Some problems with archlinux with raspberry

[inter1908]

Hi,
I have installed archlinux on my Raspberry, but i have some problems. In order:
- I don't know how modify the Keyboard in IT
- I use the HDMi for see the prompt but ... it is on the left of monitor and I don't see it ( I don't see the first x caracter for each rows )
- I don't wont insert the login at each start-up;

Can you help me?

Thanks

[dpws]

First of all:
viewtopic.php?f=31&t=2558

$this->bbcode_second_pass_quote('', '-') I don't know how modify the Keyboard in IT
- I use the HDMi for see the prompt but ... it is on the left of monitor and I don't see it ( I don't see the first x caracter for each rows )
- I don't wont insert the login at each start-up;

[inter1908]

I don't try tu change the config of HDMI because I use the Raspberry via telnet/ftp... but I have noise to configure telnet without the first columun on the sx.

In every case i have two new problems:
- Is possible that RaspberryPi go in standby? Is possible disabilitate? Or my Rasberry crash?
- I have downloaded the SO ArchLinux from Raspberry repository ( iso ) and i have installed it ( with windows ) on SD 8GB but I see only 2GB...
$this->bbcode_second_pass_code('', '[root@RASPBERRY-PI root]# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 1.8G 1.3G 345M 80% /
/dev/root 1.8G 1.3G 345M 80% /
devtmpfs 108M 0 108M 0% /dev
run 108M 184K 108M 1% /run
shm 108M 0 108M 0% /dev/shm
/dev/mmcblk0p1 94M 36M 59M 38% /boot
[root@RASPBERRY-PI root]#')
Why?
Thanks

[pepedog]

viewtopic.php?f=31&t=3119

[inter1908]

I have executed the procedure in the last post but i'm blocked at fase:

Edit /etc/fstab to reflect your new partition system and avoid fsck and sysvinit problems on reboot.

I don't know how modify it.

Thanks

[pepedog]

Try it without that step first.
If you need to still do that, then
nano /etc/fstab

[inter1908]

I have this situation:

$this->bbcode_second_pass_code('', '
[root@RASPBERRY-PI root]# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 7.2G 1.3G 5.6G 19% /
/dev/root 7.2G 1.3G 5.6G 19% /
devtmpfs 108M 0 108M 0% /dev
run 108M 188K 108M 1% /run
shm 108M 0 108M 0% /dev/shm
/dev/mmcblk0p1 94M 36M 59M 38% /boot
[root@RASPBERRY-PI root]#')

Is all ok?

[pepedog]

It looks like you have resized ok

[inter1908]

Thanks
About the standby?
In any case i see on my raspbery the led OK ( green ) ON and the raspeberry don't work ..

[pepedog]

I think you are asking this-
Has my pi gone into standby, or crashed?
I don't know, but before any halt or reboot, issue sync command