1
#max_framebuffer_width=1920
#max_framebuffer_height=1080

#dtoverlay=vc4-fkms-v3d
#dtparam=audio=on
#audio_pwm_mode=2
#dtparam=spi=on
#dtoverlay=disable-wifi
#dtoverlay=disable-bt
')

So , apart from gpu_mem, are there any of these which might give problems with this new kodi config setup?

[graysky]

$this->bbcode_second_pass_quote('foobar', 'S')o , apart from gpu_mem, are there any of these which might give problems with this new kodi config setup?

[foobar]

The hdmi settings are for my 4k monitor which obviously is not running at 4k at the moment, I use the edid file because on reboot my pi starts kodi but my monitor is still off and is activated with the remote.

The dtparam=audio=on and audio_pwm_mode=2 are used on previous kodi versions for various reasons but maybe not needed anymore with this kod version. Have to test later.

The dtparam=spi=on is for my hyperion.ng ambilight which is, amongst my tvheadend client, not working on kodi 19 (probably lack of python 3) so I just have to wait for those to be solved (if ever) but thats not for this forum. For the moment I keep on updating my test setup and see what happens. Thanks so far.