/proc/mtd ????-> /etc/fw_env.config

[netter]

using the data from dmesg and /proc/mtd how do i configure /etc/fw_env.config

what math do i apply to figure out the offsets and other data for a Tonidoplug

also the output of cat /prov/mtd is

mtd0 00100000 00020000 "u-boot"
mtd1 00400000 00020000 "uImage"
mtd2 1fb00000 0020000 "root"

[netter]

thanks for the warning. So what options do I have left to try to fix my boot issues? I've replaced the uImage with several different types before and all went well, but still boot problems. Can I apply some other changes?

[netter]

so I know this forum isn't very active, at least at the moment, but what else can I do to try and remedy these boot issues for the tonidoplug. Can I use some other uImage? anything?

[netter]

so i'm guessing tonidoplugs are the plug people avoid when choosing.. I assumed like you said earlier it was smart of the developers to set up uboot the way they did with the tonido plug.

One last question. With the Arch Linux ARM install setup, does it include a different uboot or after boot differently?

[netter]

alright i guess i'll take a laugh, thanks for your advice.