Hi everyone,
I had this posted on the ArchLinux forums but they closed it :(
I reopen it here again hoping for an answer. Thanks in advance!
---
I have a RaspberryPi2 with Arch Linux ARM installed.
I'm trying to configure a VPN Server on the Pi so I can connect securely from the outside to my local network and browse from there.
To do it I followed this tutorial http://readwrite.com/2014/04/10/raspber ... b-browsing
Everything was pretty straight forward and after finishing all the steps I was able to connect to my new VPN from my Android.
The problem is that once I'm connected I don't have access to the Internet. I can ping the Pi (192.168.10.12) and the Pi's VPN IP (10.8.0.1).
Other than that nothing. No ping to the router (192.168.10.1) or Google's DNS 8.8.8.8.
I already read these posts [SOLVED] Need help, OpenVPN not routing, [SOLVED] VPN routing issue - maybe my iptables and this one too OpenVPN issues, no access to internet after static ip configuration but unfortunately I'm still not able to solve it.
This is my configuration:
No firewall enabled
$ip addr
$this->bbcode_second_pass_quote('', '
') 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether b8:27:eb:45:38:22 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.12/24 brd 192.168.10.255 scope global dynamic eth0
valid_lft 50537sec preferred_lft 50537sec
inet6 fe56::ba27:ebff:fe96:3877/64 scope link
valid_lft forever preferred_lft forever
3: tun0@NONE: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 100
link/none
inet 10.8.0.1 peer 10.8.0.2/32 scope global tun0
valid_lft forever preferred_lft forever