Kernel 3.9.1 for testing (with BFQ, no AUFS)

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

Kernel 3.9.1 for testing (with BFQ, no AUFS)

Postby moonman » Sun Apr 28, 2013 8:42 am

3.9.1 is out
Code: Select all
pacman -U http://dl.dropboxusercontent.com/u/15043728/ArchLinuxArm/kernels/3.9.1/linux-kirkwood-3.9.1-1-arm.pkg.tar.xz http://dl.dropboxusercontent.com/u/15043728/ArchLinuxArm/kernels/3.9.1/linux-headers-kirkwood-3.9.1-1-arm.pkg.tar.xz

___________________________________________________________________________________________
Compiled the stable version of 3.9, this time with BFQ, but without AUFS still (that's why it isn't in the repository yet)
Code: Select all
pacman -U http://dl.dropboxusercontent.com/u/15043728/ArchLinuxArm/kernels/3.9.0/linux-kirkwood-3.9-2-arm.pkg.tar.xz http://dl.dropboxusercontent.com/u/15043728/ArchLinuxArm/kernels/3.9.0/linux-headers-kirkwood-3.9-2-arm.pkg.tar.xz

___________________________________________________________________________________________
Kernel 3.9-rc8 for testing. It has the new kirkwood cpu idle driver. Boots fine on my devices. Beware: no aufs or BFQ in this kernel since neither has patches for 3.9 yet (BFQ is for better hdd throughput, aufs - if you don't know what it is you don't need it).

Code: Select all
pacman -U http://dl.dropboxusercontent.com/u/15043728/ArchLinuxArm/kernels/3.9-rc8/linux-headers-kirkwood-3.9-1-arm.pkg.tar.xz http://dl.dropboxusercontent.com/u/15043728/ArchLinuxArm/kernels/3.9-rc8/linux-kirkwood-3.9-1-arm.pkg.tar.xz
Last edited by moonman on Wed May 08, 2013 11:48 pm, edited 2 times in total.
Pogoplug V4 | GoFlex Home | Raspberry Pi B 512 | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | |[armv5] How to install my.pogoplug.com service | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3147
Joined: Sat Jan 15, 2011 3:36 am

Re: Kernel 3.9-rc8 for testing

Postby bz31 » Sun May 05, 2013 10:34 am

Could you provide the archlinuxarm.patch for kernel 3.9 ? Thanks.
bz31
 
Posts: 36
Joined: Mon Jun 18, 2012 8:35 am
Location: France

Re: Kernel 3.9-rc8 for testing

Postby moonman » Sun May 05, 2013 5:05 pm

Pogoplug V4 | GoFlex Home | Raspberry Pi B 512 | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | |[armv5] How to install my.pogoplug.com service | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3147
Joined: Sat Jan 15, 2011 3:36 am

Re: Kernel 3.9-rc8 for testing

Postby bz31 » Mon May 06, 2013 12:10 pm

Thanks moonman.
(the build depands on bc)
bz31
 
Posts: 36
Joined: Mon Jun 18, 2012 8:35 am
Location: France

Re: Kernel 3.9-rc8 for testing

Postby moonman » Mon May 06, 2013 7:41 pm

bz31 wrote:Thanks moonman.
(the build depands on bc)


Yes, that's the new dependency since 3.9
Pogoplug V4 | GoFlex Home | Raspberry Pi B 512 | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | |[armv5] How to install my.pogoplug.com service | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3147
Joined: Sat Jan 15, 2011 3:36 am

Re: Kernel 3.9.1 for testing (with BFQ, no AUFS)

Postby bz31 » Thu May 16, 2013 7:33 pm

Hi moonman,
If you have already, could you post a archlinuxarm.patch for kernel 3.10 ? kernel 3.8 and 3.9 have a usb audio problem with my usb sound interface. I want try 3.10-rcX. Thanks.
bz31
 
Posts: 36
Joined: Mon Jun 18, 2012 8:35 am
Location: France

Re: Kernel 3.9.1 for testing (with BFQ, no AUFS)

Postby moonman » Thu May 16, 2013 9:21 pm

No not yet. There's no point making one now because it may not work with the final version. Try the 3.9 patch, it may work.
Pogoplug V4 | GoFlex Home | Raspberry Pi B 512 | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | |[armv5] How to install my.pogoplug.com service | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3147
Joined: Sat Jan 15, 2011 3:36 am

Re: Kernel 3.9.1 for testing (with BFQ, no AUFS)

Postby bz31 » Fri May 17, 2013 7:27 am

Thanks.
No, the 3.9 patch doesn't work.
Have you a kernel 3.5.x package in your achives ? I'd like to test it with my sound card. If not, I'll buid one from KGBUILD.
bz31
 
Posts: 36
Joined: Mon Jun 18, 2012 8:35 am
Location: France

Re: Kernel 3.9.1 for testing (with BFQ, no AUFS)

Postby moonman » Fri May 17, 2013 7:33 am

No I don't. You can get an older PKGBUILD and the patch from github history.
Pogoplug V4 | GoFlex Home | Raspberry Pi B 512 | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | |[armv5] How to install my.pogoplug.com service | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3147
Joined: Sat Jan 15, 2011 3:36 am

Re: Kernel 3.9.1 for testing (with BFQ, no AUFS)

Postby moonman » Fri May 17, 2013 7:37 am

Pogoplug V4 | GoFlex Home | Raspberry Pi B 512 | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | |[armv5] How to install my.pogoplug.com service | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3147
Joined: Sat Jan 15, 2011 3:36 am

Next

Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 1 guest