by LeeBrown » Fri Nov 16, 2012 11:12 am
dmesg
$this->bbcode_second_pass_code('', '[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.5-1-ARCH (nobody@alarm) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 14:06:12 UTC 2012
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: ODROID-X
[ 0.000000] cma: CMA: reserved 16 MiB at 6e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU EXYNOS4412 (id 0xe4412211)
[ 0.000000] exynos4_init_clocks: initializing clocks
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] s3c_register_clksrc: clock armclk has no registers set
[ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
[ 0.000000] audiocdclk: no parent clock specified
[ 0.000000] exynos4_setup_clocks: registering clocks
[ 0.000000] exynos4_setup_clocks: xtal is 24000000
[ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000
[ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=160000000
ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
[ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 50000000
[ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000
[ 0.000000] On node 0 totalpages: 257792
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 188944 pages, LIFO batch:31
[ 0.000000] HighMem zone: 526 pages used for memmap
[ 0.000000] HighMem zone: 66802 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0e54000 s7936 r8192 d12544 u32768
[ 0.000000] pcpu-alloc: s7936 r8192 d12544 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255746
[ 0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p3 ro rootfstype=ext4 rootwait loglevel=3 console=ttySAC1,115200
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 48MB 216MB 743MB = 1007MB total
[ 0.000000] Memory: 999116k/1015500k available, 32052k reserved, 269312K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc05869f4 (5627 kB)
.init : 0xc0587000 - 0xc05b3f00 ( 180 kB)
.data : 0xc05b4000 - 0xc060ace0 ( 348 kB)
.bss : 0xc060ad04 - 0xc0647160 ( 242 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:549
[ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.045000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
[ 0.045000] pid_max: default: 32768 minimum: 301
[ 0.045000] Mount-cache hash table entries: 512
[ 0.045000] Initializing cgroup subsys cpuacct
[ 0.045000] Initializing cgroup subsys devices
[ 0.045000] Initializing cgroup subsys freezer
[ 0.045000] Initializing cgroup subsys blkio
[ 0.045000] Initializing cgroup subsys perf_event
[ 0.045000] CPU: Testing write buffer coherency: ok
[ 0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.045000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.045000] Setting up static identity map for 0x404274b0 - 0x40427508
[ 0.045000] L310 cache controller enabled
[ 0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
[ 0.070000] CPU1: Booted secondary processor
[ 0.090000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.090000] CPU1: Unknown IPI message 0x1
[ 0.100000] CPU2: Booted secondary processor
[ 0.120000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.120000] CPU2: Unknown IPI message 0x1
[ 0.130000] CPU3: Booted secondary processor
[ 0.150000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.150000] CPU3: Unknown IPI message 0x1
[ 0.150000] Brought up 4 CPUs
[ 0.150000] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
[ 0.150000] devtmpfs: initialized
[ 0.155000] dummy:
[ 0.155000] NET: Registered protocol family 16
[ 0.160000] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.165000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.165000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.165000] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.165000] EXYNOS4x12 PMU Initialize
[ 0.165000] EXYNOS: Initializing architecture
[ 0.165000] s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
[ 0.165000] bio: create slab <bio-0> at 0
[ 0.165000] hdmi_5v: 5000 mV
[ 0.170000] SCSI subsystem initialized
[ 0.170000] usbcore: registered new interface driver usbfs
[ 0.170000] usbcore: registered new interface driver hub
[ 0.170000] usbcore: registered new device driver usb
[ 0.170000] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.170000] s3c-i2c s3c2440-i2c.0: bus frequency set to 390 KHz
[ 0.170000] max77686 0-0009: device found
[ 0.170000] max77686 0-0009: irq is not specified
[ 0.170000] VDD_ALIVE_1.0V: 1000 mV
[ 0.170000] VDDQ_M1M2_1.8V: 1800 mV
[ 0.170000] VDDQ_M0_1.8V: 1800 mV
[ 0.170000] VDDQ_MMC2_2.8V: 2800 mV
[ 0.175000] VDDQ_MMC13_1V8: 1800 mV
[ 0.175000] VDD_MPLL_1.0V: 1000 mV
[ 0.175000] VDD_VPLL_1.0V: 1000 mV
[ 0.175000] VDD10_HDMI_1.0V: 1000 mV
[ 0.175000] VDD_VTCORE_1.0V: 1000 mV
[ 0.180000] VDDQ_MIPIHSI_1.8V: 1800 mV
[ 0.180000] VDD18_ABB1_1.8V: 1800 mV
[ 0.180000] VDD33_UOTG_3.3V: 3300 mV
[ 0.180000] VDDQ_C2C_1.8V: 1800 mV
[ 0.180000] VDD18_ABB2_1.8V: 1800 mV
[ 0.180000] VDD10_HSIC_1.0V: 1000 mV
[ 0.185000] VDD18_HSIC_1.8V: 1800 mV
[ 0.185000] VDDQ_CAM_1.8V: 1800 mV
[ 0.185000] VDD_LDO18_1.8V: 1800 mV
[ 0.185000] VDD_VTCAM_1.8V: 1800 mV
[ 0.185000] VDD_LDO20_1V8: 1800 mV
[ 0.185000] VDD_SDCARD_3.3V: 3300 mV
[ 0.185000] VDD_LDO22_2.8V: 2800 mV
[ 0.190000] VDD_TOUCH_2.8V: 2800 mV
[ 0.190000] VDD_TOUCHLED_3.3V: 3300 mV
[ 0.190000] VDDQ_LCD_1.8V: 1800 mV
[ 0.190000] VDD_MOTOR_3.0V: 3000 mV
[ 0.190000] VDD_MIF_1.0V: 800 <--> 1050 mV at 1000 mV
[ 0.190000] VDD_ARM_1.3V: 800 <--> 1400 mV at 1100 mV
[ 0.195000] VDD_INT_1.0V: 800 <--> 1150 mV at 1000 mV
[ 0.195000] VDD_G3D_1.0V: 850 <--> 1200 mV at 1000 mV
[ 0.195000] VDDQ_CKEM1M2_1.2V: 1200 mV
[ 0.195000] VDD_INL_1.35V: 1350 mV
[ 0.195000] VDD_INL_2.0V: 2000 mV
[ 0.195000] VDD_BUCK8_2.8V: 2800 mV
[ 0.200000] VDD_BUCK9_1.2V: 1200 mV
[ 0.200000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.1: bus frequency set to 390 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.3: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.3: bus frequency set to 390 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-i2c.7: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-i2c.7: bus frequency set to 390 KHz
[ 0.200000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 0.200000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
[ 0.200000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 390 KHz
[ 0.200000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
[ 0.200000] Linux video capture interface: v2.00
[ 0.200000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.200000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.200000] Switching to clocksource mct-frc
[ 0.205000] NET: Registered protocol family 2
[ 0.205000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.205000] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.205000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.205000] TCP: reno registered
[ 0.205000] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.205000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.210000] NET: Registered protocol family 1
[ 0.210000] audit: initializing netlink socket (disabled)
[ 0.210000] type=2000 audit(0.210:1): initialized
[ 0.210000] bounce pool size: 64 pages
[ 0.215000] NILFS version 2 loaded
[ 0.215000] Btrfs loaded
[ 0.215000] msgmni has been set to 1457
[ 0.215000] io scheduler noop registered
[ 0.215000] io scheduler deadline registered
[ 0.215000] io scheduler cfq registered (default)
[ 0.215000] start plist test
[ 0.225000] end plist test
[ 0.225000] s3c-fb exynos4-fb.0: start latency exceeded, new value 1000 ns
[ 0.225000] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 34208 ns
[ 0.245000] Console: switching to colour frame buffer device 170x48
[ 0.255000] s3c-fb exynos4-fb.0: window 0: fb
[ 0.255000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[ 0.255000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.260000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[ 0.260000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.260000] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
[ 0.260000] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 0.260000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.260000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
[ 0.260000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
[ 0.265000] console [ttySAC1] enabled
[ 0.265000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
[ 0.270000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
[ 0.275000] brd: module loaded
[ 0.275000] loop: module loaded
[ 0.275000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.275000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 0.275000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 0.275000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
[ 0.285000] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
[ 0.285000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.285000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.285000] usb usb1: Product: S5P EHCI Host Controller
[ 0.285000] usb usb1: Manufacturer: Linux 3.6.5-1-ARCH ehci_hcd
[ 0.285000] usb usb1: SerialNumber: s5p-ehci
[ 0.285000] hub 1-0:1.0: USB hub found
[ 0.285000] hub 1-0:1.0: 3 ports detected
[ 0.285000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.285000] exynos-ohci exynos-ohci: Already power on PHY
[ 0.285000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[ 0.285000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
[ 0.285000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
[ 0.340000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.340000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.340000] usb usb2: Product: EXYNOS OHCI Host Controller
[ 0.340000] usb usb2: Manufacturer: Linux 3.6.5-1-ARCH ohci_hcd
[ 0.340000] usb usb2: SerialNumber: exynos-ohci
[ 0.340000] hub 2-0:1.0: USB hub found
[ 0.340000] hub 2-0:1.0: 3 ports detected
[ 0.340000] Initializing USB Mass Storage driver...
[ 0.340000] usbcore: registered new interface driver usb-storage
[ 0.340000] USB Mass Storage support registered.
[ 0.340000] usb3503: USB HUB driver init
[ 0.340000] usb3503: usb3503_probe:380
[ 0.340000] usb3503: usb3503_set_mode: mode = 1
[ 0.445000] usb3503: reg_write: write E7, req:03, val:03
[ 0.445000] usb3503: PDS update fail err = -1
[ 0.445000] usb3503: usb3503_probe: probed on hub mode
[ 0.445000] i2c-core: driver [usb3503] using legacy suspend method
[ 0.445000] i2c-core: driver [usb3503] using legacy resume method
[ 0.445000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 0.445000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 0.445000] s5p-hdmiphy 8-0038: probe successful
[ 0.455000] s5p-hdmi exynos4-hdmi: probe successful
[ 0.455000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[ 0.455000] s5p-mixer s5p-mixer: probe start
[ 0.455000] s5p-mixer s5p-mixer: resources acquired
[ 0.455000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
[ 0.455000] s5p-mixer s5p-mixer: module s5p-sdo is missing
[ 0.455000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video0
[ 0.455000] fb1: registered frame buffer emulation for /dev/video0
[ 0.455000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video1
[ 0.455000] fb2: registered frame buffer emulation for /dev/video1
[ 0.455000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video2
[ 0.455000] fb3: registered frame buffer emulation for /dev/video2
[ 0.455000] s5p-mixer s5p-mixer: probe successful
[ 0.455000] cpuidle: using governor ladder
[ 0.455000] sdhci: Secure Digital Host Controller Interface driver
[ 0.455000] sdhci: Copyright(c) Pierre Ossman
[ 0.455000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (50000000 Hz)
[ 0.455000] mmc0: no vmmc regulator found
[ 0.455000] Registered led device: mmc0::
[ 0.485000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
[ 0.485000] Registered led device: led1
[ 0.485000] Registered led device: led2
[ 0.485000] usbcore: registered new interface driver usbhid
[ 0.485000] usbhid: USB HID core driver
[ 0.485000] HKDK TMU: Platform Device Init
[ 0.485000] HKDK TMU: Platform Driver Init
[ 0.485000] HKDK TMU: Loaded
[ 0.490000] HKDK TMU: Pdev
[ 0.490000] HKDK TMU: MAX CPU Frequency: 1704000
[ 0.495000] HKDK TMU: Set TMU Status
[ 0.500000] HKDK TMU: Got IRQ
[ 0.500000] HKDK TMU: Request IRQ
[ 0.505000] HKDK TMU: Request IO Memory
[ 0.510000] HKDK TMU: Remap IO Memory
[ 0.520000] mmc0: new high speed SDHC card at address 0007
[ 0.520000] mmcblk0: mmc0:0007 SD16G 14.9 GiB
[ 0.515000] HKDK TMU: Compensation Parameter is: 1039323
[ 0.520000] HKDK TMU: CPU Registers Initialization Complete
[ 0.520000] mmcblk0: p1 p2 p3 p4
[ 0.525000] HKDK TMU: Rising Threshold: 82786e
[ 0.530000] HKDK TMU: Initialized
[ 0.530000] HKDK TMU: Created Queue
[ 0.535000] HKDK TMU: INIT Queue
[ 0.540000] HKDK TMU: Delay Work created on the queue
[ 0.550000] max98090 1-0010: revision 0x42
[ 0.555000] [MAX98090] max98090_set_record_main_mic(150)
[ 0.560000] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 <-> samsung-i2s.0 mapping ok
[ 0.560000] hkdk-snd-max89090 hkdk-snd-max89090: max98090-aif1 <-> samsung-i2s.0 mapping ok
[ 0.560000] TCP: cubic registered
[ 0.560000] NET: Registered protocol family 17
[ 0.560000] NET: Registered protocol family 15
[ 0.560000] NET: Registered protocol family 35
[ 0.560000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.560000] Registering SWP/SWPB emulation handler
[ 0.565000] VDD_G3D_1.0V: incomplete constraints, leaving on
[ 0.565000] VDDQ_LCD_1.8V: incomplete constraints, leaving on
[ 0.565000] s3c-rtc s3c64xx-rtc: setting system clock to 2012-09-14 22:06:38 UTC (1347660398)
[ 0.565000] ALSA device list:
[ 0.565000] #0: hkdk-max98090
[ 0.590000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 0.590000] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
[ 0.600000] devtmpfs: mounted
[ 0.600000] Freeing init memory: 176K
[ 0.670000] usb 1-2: new high-speed USB device number 2 using s5p-ehci
[ 0.800000] usb 1-2: New USB device found, idVendor=0424, idProduct=3503
[ 0.800000] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.800000] hub 1-2:1.0: USB hub found
[ 0.800000] hub 1-2:1.0: 3 ports detected
[ 1.085000] usb 1-2.1: new high-speed USB device number 3 using s5p-ehci
[ 1.190000] usb 1-2.1: New USB device found, idVendor=0424, idProduct=9514
[ 1.190000] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.190000] hub 1-2.1:1.0: USB hub found
[ 1.190000] hub 1-2.1:1.0: 5 ports detected
[ 1.350000] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 1.415000] systemd[1]: could not find module by name='autofs4'
[ 1.415000] systemd[1]: Failed to insert 'autofs4'
[ 1.460000] usb 1-2.1.1: new high-speed USB device number 4 using s5p-ehci
[ 1.510000] NET: Registered protocol family 10
[ 1.510000] systemd[1]: Inserted module 'ipv6'
[ 1.515000] systemd[1]: No hostname configured.
[ 1.515000] systemd[1]: Set hostname to <localhost>.
[ 1.565000] usb 1-2.1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.565000] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.985000] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 1.985000] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.985000] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.990000] systemd[1]: Expecting device dev-ttySAC1.device...
[ 2.000000] systemd[1]: Starting Remote File Systems.
[ 2.010000] systemd[1]: Reached target Remote File Systems.
[ 2.010000] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.020000] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.020000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.030000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.030000] systemd[1]: Starting Encrypted Volumes.
[ 2.040000] ------------[ cut here ]------------
[ 2.040000] WARNING: at kernel/irq/manage.c:436 enable_irq+0x3c/0x74()
[ 2.040000] Unbalanced enable for IRQ 212
[ 2.040000] Modules linked in: ipv6
[ 2.040000] [<c0014f88>] (unwind_backtrace+0x0/0xf8) from [<c0023518>] (warn_slowpath_fmt+0x5c/0x78)
[ 2.040000] [<c0023518>] (warn_slowpath_fmt+0x5c/0x78) from [<c007e328>] (enable_irq+0x3c/0x74)
[ 2.040000] systemd[1]: Reached target Encrypted Volumes.
[ 2.040000] [<c007e328>] (enable_irq+0x3c/0x74) from [<c03346ac>] (tmu_work_out+0x10/0x128)
[ 2.040000] [<c03346ac>] (tmu_work_out+0x10/0x128) from [<c003a63c>] (process_one_work+0x12c/0x434)
[ 2.040000] [<c003a63c>] (process_one_work+0x12c/0x434) from [<c003ace0>] (worker_thread+0x164/0x46c)
[ 2.040000] [<c003ace0>] (worker_thread+0x164/0x46c) from [<c003f870>] (kthread+0x84/0x90)
[ 2.040000] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.040000] [<c003f870>] (kthread+0x84/0x90) from [<c000f4b8>] (kernel_thread_exit+0x0/0x8)
[ 2.040000] ---[ end trace db770d0891b43506 ]---
[ 2.040000] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.040000] systemd[1]: Starting udev Kernel Socket.
[ 2.050000] systemd[1]: Listening on udev Kernel Socket.
[ 2.050000] systemd[1]: Starting udev Control Socket.
[ 2.060000] systemd[1]: Listening on udev Control Socket.
[ 2.060000] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.060000] systemd[1]: Failed to open /dev/autofs: No such file or directory
[ 2.060000] systemd[1]: Failed to initialize automounter: No such file or directory
[ 2.090000] systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.090000] systemd[1]: Unit proc-sys-fs-binfmt_misc.automount entered failed state
[ 2.090000] systemd[1]: Starting Swap.
[ 2.100000] systemd[1]: Reached target Swap.
[ 2.100000] systemd[1]: Expecting device dev-mmcblk0p2.device...
[ 2.110000] systemd[1]: Starting Journal Socket.
[ 2.120000] systemd[1]: Listening on Journal Socket.
[ 2.120000] systemd[1]: Starting File System Check on Root Device...
[ 2.200000] systemd[1]: Starting Setup Virtual Console...
[ 2.285000] systemd[1]: Started Load Kernel Modules.
[ 2.290000] systemd[1]: Mounted Configuration File System.
[ 2.290000] systemd[1]: Mounting Debug File System...
[ 2.365000] systemd[1]: Started Set Up Additional Binary Formats.
[ 2.365000] systemd[1]: Starting udev Kernel Device Manager...
[ 2.435000] systemd[1]: Starting udev Coldplug all Devices...
[ 2.495000] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.495000] systemd-udevd[76]: starting version 195
[ 2.495000] systemd[1]: Mounted FUSE Control File System.
[ 2.580000] systemd[1]: Starting Apply Kernel Variables...
[ 2.635000] systemd[1]: Mounted Huge Pages File System.
[ 2.635000] systemd[1]: Starting Journal Service...
[ 2.720000] systemd[1]: Started Journal Service.
[ 2.735000] systemd[1]: Started udev Kernel Device Manager.
[ 2.815000] systemd[1]: Started File System Check on Root Device.
[ 2.870000] systemd[1]: Started Setup Virtual Console.
[ 2.880000] systemd[1]: Mounted Debug File System.
[ 2.995000] systemd[1]: Started Apply Kernel Variables.
[ 2.995000] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.085000] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
[ 3.100000] systemd[1]: Started udev Coldplug all Devices.
[ 3.145000] systemd[1]: Started Remount Root and Kernel File Systems.
[ 3.145000] systemd[1]: Starting Local File Systems (Pre).
[ 3.155000] systemd[1]: Reached target Local File Systems (Pre).
[ 3.155000] systemd[1]: Mounting /tmp...
[ 3.155000] s5p-mixer s5p-mixer: start latency exceeded, new value 750 ns
[ 3.155000] s5p-mixer s5p-mixer: state restore latency exceeded, new value 70292 ns
[ 3.155000] s5p-mixer s5p-mixer: stop latency exceeded, new value 1042 ns
[ 3.155000] s5p-mixer s5p-mixer: start latency exceeded, new value 834 ns
[ 3.155000] s5p-mixer s5p-mixer: state save latency exceeded, new value 11375 ns
[ 3.180000] mmcblk0: r/w command failed, status = 0x80000900
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 892960
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 892968
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 892976
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 892984
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 892992
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 893000
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 893008
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 893016
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 893024
[ 3.180000] end_request: I/O error, dev mmcblk0, sector 893032
[ 3.225000] systemd[1]: Starting Load Random Seed...
[ 3.295000] smsc95xx v1.0.4
[ 3.300000] smsc95xx_read_mac_addr : Can't file(/usr/smsc95xx_mac_addr) create!!
[ 3.300000] smsc95xx 1-2.1.1:1.0: (unregistered net_device): Failed to write smsc95xx_mac_addr file!
[ 3.305000] systemd[1]: Mounted /tmp.
[ 3.315000] systemd[1]: Found device /dev/ttySAC1.
[ 3.345000] smsc95xx 1-2.1.1:1.0: eth0: register 'smsc95xx' at usb-s5p-ehci-2.1.1, smsc95xx USB 2.0 Ethernet, 8a:9d:8e:12:e7:ec
[ 3.350000] usbcore: registered new interface driver smsc95xx
[ 3.395000] systemd[1]: Starting Sound Card.
[ 3.410000] systemd[1]: Reached target Sound Card.
[ 3.455000] systemd[1]: Started Load Random Seed.
[ 3.745000] mmcblk0: r/w command failed, status = 0x80000900
[ 3.745000] Buffer I/O error on device mmcblk0p4, logical block 1937631
[ 3.775000] systemd[1]: Found device /dev/mmcblk0p2.
[ 3.775000] systemd[1]: Starting File System Check on /dev/mmcblk0p2...
[ 4.245000] systemd[1]: Started File System Check on /dev/mmcblk0p2.
[ 4.245000] systemd[1]: Mounting /boot...
[ 4.440000] systemd[1]: Mounted /boot.
[ 4.440000] systemd[1]: Starting Local File Systems.
[ 4.450000] systemd[1]: Reached target Local File Systems.
[ 4.450000] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[ 4.540000] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 4.700000] systemd-journald[83]: Received SIGUSR1
[ 4.805000] systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
[ 4.860000] systemd[1]: Started Recreate Volatile Files and Directories.
[ 4.860000] systemd[1]: Starting System Initialization.
[ 4.870000] systemd[1]: Reached target System Initialization.
[ 4.870000] systemd[1]: Starting D-Bus System Message Bus Socket.
[ 4.880000] systemd[1]: Listening on D-Bus System Message Bus Socket.
[ 4.880000] systemd[1]: Starting Sockets.
[ 4.890000] systemd[1]: Reached target Sockets.
[ 4.890000] systemd[1]: Starting Daily Cleanup of Temporary Directories.
[ 4.890000] systemd[1]: Started Daily Cleanup of Temporary Directories.
[ 4.890000] systemd[1]: Starting Restore Sound Card State...
[ 4.980000] systemd[1]: Starting Basic System.
[ 4.990000] systemd[1]: Reached target Basic System.
[ 4.990000] systemd[1]: Starting dhcpcd on eth0...
[ 5.070000] systemd[1]: Started SSH Key Generation.
[ 5.070000] systemd[1]: Starting OpenSSH Daemon...
[ 5.155000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.170000] systemd[1]: Started OpenSSH Daemon.
[ 5.170000] systemd[1]: Starting Login Service...
[ 5.235000] systemd[1]: Starting D-Bus System Message Bus...
[ 5.330000] systemd[1]: Started D-Bus System Message Bus.
[ 5.330000] systemd[1]: Starting Permit User Sessions...
[ 5.530000] systemd[1]: Started Restore Sound Card State.
[ 5.605000] systemd[1]: Started Permit User Sessions.
[ 5.605000] systemd[1]: Starting Getty on tty1...
[ 5.690000] systemd[1]: Started Getty on tty1.
[ 5.690000] systemd[1]: Starting Serial Getty on ttySAC1...
[ 5.765000] systemd[1]: Started Serial Getty on ttySAC1.
[ 5.765000] systemd[1]: Starting Login Prompts.
[ 5.775000] systemd[1]: Reached target Login Prompts.
[ 6.845000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.845000] smsc95xx 1-2.1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 1849.710000] mmcblk0: r/w command failed, status = 0x80000900
[ 1849.710000] blk_update_request: 91 callbacks suppressed
[ 1849.710000] end_request: I/O error, dev mmcblk0, sector 31260408
[ 1849.710000] Buffer I/O error on device mmcblk0p4, logical block 1937631
[ 1850.385000] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
')