ZyXEL NSA320: eth0 "link is not ready"

[CharlesB]

$this->bbcode_second_pass_quote('WarheadsSE', 'I') have yet to be able to re-create the problem on my device.

$this->bbcode_second_pass_quote('CharlesB', '')$this->bbcode_second_pass_quote('WarheadsSE', 'I') have yet to be able to re-create the problem on my device.

[WarheadsSE]

If so, we'll drop you the fix to test.

[CharlesB]

$this->bbcode_second_pass_quote('Kurlon', 'A')re you able to reproduce the issue right now?

[Kurlon]

I've got a kernel build started, if you can, join us on IRC #archlinux-arm on freenode.net.

[Kurlon]

So, demonstrated that my theory about the gigeth definition in the board file wasn't the culprit with a couple test kernels. The only other thing jumping out at me is the huge difference between the uboot MPP setup, and what the kernel is setting it to:

$this->bbcode_second_pass_code('', '[ 13.939119] initial MPP regs: 21111111 01003311 33331100 33003333 00000533 20202000 00000000
[ 13.939151] final MPP regs: 01111111 00003311 00001100 00000000 00000000 00000000 00000000')

We're ignoring a LARGE number of multi-purpose pins and I'm not 100% certain that's right. Unfortunately I'm not able to translate the initial set to a valid conf based on what mpp.h lists, the select numbers don't make sense for many of the pins.

[WarheadsSE]

What that does tell me though, is there something, I am not sure what, isn't being init'd right.

[gisErre]

Hello,

I am having the same probleme, but booting to stock firmware don't solve in my case,
egiga0 works, I got an IP adress and can ping google, but after reboot to arch I got
$this->bbcode_second_pass_code('', '[ 46.734512] ADDRCONF(NETDEV_UP): eth0: link is not ready')

how do you reboot and keep eth0 working ?

thanks

[prokrypt]

$this->bbcode_second_pass_quote('gisErre', 'H')ello,

I am having the same probleme, but booting to stock firmware don't solve in my case,
egiga0 works, I got an IP adress and can ping google, but after reboot to arch I got
$this->bbcode_second_pass_code('', '[ 46.734512] ADDRCONF(NETDEV_UP): eth0: link is not ready')

how do you reboot and keep eth0 working ?

thanks

[WarheadsSE]

Also, once in linux, try this:
viewtopic.php?f=27&t=3708&start=30#p22861