Today I installed arch on an 32GB sdcard according to this instructions.
https://archlinuxarm.org/platforms/armv6/raspberry-pi
Everything worked without any errors, but when I can't boot from the sdcard. The leds on pi are both solid and I get no signal on the hdmi output.
I already tested out different power adapters and cables and reinstalled the OS.
This is the output from fdisk.
$this->bbcode_second_pass_code('', 'Disk /dev/sda: 29.5 GiB, 31657558016 bytes, 61831168 sectors
Disk model: STORAGE DEVICE
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x8dc2e6ec
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 206847 204800 100M c W95 FAT32 (LBA)
/dev/sda2 206848 61831167 61624320 29.4G 83 Linux
')
Does anyone have an idea or a suggestion what I can try next? Unfortunately I don't have a second sd card, but I already used this one with another OS.