Hello all,
I installed the os instructed, making some minor changes to the following files:
$this->bbcode_second_pass_code('', '
# /boot/config.txt
echo 'dtoverlay=dwc2 >> /boot/config.txt
# /boot/cmdline.txt
root=/dev/mmcblk0p2 rw rootwait modules-load=dwc2,g_ether console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N kgdboc=ttyAMA0,115200 elevator=noop
# /etc/systemd/network/usb.network
[Match]
Name = usb*
[Network]
Address = 192.168.34.2/24
')
I verified that the pi boots with an FTDI-dongle, and I can ping the pi from my notebook.
As soon as I try to connect via ssh, ssh hangs and ping stops to respond. dmesg both on the pi and on the notebook show nothing.
Dropping the sd-card into a brand-new pi zero w yields the exact same result, so I suppose it's a software issue.
Any ideas?