How to connect the card TQ6410 with my PC?

[andrea1977]

Hi guys,

I bought a TQ6410 with OS linux EmbedSky on board. I want to modify the
software. I am PHP programmer, this is the first time. I want to change the
software of an embedded board. How it works? How do I connect the card to
my computer in order to edit the boot and the operating system?

The image of my board:
http://images-en.busytrade.com/169430400/S3c6410-Arm11-Development-Board-7-Tft-Lcd-Tq6410.jpg

thanks

[WarheadsSE]

http://www.cutedigi.com/popup_image.php ... 11&image=3

Assuming you have the full devkit, the above should have the serial with it. Otherwise, you will need to locate which serial pinout has the ttyS0 or associated. see here

[andrea1977]

Hi WarheadsSE,

thank you for reply (sorry but my English is not good)..

I took pictures of my card and my connections, the filename is TQ6410-connections.png, I have connected my PC with TQ6410 from cable with the LAN port in my PC, and RS232 of TQ6410 board.

This is original photo:
http://imageshack.us/photo/my-images/341/tq6410connections.png

But when i turn the PC i have a first-screen:
http://imageshack.us/photo/my-images/716/firstscreen.png

and then 10 seconds, i have a second screen with chinese language ..and my pc don't work with board TQ6410.
http://imageshack.us/photo/my-images/854/secondscreen.png

I don't undestand the problem of connections.

You have write:"Otherwise, you will need to locate which serial pinout has the ttyS0 or associated"..
In the photo of my card you see the pinout?

Thank

[WarheadsSE]

The second URL I posted has an image with markings of which connections are which.