NanoPi NEO

This forum is for supported devices using an ARMv7 Allwinner SoC.

NanoPi NEO

Postby SmartNOOB » Sat Aug 20, 2016 3:01 pm


I recently found the NanoPi NEO (, which is a nice computer for small embedded projects. The bad thing is that it only supports Ubuntu Core. The Debian community is currently creating a Debian edition and I was wondering if it would be possible to support it by Arch too. UBoot is supported and documented in their Wiki.
Would it be possible to run Arch on this device and what would I need to set it up on my own?

Code: Select all
    CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
    DDR3 RAM: 256MB/512MB
    Connectivity: 10/100M Ethernet
    USB Host: Type-A x 1, 2.54 mm pin x 2
    MicroSD Slot x 1
    MicroUSB: for data transmission and power input
    Debug Serial Port: 4Pin, 2.54 mm pitch pin header
    GPIO: 2.54mm pitch 36pin. It includes UART, SPI, I2C, IO etc
    PCB Dimension: 40 x 40 mm
    Power Supply: DC 5V/2A
    OS/Software: u-boot and UbuntuCore
Posts: 1
Joined: Sat Aug 20, 2016 2:56 pm

Return to Allwinner

Who is online

Users browsing this forum: No registered users and 1 guest