Compiling new kernel to support usb dvb devices.

[dhead666]

Hi.

I'm real ArchLinux newbie and Linux noob, all I wanted was to be able using my sheevaplug with usb dvb-t dongle and run vdr as pvr server.

After successfully installing ArchLinux and updating the system with pacman, the updated kernel version set to 3.1.10-9.
The problem is that my dvb-t dongle (it9135) doesn't recognized.
I thought that the fault was with the kernel version and updating it somehow (manual compiling, which I don't want to) would fix the issue, but also my old af9015 doesn't work.
After a quick look on the github repository https://github.com/archlinuxarm/PKGBUIL ... ood/config it seems that the drivers are not include at all.

Is the proper solution for this is to set
"CONFIG_DVB_USB_IT913X=y"
"CONFIG_DVB_USB_AF9015=y"
(and does "=m" means the driver isn't enable)
???
and then "makepkg" and "pacman -U" ?

[hydro]

Just a few hints
$this->bbcode_list('1')

"m" means the driver is included as a module.

the config in the github repository is for linux-kirkwood, not linux

current linux package is 3.1.10-12

identify your DVB devices by their USB IDs as reported by lsusb

read the last lines of the output generated by dmesg after you inserted a device

If the kernel really does not support your devices your options are
$this->bbcode_list('1')

report the issue at github repository

recompile the kernel

install v4l-dvb package

Here is an example that shows how to get the drivers from v4l-dvb repository, but only include the modules needed and here is how I had previously recompiled the kernel.

[dhead666]

Thanks hydro, that was quick.

The lsusb command shows info correctly on both af9015 and it9135,

Output of dmesg "usb 1-1: new high speed USB device number 4 using orion-ehci" for both devices.
I'm guessing no drivers for both of the devices.

The odd thing is that the driver for af9015 should be included,
so I run find command and was able to locate "dvb-usb-af9015.ko.gz" in "/usr/lib/modules/3.1.10-12-ARCH/",
meaning I have kernel package 3.1.10-12 installed, but uname -r output 3.1.10-9, meaning the newer kernel isn't loaded to the system.
Copying the new uImage (installed by the kernel package) to the correct location uBoot looks in made sure the correct kernel would be loaded.

Now the af9015 driver loaded and shows by dmesg, manually adding the firmware file and the device seems to be usable (did a quick scan).

My next goal will be to try having the it9135 working, I will surely follow your notes, Thanks.

$this->bbcode_second_pass_quote('dhead666', '
')The lsusb command shows info correctly on both af9015 and it9135

[dhead666]

Here's dmesg output
$this->bbcode_second_pass_code('', 'Bus 001 Device 005: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick
Bus 001 Device 006: ID 048d:9006 Integrated Technology Express, Inc.')

I had to copy the uImage to the separate boot partition (I run cmp between the new and the old files to make sure they aren't the same).
After rebooting dmesg gives this output for af9015
$this->bbcode_second_pass_code('', '
[ 5584.890823] usb 1-1: new high speed USB device number 7 using orion-ehci
[ 5585.412026] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
[ 5585.416231] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[ 5585.485297] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
[ 5585.485710] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 5585.486444] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
[ 5585.489521] af9013: firmware version:4.95.0.0
[ 5585.496154] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[ 5585.498643] tda18218: NXP TDA18218HN successfully identified.
[ 5585.500281] Registered IR keymap rc-empty
[ 5585.502053] input: IR-receiver inside an USB DVB receiver as /devices/platform/orion-ehci.0/usb1/1-1/rc/rc1/input3
[ 5585.502462] rc1: IR-receiver inside an USB DVB receiver as /devices/platform/orion-ehci.0/usb1/1-1/rc/rc1
[ 5585.502479] dvb-usb: schedule remote query interval to 500 msecs.
[ 5585.502494] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.')

dmesg for it9135
$this->bbcode_second_pass_code('', '[ 5733.980036] usb 1-1: new high speed USB device number 8 using orion-ehci
[ 5734.140698] input: ITE Technologies, Inc. DVB-T TV Stick as /devices/platform/orion-ehci.0/usb1/1-1/1-1:1.1/input/input4
[ 5734.141184] generic-usb 0003:048D:9006.0003: input: USB HID v1.01 Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on usb-orion-ehci.0-1/input1')

[hydro]

Okay, so you were obviously right about the missing kernel option CONFIG_DVB_USB_IT913X (I did a bit of searching in the v4l-dvb sources
$this->bbcode_second_pass_code('', '
$ grep -i -e 048d -e 9006 linux/drivers/media/dvb/dvb-core/dvb-usb-ids.h
#define USB_VID_ITETECH 0x048d
#define USB_PID_ITETECH_IT9135_9006 0x9006
$ grep -R -l USB_VID_ITETECH | xargs grep -l -e USB_PID_ITETECH_IT9135_9006
linux/drivers/media/dvb/dvb-usb/it913x.c
linux/drivers/media/dvb/dvb-core/dvb-usb-ids.h
$ find -type f -name Makefile | xargs grep "CONFIG.*it913x"
./linux/drivers/media/dvb/dvb-usb/Makefile:obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o
./linux/drivers/media/dvb/frontends/Makefile:obj-$(CONFIG_DVB_IT913X_FE) += it913x-fe.o
')
). On current Arch Linux (x86_64) the module is present in the kernel (3.4.8) package and it supports the device
$this->bbcode_second_pass_code('', '
$ zgrep CONFIG_DVB_USB_IT913X /proc/config.gz
CONFIG_DVB_USB_IT913X=m
$ modinfo dvb-usb-it913x|grep -i "048d.*9006"
alias: usb:v048Dp9006d*dc*dsc*dp*ic*isc*ip*
')

Edit:
Looks like the driver is not yet present in kernel 3.1, so option 1 and 2 may also require updating uBoot.

If you choose option 3 and want to use my v4l-dvb package here are the minimum options
$this->bbcode_second_pass_code('', '
<M> Multimedia support --->
[*] Digital TV support
[*] Remote Controller support
[*] DVB/ATSC adapters (NEW) --->
<M> Support for various USB DVB devices
<M> it913x driver
')

[dhead666]

Thanks,
Right now I'm happy with my af9015,
I'll surely try your v4l-dvb package next week.

p.s I like your website (http://linux.bplaced.net, thanks for google translate),
you should add a link in your signature.