[OFFICIAL] sabnzbd

[WarheadsSE]

Hah. It's not just the oxnas people!

[joecho5]

wow pepedog. Thank you so much! I tried looking for a solution on google for about an hour and found nothing. Thanks for the rescue!

[strato]

$this->bbcode_second_pass_quote('pepedog', 'A')lso ntpd should go after network in DAEMONS

[elk29n]

I have an issue that when a file is downloading, at times, sabnzbd quits and the Dockstar locks up requiring a reboot.
I have the swap file on SATA 1TB HD and the rootfs on a USB Flash 2GB.

Any suggestions?

[elk29n]

Could anyone suggest anything? I've looked around and can't figure out the problem.

The program idles fine but when its downloads a file (4-8GB) it occasionally locks up and requires a restart of the dockstar.

Thanks in advance.

[m0rphU]

Did the latest updates and experienced the initscript has moved to a systemd script... Now I'm missing any chance to start sabnzbd on my Pogo (POGO-B02, oxnas-based)

Is there any chance to get this working on oxnas devices? Seems systemd isn't working there.

[rflores2323]

my pogo plus sabnzbd keep freezing and then I have to restart it.

I am on a pogoplug E02 running sab 0.7.9

see below

$this->bbcode_second_pass_code('', '[root@alarm couchpotato]# systemctl status sabnzbd.service
sabnzbd.service - SABnzbd binary newsreader
Loaded: loaded (/usr/lib/systemd/system/sabnzbd.service; enabled)
Active: failed (Result: signal) since Fri 2013-02-01 17:12:23 CST; 26min ago
Process: 31427 ExecStart=/bin/sh -c python2 /opt/sabnzbd/SABnzbd.py -l0 (code=killed, signal=KILL)

Feb 01 12:37:06 alarm systemd[1]: Starting SABnzbd binary newsreader...
Feb 01 12:37:06 alarm systemd[1]: Started SABnzbd binary newsreader.
Feb 01 12:37:40 alarm sh[31427]: 2013-02-01 12:37:35,822::ERROR::[database:...og
Feb 01 12:37:55 alarm sh[31427]: 2013-02-01 12:37:40,577::ERROR::[database:...og
Feb 01 12:37:55 alarm sh[31427]: 2013-02-01 12:37:47,235::ERROR::[database:...og
Feb 01 12:37:55 alarm sh[31427]: 2013-02-01 12:37:47,238::ERROR::[database:...og
Feb 01 12:38:41 alarm sh[31427]: 2013-02-01 12:38:01,391::ERROR::[database:...og
Feb 01 12:39:22 alarm sh[31427]: 2013-02-01 12:38:04,944::ERROR::[database:...og
Feb 01 17:12:23 alarm systemd[1]: sabnzbd.service: main process exited, cod...LL
Feb 01 17:12:23 alarm systemd[1]: Unit sabnzbd.service entered failed state
[root@alarm couchpotato]# systemctl start sabnzbd.service
[root@alarm couchpotato]# system status sabnzbd.service
-bash: system: command not found
[root@alarm couchpotato]# systemctl status sabnzbd.service
sabnzbd.service - SABnzbd binary newsreader
Loaded: loaded (/usr/lib/systemd/system/sabnzbd.service; enabled)
Active: active (running) since Fri 2013-02-01 17:39:13 CST; 45s ago
Main PID: 3352 (python2)
CGroup: name=systemd:/system/sabnzbd.service
└─3352 python2 /opt/sabnzbd/SABnzbd.py -l0

Feb 01 17:39:13 alarm systemd[1]: Starting SABnzbd binary newsreader...
Feb 01 17:39:13 alarm systemd[1]: Started SABnzbd binary newsreader.
Feb 01 17:40:20 alarm sh[3352]: 2013-02-01 17:40:09,554::ERROR::[database:1...og
[root@alarm couchpotato]# ')

$this->bbcode_second_pass_code('', '2013-02-01 08:42:31,029::INFO::[_cplogging:55] [01/Feb/2013:08:42:31] ENGINE Bus STARTING
2013-02-01 08:42:32,483::INFO::[_cplogging:55] [01/Feb/2013:08:42:32] ENGINE Started monitor thread '_TimeoutMonitor'.
2013-02-01 08:42:32,692::INFO::[_cplogging:55] [01/Feb/2013:08:42:32] ENGINE Serving on 192.168.1.24:8085
2013-02-01 08:42:32,694::INFO::[_cplogging:55] [01/Feb/2013:08:42:32] ENGINE Bus STARTED
2013-02-01 08:42:41,648::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 08:42:47,673::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 08:42:53,139::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 08:42:53,162::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 08:43:00,384::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 08:43:00,387::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 08:43:00,396::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 08:43:00,476::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 12:37:24,212::INFO::[_cplogging:55] [01/Feb/2013:12:37:24] ENGINE Bus STARTING
2013-02-01 12:37:25,648::INFO::[_cplogging:55] [01/Feb/2013:12:37:25] ENGINE Started monitor thread '_TimeoutMonitor'.
2013-02-01 12:37:25,862::INFO::[_cplogging:55] [01/Feb/2013:12:37:25] ENGINE Serving on 192.168.1.24:8085
2013-02-01 12:37:25,864::INFO::[_cplogging:55] [01/Feb/2013:12:37:25] ENGINE Bus STARTED
2013-02-01 12:37:35,822::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 12:37:40,577::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 12:37:47,235::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 12:37:47,238::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 12:38:01,391::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 12:38:04,944::ERROR::[database:111] SQL Command Failed, see log
2013-02-01 17:39:33,501::INFO::[_cplogging:55] [01/Feb/2013:17:39:33] ENGINE Bus STARTING
2013-02-01 17:39:36,448::INFO::[_cplogging:55] [01/Feb/2013:17:39:36] ENGINE Started monitor thread '_TimeoutMonitor'.
2013-02-01 17:39:36,659::INFO::[_cplogging:55] [01/Feb/2013:17:39:36] ENGINE Serving on 192.168.1.24:8085
2013-02-01 17:39:36,661::INFO::[_cplogging:55] [01/Feb/2013:17:39:36] ENGINE Bus STARTED
2013-02-01 17:40:09,554::ERROR::[database:111] SQL Command Failed, see log')

[darkside401]

$this->bbcode_second_pass_quote('m0rphU', 'D')id the latest updates and experienced the initscript has moved to a systemd script... Now I'm missing any chance to start sabnzbd on my Pogo (POGO-B02, oxnas-based)

Is there any chance to get this working on oxnas devices? Seems systemd isn't working there.

[sjwoo]

Hey folks,

For some reason, I just can't get sabnzbd to run on a port other than the server's, i.e., 127.0.0.1. I've updated /etc/conf.d/sabnzbd, but it seems to have no effect.

$this->bbcode_second_pass_code('', '[root@pogo ~]# cat /etc/conf.d/sabnzbd
# This file is used to make association of .nzb files with SABnzbd possible.
# If you do not want this feature, you do no have to fill in these settings.

# The SABnzbd url. Make sure to add a username and password if required
URL="http://192.168.0.113:8080"

# Put the API key from Config > General here
API_KEY=""')

I installed Lynx to make sure it is running on the server itself, and it is. What am I missing?

[yeehaa]

$this->bbcode_second_pass_quote('sjwoo', 'H')ey folks,

For some reason, I just can't get sabnzbd to run on a port other than the server's, i.e., 127.0.0.1. I've updated /etc/conf.d/sabnzbd, but it seems to have no effect.

$this->bbcode_second_pass_code('', '[root@pogo ~]# cat /etc/conf.d/sabnzbd
# This file is used to make association of .nzb files with SABnzbd possible.
# If you do not want this feature, you do no have to fill in these settings.

# The SABnzbd url. Make sure to add a username and password if required
URL="http://192.168.0.113:8080"

# Put the API key from Config > General here
API_KEY=""')

I installed Lynx to make sure it is running on the server itself, and it is. What am I missing?