by mbakhterev » Tue Aug 11, 2020 5:56 pm
$this->bbcode_second_pass_quote('Kabbone', '
')no, I used the same.
Did you use your old boot.txt? Because I mean will be probably wrong for you, because it assumes a boot partition and a BTRFS root with the label "ROOTFS"
My frequency shouldn't be the problem if it ran before. Perhaps your board could also handle the default 800 one, but mine wasn't able to right from the begining.
Your boot.txt should look like
that if it's default.
Here is mine
$this->bbcode_second_pass_code('', '# cat boot.txt
# After modifying, run ./mkscr
# MAC address (use spaces instead of colons)
setenv macaddr da 19 c8 7a 6d f4
# part uuid ${devtype} ${devnum}:${bootpart} uuid
part uuid ${devtype} ${devnum}:3 uuid
setenv bootargs audit=0 console=ttyS2,1500000 root=PARTUUID=${uuid} rw rootwait earlycon=uart8250,mmio32,0xff130000 init=/usr/lib/systemd/systemd
setenv fdtfile rockchip/rk3328-rock64.dtb
if load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /Image; then
if load ${devtype} ${devnum}:${bootpart} ${fdt_addr_r} /dtbs/${fdtfile}; then
fdt addr ${fdt_addr_r}
fdt resize
fdt set /ethernet@ff540000 local-mac-address "[${macaddr}]"
if load ${devtype} ${devnum}:${bootpart} ${ramdisk_addr_r} /initramfs-linux-fallback.img; then
booti ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r};
else
booti ${kernel_addr_r} - ${fdt_addr_r};
fi;
fi;
fi')
The @ramsey's recipe
viewtopic.php?f=67&t=14576 works for me. May be because of newer versions. Anyway system is up and running. Thanks a lot for the help!
P.S. Where i can find u-boot description to understand the u-boot architecture?