Display plymouth splash screen earlier in boot process

This forum is for topics specific to the Raspberry Pi and Arch Linux ARM

Display plymouth splash screen earlier in boot process

Postby mashley » Mon May 22, 2017 2:53 pm

I have a Pi 2 set up to boot directly to a SNES emulator and running inside a SNES case mod. I made an initrd to include the ply-image binary and loading screen, and the emulator was started using auto-login and a script in .bash_login. This has been working well, but the boot time of 17s bothered me, so I removed the auto-login and tried running the emulator using a systemd service. This got the boot time down to a much more reasonable 10 seconds.

The problem I have is that most of the boot time is spent on a black screen. Once the Plymouth splash screen appears, the emulator service starts almost immediately, resulting in the splash screen being displayed only momentarily. I would prefer for the loading screen to appear much sooner after powering on and remaining on the screen for the duration of the bootup process, only to be replaced once the emulator service starts.

Here is my plymouth start service:

Code: Select all
Description=Show Plymouth-lite Start Screen

ExecStart=/usr/bin/echo 0 > /sys.class/graphics/fbcon/cursor_blink ; /usr/bin/e$


My emulator service:

Code: Select all
Description=Starts SNES Emulator
DefaultDependencies=false            # Very important! Without this line, the s$
                                     # would wait until networking.service
                                     # has finished initialization. This could $
                                     # more seconds because of DHCP, IP attribu$



And the results of systemd-analyse blame:

Code: Select all
[root@alarmpi ~]# systemd-analyze blame
     1.229s dev-mmcblk0p2.device
      641ms plymouth-lite-start.service
      633ms mnt-retrode.mount
      459ms systemd-timesyncd.service
      328ms systemd-udev-trigger.service
      325ms systemd-journald.service
      252ms systemd-resolved.service
      212ms user@0.service
      174ms dev-mqueue.mount
      159ms kmod-static-nodes.service
      150ms systemd-remount-fs.service
      145ms systemd-tmpfiles-setup-dev.service
      142ms systemd-networkd.service
      126ms systemd-sysctl.service
      124ms systemd-modules-load.service
      116ms systemd-udevd.service
      100ms sys-kernel-debug.mount
      90ms systemd-journal-flush.service
      78ms systemd-logind.service
      75ms tmp.mount
      72ms sys-kernel-config.mount
      62ms systemd-update-utmp.service
      56ms systemd-tmpfiles-setup.service
      49ms systemd-random-seed.service
      40ms boot.mount
      38ms systemd-user-sessions.service

As you can see, the plymouth service should be starting immediately after the SD card is mounted, so I'm unsure why the splash screen isn't displayed sooner.

Many thanks in advance for any help!
Posts: 28
Joined: Wed Apr 16, 2014 8:31 pm

Return to Raspberry Pi

Who is online

Users browsing this forum: No registered users and 1 guest