Hi,
I followed the installation instructions for Cubieboard2 and booted the SD card successfully. However, I want to run the mainline kernel. After upgrading the system with pacman -Syu and rebooting, I installed linux-armv7. It warned something using an updated uboot, but I assume that pacman took care of that. After reboot I can see only one core active.
Do I need to configure something else or the mainline kernel is unable to use the second core?
Thank you.
Cubieboard2 - Only one core detected on mainline kernel
7 posts
• Page 1 of 1
Cubieboard2 - Only one core detected on mainline kernel
by silvik » Tue Jan 06, 2015 4:36 pm
- silvik
- Posts: 4
- Joined: Tue Jan 06, 2015 4:28 pm
Re: Cubieboard2 - Only one core detected on mainline kernel
by WarheadsSE » Wed Jan 07, 2015 1:41 pm
pacman does NOT take care of that. You still have to burn the bootloader to your media of choice.
- WarheadsSE
- Developer
- Posts: 6807
- Joined: Mon Oct 18, 2010 2:12 pm
Re: Cubieboard2 - Only one core detected on mainline kernel
by silvik » Thu Jan 08, 2015 12:41 am
So a pacman -S uboot-cubieboard2 should do it, right?
Thanks, I hope it'll work.
Thanks, I hope it'll work.
- silvik
- Posts: 4
- Joined: Tue Jan 06, 2015 4:28 pm
Re: Cubieboard2 - Only one core detected on mainline kernel
by silvik » Thu Jan 08, 2015 1:34 am
Well, looks like pacman -S uboot-cubieboard2 is not the solution.
Any idea what should I try?
Thank you.
$this->bbcode_second_pass_code('', '
[root@alarm ~]# cat /sys/devices/system/cpu/cpu*/online
1
0
')
dmesg: Brought up 1 CPUs SMP: Total of 1 processors activated.
$this->bbcode_second_pass_code('', '
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.1-1-ARCH (nobody@root-chroot-copy) (gcc version 4.9.2 (GCC) ) #1 SMP Thu Dec 18 01:43:13 MST 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubieboard2
[ 0.000000] Ignoring memory range 0x40000000 - 0x48000000
[ 0.000000] cma: Reserved 16 MiB at 0x7f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 229376
[ 0.000000] free_area_init_node: node 0, pgdat c0f4e180, node_mem_map ef0f9000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34816 pages, LIFO batch:7
[ 0.000000] PERCPU: Embedded 11 pages/cpu @ef0ce000 s13760 r8192 d23104 u45056
[ 0.000000] pcpu-alloc: s13760 r8192 d23104 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227856
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait video=
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 1835008 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 874532K/917504K available (9739K kernel code, 1048K rwdata, 3900K rodata, 996K init, 918K bss, 42972K reserved, 122880K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0d5a1d0 (13641 kB)
.init : 0xc0d5b000 - 0xc0e54000 ( 996 kB)
.data : 0xc0e54000 - 0xc0f5a050 (1049 kB)
.bss : 0xc0f5a050 - 0xc103fa58 ( 919 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC physical location is 0x1c81000
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000021] Switching to timer-based delay loop, resolution 41ns
[ 0.001667] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.002239] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.002576] Console: colour dummy device 80x30
[ 0.002607] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[ 0.002622] pid_max: default: 32768 minimum: 301
[ 0.002747] Security Framework initialized
[ 0.002949] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002962] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003759] Initializing cgroup subsys memory
[ 0.003800] Initializing cgroup subsys devices
[ 0.003816] Initializing cgroup subsys freezer
[ 0.003831] Initializing cgroup subsys net_cls
[ 0.003845] Initializing cgroup subsys blkio
[ 0.003858] Initializing cgroup subsys perf_event
[ 0.003873] Initializing cgroup subsys net_prio
[ 0.003958] CPU: Testing write buffer coherency: ok
[ 0.004004] ftrace: allocating 35896 entries in 106 pages
[ 0.059188] /cpus/cpu@0 missing clock-frequency property
[ 0.059218] /cpus/cpu@1 missing clock-frequency property
[ 0.059232] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.059319] Setting up static identity map for 0x488bc218 - 0x488bc2b0
[ 0.065896] Brought up 1 CPUs
[ 0.065912] SMP: Total of 1 processors activated.
[ 0.065920] CPU: All CPU(s) started in SVC mode.
[ 0.066612] devtmpfs: initialized
[ 0.071108] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.079131] xor: measuring software checksum speed
[ 0.129044] arm4regs : 1214.400 MB/sec
[ 0.179106] 8regs : 720.000 MB/sec
[ 0.229166] 32regs : 889.600 MB/sec
[ 0.279225] neon : 704.000 MB/sec
[ 0.279234] xor: using function: arm4regs (1214.400 MB/sec)
[ 0.279395] pinctrl core: initialized pinctrl subsystem
[ 0.279879] regulator-dummy: no parameters
[ 0.285967] NET: Registered protocol family 16
[ 0.287772] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.289587] cpuidle: using governor ladder
[ 0.289610] cpuidle: using governor menu
[ 0.296012] No ATAGs?
[ 0.296050] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.296062] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.296218] EXYNOS: PMU not supported
[ 0.394869] raid6: int32x1 112 MB/s
[ 0.480017] raid6: int32x2 152 MB/s
[ 0.565104] raid6: int32x4 133 MB/s
[ 0.650157] raid6: int32x8 121 MB/s
[ 0.735219] raid6: neonx1 449 MB/s
[ 0.820349] raid6: neonx2 610 MB/s
[ 0.905453] raid6: neonx4 618 MB/s
[ 0.990684] raid6: neonx8 450 MB/s
[ 0.990692] raid6: using algorithm neonx4 (618 MB/s)
[ 0.990699] raid6: using intx1 recovery algorithm
[ 0.992867] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
[ 0.992894] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.992922] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.992937] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.992959] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.992973] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.993184] vcc3v0: 3000 mV
[ 0.993451] vcc3v3: 3300 mV
[ 0.993680] vcc5v0: 5000 mV
[ 0.996145] vgaarb: loaded
[ 0.997238] SCSI subsystem initialized
[ 0.997559] libata version 3.00 loaded.
[ 0.997916] usbcore: registered new interface driver usbfs
[ 0.997990] usbcore: registered new interface driver hub
[ 0.998119] usbcore: registered new device driver usb
[ 0.999389] media: Linux media interface: v0.10
[ 0.999455] Linux video capture interface: v2.00
[ 0.999577] pps_core: LinuxPPS API ver. 1 registered
[ 0.999586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.999616] PTP clock support registered
[ 0.999706] EDAC MC: Ver: 3.0.0
[ 1.001082] exynos_iommu_init: Failed to register exynos-iommu driver.
[ 1.001632] Advanced Linux Sound Architecture Driver Initialized.
[ 1.002377] NetLabel: Initializing
[ 1.002388] NetLabel: domain hash size = 128
[ 1.002394] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.002465] NetLabel: unlabeled traffic allowed by default
[ 1.002803] Switched to clocksource arch_sys_counter
[ 1.065288] NET: Registered protocol family 2
[ 1.066304] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.066392] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.066513] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.066586] TCP: reno registered
[ 1.066601] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.066654] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.066936] NET: Registered protocol family 1
[ 1.067410] RPC: Registered named UNIX socket transport module.
[ 1.067423] RPC: Registered udp transport module.
[ 1.067429] RPC: Registered tcp transport module.
[ 1.067436] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.067463] PCI: CLS 0 bytes, default 64
[ 1.068485] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 1.070811] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.079567] zpool: loaded
[ 1.079588] zbud: loaded
[ 1.080365] VFS: Disk quotas dquot_6.5.2
[ 1.080563] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.082633] NFS: Registering the id_resolver key type
[ 1.082696] Key type id_resolver registered
[ 1.082704] Key type id_legacy registered
[ 1.082729] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.083710] msgmni has been set to 1468
[ 1.086027] bounce: pool size: 64 pages
[ 1.086288] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.086524] io scheduler noop registered
[ 1.086540] io scheduler deadline registered
[ 1.086738] io scheduler cfq registered (default)
[ 1.088011] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 1.092598] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 1.163417] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.166016] console [ttyS0] disabled
[ 1.186283] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 2.026302] console [ttyS0] enabled
[ 2.030505] Serial: IMX driver
[ 2.034353] serial: Freescale lpuart driver
[ 2.038807] [drm] Initialized drm 1.1.0 20060810
[ 2.048819] loop: module loaded
[ 2.053616] Loading iSCSI transport class v2.0-870.
[ 2.059070] iscsi: registered transport (tcp)
[ 2.064360] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 2.077008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.083606] ehci-pci: EHCI PCI platform driver
[ 2.088141] ehci-platform: EHCI generic platform driver
[ 2.093605] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 2.100948] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 2.108292] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.113670] ehci-orion: EHCI orion driver
[ 2.117817] ehci-exynos: EHCI EXYNOS driver
[ 2.122142] tegra-ehci: Tegra EHCI driver
[ 2.126302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.132529] ohci-pci: OHCI PCI platform driver
[ 2.137067] ohci-platform: OHCI generic platform driver
[ 2.142461] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[ 2.149786] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[ 2.157099] ohci-exynos: OHCI EXYNOS driver
[ 2.161443] ohci-omap3: OHCI OMAP3 driver
[ 2.165653] usbcore: registered new interface driver uas
[ 2.171074] usbcore: registered new interface driver usb-storage
[ 2.177162] usbcore: registered new interface driver ums-cypress
[ 2.183238] usbcore: registered new interface driver ums-freecom
[ 2.189309] usbcore: registered new interface driver ums-isd200
[ 2.195290] usbcore: registered new interface driver ums-usbat
[ 2.204635] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 2.211475] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 2.216328] i2c /dev entries driver
[ 2.225203] axp20x-regulator axp20x-regulator: regulators node not found
[ 2.232219] LDO1: 1300 mV
[ 2.235463] LDO2: at 3000 mV
[ 2.238917] LDO3: at 2275 mV
[ 2.242088] LDO4: at 2800 mV
[ 2.245507] LDO5: at 2800 mV
[ 2.248925] DCDC2: at 1400 mV
[ 2.252449] DCDC3: at 1300 mV
[ 2.255629] axp20x 0-0034: AXP20X driver loaded
[ 2.264535] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
[ 2.273992] sdhci: Secure Digital Host Controller Interface driver
[ 2.280204] sdhci: Copyright(c) Pierre Ossman
[ 2.285104] Synopsys Designware Multimedia Card Interface Driver
[ 2.291950] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 2.298116] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 2.328100] sunxi-mmc 1c0f000.mmc: base:0xf00ae000 irq:64
[ 2.333744] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.344010] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.350947] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.356966] usbcore: registered new interface driver usbhid
[ 2.362590] usbhid: USB HID core driver
[ 2.367414] ashmem: initialized
[ 2.377012] oprofile: using timer interrupt.
[ 2.381659] TCP: cubic registered
[ 2.385859] NET: Registered protocol family 10
[ 2.391572] mip6: Mobile IPv6
[ 2.394651] NET: Registered protocol family 17
[ 2.399295] Key type dns_resolver registered
[ 2.403854] ThumbEE CPU extension supported.
[ 2.408202] Registering SWP/SWPB emulation handler
[ 2.414003] registered taskstats version 1
[ 2.421297] Btrfs loaded
[ 2.424986] ahci-5v: 5000 mV
[ 2.428092] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.436697] usb1-vbus: 5000 mV
[ 2.440423] usb2-vbus: 5000 mV
[ 2.446459] mmc0: new high speed SDHC card at address 59b4
[ 2.452583] mmcblk0: mmc0:59b4 SD 7.35 GiB
[ 2.459009] mmcblk0: p1
[ 2.482856] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 2.490366] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 2.496264] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.505237] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 2.514328] scsi host0: ahci_platform
[ 2.518429] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 2.527446] ehci-platform 1c14000.usb: EHCI Host Controller
[ 2.533453] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 2.541478] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 2.552802] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 2.559133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.565937] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.573166] usb usb1: Product: EHCI Host Controller
[ 2.578052] usb usb1: Manufacturer: Linux 3.18.1-1-ARCH ehci_hcd
[ 2.584064] usb usb1: SerialNumber: 1c14000.usb
[ 2.589361] hub 1-0:1.0: USB hub found
[ 2.593229] hub 1-0:1.0: 1 port detected
[ 2.598557] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 2.604547] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 2.612573] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 2.627822] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 2.634153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.640960] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.648189] usb usb2: Product: EHCI Host Controller
[ 2.653075] usb usb2: Manufacturer: Linux 3.18.1-1-ARCH ehci_hcd
[ 2.659086] usb usb2: SerialNumber: 1c1c000.usb
[ 2.664385] hub 2-0:1.0: USB hub found
[ 2.668249] hub 2-0:1.0: 1 port detected
[ 2.673621] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 2.680644] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 2.688628] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
[ 2.752011] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.758829] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.766059] usb usb3: Product: Generic Platform OHCI controller
[ 2.771993] usb usb3: Manufacturer: Linux 3.18.1-1-ARCH ohci_hcd
[ 2.778005] usb usb3: SerialNumber: 1c14400.usb
[ 2.784392] hub 3-0:1.0: USB hub found
[ 2.788268] hub 3-0:1.0: 1 port detected
[ 2.793596] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 2.800638] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 2.808662] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
[ 2.872037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.878847] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.886074] usb usb4: Product: Generic Platform OHCI controller
[ 2.892013] usb usb4: Manufacturer: Linux 3.18.1-1-ARCH ohci_hcd
[ 2.898028] usb usb4: SerialNumber: 1c1c400.usb
[ 2.903471] hub 4-0:1.0: USB hub found
[ 2.907270] hub 4-0:1.0: 1 port detected
[ 2.912588] sunxi-rtc 1c20d00.rtc: setting system clock to 2015-01-08 01:24:21 UTC (1420680261)
[ 2.921413] sr_init: No PMIC hook to init smartreflex
[ 2.926625] sr_init: platform driver register failed for SR
[ 2.938143] Unable to find PPMU node
[ 2.941755] exynos5-bus-int: probe of exynos5-bus-int failed with error -2
[ 2.948748] PM: Hibernation image not present or could not be loaded.
[ 2.948778] vcc5v0: disabling
[ 2.951745] vcc3v0: disabling
[ 2.954864] ALSA device list:
[ 2.957883] No soundcards found.
[ 5.322818] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.339934] ata1.00: ATA-8: HITACHI HTS545050B9A300, PB4ZC6ZH, max UDMA/100
[ 5.346911] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.354895] ata1.00: configured for UDMA/100
[ 5.359687] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54505 C6ZH PQ: 0 ANSI: 5
[ 5.368815] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.376888] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.382602] sd 0:0:0:0: [sda] Write Protect is off
[ 5.387426] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.387982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.417230] sda: sda3
[ 5.420904] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.426847] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[ 5.436069] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[ 5.461736] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.469944] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 5.480730] devtmpfs: mounted
[ 5.485593] Freeing unused kernel memory: 996K (c0d5b000 - c0e54000)
[ 5.759964] random: systemd urandom read with 17 bits of entropy available
[ 5.788149] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 5.806642] systemd[1]: Detected architecture 'arm'.
[ 5.829634] systemd[1]: Set hostname to <alarm>.
[ 6.132974] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 6.269546] usb 2-1: New USB device found, idVendor=14cd, idProduct=6116
[ 6.276333] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 6.283484] usb 2-1: Product: USB Mass Storage Device
[ 6.288553] usb 2-1: Manufacturer: Generic
[ 6.293097] usb 2-1: SerialNumber: 116AC2101219
[ 6.299335] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 6.309009] scsi host1: usb-storage 2-1:1.0
[ 6.344082] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 6.364353] systemd[1]: Starting Remote File Systems.
[ 6.378007] systemd[1]: Reached target Remote File Systems.
[ 6.383882] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.391984] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.399794] systemd[1]: Expecting device dev-ttyS0.device...
[ 6.413149] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.437975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.447699] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.456141] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.464282] systemd[1]: Starting Encrypted Volumes.
[ 6.477957] systemd[1]: Reached target Encrypted Volumes.
[ 6.483572] systemd[1]: Starting Paths.
[ 6.497943] systemd[1]: Reached target Paths.
[ 6.502444] systemd[1]: Starting Swap.
[ 6.517936] systemd[1]: Reached target Swap.
[ 6.522371] systemd[1]: Starting Root Slice.
[ 6.538005] systemd[1]: Created slice Root Slice.
[ 6.543076] systemd[1]: Starting System Slice.
[ 6.558006] systemd[1]: Created slice System Slice.
[ 6.563199] systemd[1]: Starting system-getty.slice.
[ 6.577996] systemd[1]: Created slice system-getty.slice.
[ 6.583695] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 6.597993] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 6.604589] systemd[1]: Starting Journal Socket.
[ 6.617984] systemd[1]: Listening on Journal Socket.
[ 6.623793] systemd[1]: Mounting Debug File System...
[ 6.641476] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.670867] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.698823] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.737325] systemd[1]: Mounted Huge Pages File System.
[ 6.747241] systemd[1]: Starting Setup Virtual Console...
[ 6.783613] systemd[1]: Started Load Kernel Modules.
[ 6.793302] systemd[1]: Mounted FUSE Control File System.
[ 6.804002] systemd[1]: Starting Apply Kernel Variables...
[ 6.821753] systemd[1]: Starting Journal Socket (/dev/log).
[ 6.843122] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.849924] systemd[1]: Starting LVM2 metadata daemon socket.
[ 6.868124] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 6.921319] systemd[1]: Listening on Journal Audit Socket.
[ 6.927624] systemd[1]: Starting udev Kernel Socket.
[ 6.948065] systemd[1]: Listening on udev Kernel Socket.
[ 6.953728] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.967979] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.973967] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 6.987969] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.994752] systemd[1]: Starting User and Session Slice.
[ 7.012995] systemd[1]: Created slice User and Session Slice.
[ 7.019010] systemd[1]: Starting Slices.
[ 7.032949] systemd[1]: Reached target Slices.
[ 7.038185] systemd[1]: Mounted Configuration File System.
[ 7.043941] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.061551] systemd[1]: Mounting Temporary Directory...
[ 7.088947] systemd[1]: Starting Journal Service...
[ 7.116986] systemd[1]: Starting udev Control Socket.
[ 7.138295] systemd[1]: Listening on udev Control Socket.
[ 7.144917] systemd[1]: Starting udev Coldplug all Devices...
[ 7.169144] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.193145] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.228154] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.263201] systemd[1]: Mounted Debug File System.
[ 7.288114] systemd[1]: Mounted Temporary Directory.
[ 7.308186] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.316262] scsi 1:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0
[ 7.334599] sd 1:0:0:0: [sdb] 312581806 512-byte logical blocks: (160 GB/149 GiB)
[ 7.350182] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.358500] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.363676] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 7.371623] sd 1:0:0:0: [sdb] No Caching mode page found
[ 7.377063] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 7.383868] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.418292] systemd[1]: Started Setup Virtual Console.
[ 7.436913] sdb: sdb1
[ 7.443133] systemd[1]: Started Apply Kernel Variables.
[ 7.449653] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 7.883108] systemd[1]: Started udev Coldplug all Devices.
[ 8.287926] systemd[1]: Starting Load/Save Random Seed...
[ 8.312135] systemd[1]: Started First Boot Wizard.
[ 8.332582] systemd[1]: Started Create System Users.
[ 8.347602] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.381953] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 8.404645] systemd[1]: Started Rebuild Hardware Database.
[ 8.428760] systemd[1]: Started Journal Service.
[ 8.709625] systemd-journald[101]: Received request to flush runtime journal from PID 1
[ 8.932570] random: nonblocking pool is initialized
[ 12.720927] stmmaceth 1c50000.ethernet: no regulator found
[ 12.840067] stmmaceth 1c50000.ethernet: no reset control found
[ 12.902546] Ring mode enabled
[ 12.905735] No HW DMA feature register supported
[ 12.910315] Normal descriptors
[ 12.913675] TX Checksum insertion supported
[ 13.043495] libphy: stmmac: probed
[ 13.046932] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active
[ 16.283872] RX IPC Checksum Offload disabled
[ 16.288264] No MAC Management Counters available
[ 18.273068] stmmaceth 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
')
Any idea what should I try?
Thank you.
$this->bbcode_second_pass_code('', '
[root@alarm ~]# cat /sys/devices/system/cpu/cpu*/online
1
0
')
dmesg: Brought up 1 CPUs SMP: Total of 1 processors activated.
$this->bbcode_second_pass_code('', '
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.1-1-ARCH (nobody@root-chroot-copy) (gcc version 4.9.2 (GCC) ) #1 SMP Thu Dec 18 01:43:13 MST 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubieboard2
[ 0.000000] Ignoring memory range 0x40000000 - 0x48000000
[ 0.000000] cma: Reserved 16 MiB at 0x7f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 229376
[ 0.000000] free_area_init_node: node 0, pgdat c0f4e180, node_mem_map ef0f9000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34816 pages, LIFO batch:7
[ 0.000000] PERCPU: Embedded 11 pages/cpu @ef0ce000 s13760 r8192 d23104 u45056
[ 0.000000] pcpu-alloc: s13760 r8192 d23104 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227856
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait video=
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 1835008 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 874532K/917504K available (9739K kernel code, 1048K rwdata, 3900K rodata, 996K init, 918K bss, 42972K reserved, 122880K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0d5a1d0 (13641 kB)
.init : 0xc0d5b000 - 0xc0e54000 ( 996 kB)
.data : 0xc0e54000 - 0xc0f5a050 (1049 kB)
.bss : 0xc0f5a050 - 0xc103fa58 ( 919 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC physical location is 0x1c81000
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000021] Switching to timer-based delay loop, resolution 41ns
[ 0.001667] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.002239] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.002576] Console: colour dummy device 80x30
[ 0.002607] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[ 0.002622] pid_max: default: 32768 minimum: 301
[ 0.002747] Security Framework initialized
[ 0.002949] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002962] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003759] Initializing cgroup subsys memory
[ 0.003800] Initializing cgroup subsys devices
[ 0.003816] Initializing cgroup subsys freezer
[ 0.003831] Initializing cgroup subsys net_cls
[ 0.003845] Initializing cgroup subsys blkio
[ 0.003858] Initializing cgroup subsys perf_event
[ 0.003873] Initializing cgroup subsys net_prio
[ 0.003958] CPU: Testing write buffer coherency: ok
[ 0.004004] ftrace: allocating 35896 entries in 106 pages
[ 0.059188] /cpus/cpu@0 missing clock-frequency property
[ 0.059218] /cpus/cpu@1 missing clock-frequency property
[ 0.059232] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.059319] Setting up static identity map for 0x488bc218 - 0x488bc2b0
[ 0.065896] Brought up 1 CPUs
[ 0.065912] SMP: Total of 1 processors activated.
[ 0.065920] CPU: All CPU(s) started in SVC mode.
[ 0.066612] devtmpfs: initialized
[ 0.071108] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.079131] xor: measuring software checksum speed
[ 0.129044] arm4regs : 1214.400 MB/sec
[ 0.179106] 8regs : 720.000 MB/sec
[ 0.229166] 32regs : 889.600 MB/sec
[ 0.279225] neon : 704.000 MB/sec
[ 0.279234] xor: using function: arm4regs (1214.400 MB/sec)
[ 0.279395] pinctrl core: initialized pinctrl subsystem
[ 0.279879] regulator-dummy: no parameters
[ 0.285967] NET: Registered protocol family 16
[ 0.287772] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.289587] cpuidle: using governor ladder
[ 0.289610] cpuidle: using governor menu
[ 0.296012] No ATAGs?
[ 0.296050] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.296062] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.296218] EXYNOS: PMU not supported
[ 0.394869] raid6: int32x1 112 MB/s
[ 0.480017] raid6: int32x2 152 MB/s
[ 0.565104] raid6: int32x4 133 MB/s
[ 0.650157] raid6: int32x8 121 MB/s
[ 0.735219] raid6: neonx1 449 MB/s
[ 0.820349] raid6: neonx2 610 MB/s
[ 0.905453] raid6: neonx4 618 MB/s
[ 0.990684] raid6: neonx8 450 MB/s
[ 0.990692] raid6: using algorithm neonx4 (618 MB/s)
[ 0.990699] raid6: using intx1 recovery algorithm
[ 0.992867] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
[ 0.992894] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.992922] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.992937] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.992959] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.992973] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.993184] vcc3v0: 3000 mV
[ 0.993451] vcc3v3: 3300 mV
[ 0.993680] vcc5v0: 5000 mV
[ 0.996145] vgaarb: loaded
[ 0.997238] SCSI subsystem initialized
[ 0.997559] libata version 3.00 loaded.
[ 0.997916] usbcore: registered new interface driver usbfs
[ 0.997990] usbcore: registered new interface driver hub
[ 0.998119] usbcore: registered new device driver usb
[ 0.999389] media: Linux media interface: v0.10
[ 0.999455] Linux video capture interface: v2.00
[ 0.999577] pps_core: LinuxPPS API ver. 1 registered
[ 0.999586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.999616] PTP clock support registered
[ 0.999706] EDAC MC: Ver: 3.0.0
[ 1.001082] exynos_iommu_init: Failed to register exynos-iommu driver.
[ 1.001632] Advanced Linux Sound Architecture Driver Initialized.
[ 1.002377] NetLabel: Initializing
[ 1.002388] NetLabel: domain hash size = 128
[ 1.002394] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.002465] NetLabel: unlabeled traffic allowed by default
[ 1.002803] Switched to clocksource arch_sys_counter
[ 1.065288] NET: Registered protocol family 2
[ 1.066304] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.066392] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.066513] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.066586] TCP: reno registered
[ 1.066601] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.066654] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.066936] NET: Registered protocol family 1
[ 1.067410] RPC: Registered named UNIX socket transport module.
[ 1.067423] RPC: Registered udp transport module.
[ 1.067429] RPC: Registered tcp transport module.
[ 1.067436] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.067463] PCI: CLS 0 bytes, default 64
[ 1.068485] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 1.070811] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.079567] zpool: loaded
[ 1.079588] zbud: loaded
[ 1.080365] VFS: Disk quotas dquot_6.5.2
[ 1.080563] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.082633] NFS: Registering the id_resolver key type
[ 1.082696] Key type id_resolver registered
[ 1.082704] Key type id_legacy registered
[ 1.082729] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.083710] msgmni has been set to 1468
[ 1.086027] bounce: pool size: 64 pages
[ 1.086288] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.086524] io scheduler noop registered
[ 1.086540] io scheduler deadline registered
[ 1.086738] io scheduler cfq registered (default)
[ 1.088011] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 1.092598] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 1.163417] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.166016] console [ttyS0] disabled
[ 1.186283] dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 2.026302] console [ttyS0] enabled
[ 2.030505] Serial: IMX driver
[ 2.034353] serial: Freescale lpuart driver
[ 2.038807] [drm] Initialized drm 1.1.0 20060810
[ 2.048819] loop: module loaded
[ 2.053616] Loading iSCSI transport class v2.0-870.
[ 2.059070] iscsi: registered transport (tcp)
[ 2.064360] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 2.077008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.083606] ehci-pci: EHCI PCI platform driver
[ 2.088141] ehci-platform: EHCI generic platform driver
[ 2.093605] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 2.100948] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 2.108292] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.113670] ehci-orion: EHCI orion driver
[ 2.117817] ehci-exynos: EHCI EXYNOS driver
[ 2.122142] tegra-ehci: Tegra EHCI driver
[ 2.126302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.132529] ohci-pci: OHCI PCI platform driver
[ 2.137067] ohci-platform: OHCI generic platform driver
[ 2.142461] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[ 2.149786] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[ 2.157099] ohci-exynos: OHCI EXYNOS driver
[ 2.161443] ohci-omap3: OHCI OMAP3 driver
[ 2.165653] usbcore: registered new interface driver uas
[ 2.171074] usbcore: registered new interface driver usb-storage
[ 2.177162] usbcore: registered new interface driver ums-cypress
[ 2.183238] usbcore: registered new interface driver ums-freecom
[ 2.189309] usbcore: registered new interface driver ums-isd200
[ 2.195290] usbcore: registered new interface driver ums-usbat
[ 2.204635] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 2.211475] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 2.216328] i2c /dev entries driver
[ 2.225203] axp20x-regulator axp20x-regulator: regulators node not found
[ 2.232219] LDO1: 1300 mV
[ 2.235463] LDO2: at 3000 mV
[ 2.238917] LDO3: at 2275 mV
[ 2.242088] LDO4: at 2800 mV
[ 2.245507] LDO5: at 2800 mV
[ 2.248925] DCDC2: at 1400 mV
[ 2.252449] DCDC3: at 1300 mV
[ 2.255629] axp20x 0-0034: AXP20X driver loaded
[ 2.264535] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
[ 2.273992] sdhci: Secure Digital Host Controller Interface driver
[ 2.280204] sdhci: Copyright(c) Pierre Ossman
[ 2.285104] Synopsys Designware Multimedia Card Interface Driver
[ 2.291950] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 2.298116] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 2.328100] sunxi-mmc 1c0f000.mmc: base:0xf00ae000 irq:64
[ 2.333744] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.344010] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.350947] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.356966] usbcore: registered new interface driver usbhid
[ 2.362590] usbhid: USB HID core driver
[ 2.367414] ashmem: initialized
[ 2.377012] oprofile: using timer interrupt.
[ 2.381659] TCP: cubic registered
[ 2.385859] NET: Registered protocol family 10
[ 2.391572] mip6: Mobile IPv6
[ 2.394651] NET: Registered protocol family 17
[ 2.399295] Key type dns_resolver registered
[ 2.403854] ThumbEE CPU extension supported.
[ 2.408202] Registering SWP/SWPB emulation handler
[ 2.414003] registered taskstats version 1
[ 2.421297] Btrfs loaded
[ 2.424986] ahci-5v: 5000 mV
[ 2.428092] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.436697] usb1-vbus: 5000 mV
[ 2.440423] usb2-vbus: 5000 mV
[ 2.446459] mmc0: new high speed SDHC card at address 59b4
[ 2.452583] mmcblk0: mmc0:59b4 SD 7.35 GiB
[ 2.459009] mmcblk0: p1
[ 2.482856] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 2.490366] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 2.496264] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.505237] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 2.514328] scsi host0: ahci_platform
[ 2.518429] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 2.527446] ehci-platform 1c14000.usb: EHCI Host Controller
[ 2.533453] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 2.541478] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 2.552802] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 2.559133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.565937] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.573166] usb usb1: Product: EHCI Host Controller
[ 2.578052] usb usb1: Manufacturer: Linux 3.18.1-1-ARCH ehci_hcd
[ 2.584064] usb usb1: SerialNumber: 1c14000.usb
[ 2.589361] hub 1-0:1.0: USB hub found
[ 2.593229] hub 1-0:1.0: 1 port detected
[ 2.598557] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 2.604547] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 2.612573] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 2.627822] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 2.634153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.640960] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.648189] usb usb2: Product: EHCI Host Controller
[ 2.653075] usb usb2: Manufacturer: Linux 3.18.1-1-ARCH ehci_hcd
[ 2.659086] usb usb2: SerialNumber: 1c1c000.usb
[ 2.664385] hub 2-0:1.0: USB hub found
[ 2.668249] hub 2-0:1.0: 1 port detected
[ 2.673621] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 2.680644] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 2.688628] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
[ 2.752011] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.758829] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.766059] usb usb3: Product: Generic Platform OHCI controller
[ 2.771993] usb usb3: Manufacturer: Linux 3.18.1-1-ARCH ohci_hcd
[ 2.778005] usb usb3: SerialNumber: 1c14400.usb
[ 2.784392] hub 3-0:1.0: USB hub found
[ 2.788268] hub 3-0:1.0: 1 port detected
[ 2.793596] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 2.800638] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 2.808662] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
[ 2.872037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.878847] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.886074] usb usb4: Product: Generic Platform OHCI controller
[ 2.892013] usb usb4: Manufacturer: Linux 3.18.1-1-ARCH ohci_hcd
[ 2.898028] usb usb4: SerialNumber: 1c1c400.usb
[ 2.903471] hub 4-0:1.0: USB hub found
[ 2.907270] hub 4-0:1.0: 1 port detected
[ 2.912588] sunxi-rtc 1c20d00.rtc: setting system clock to 2015-01-08 01:24:21 UTC (1420680261)
[ 2.921413] sr_init: No PMIC hook to init smartreflex
[ 2.926625] sr_init: platform driver register failed for SR
[ 2.938143] Unable to find PPMU node
[ 2.941755] exynos5-bus-int: probe of exynos5-bus-int failed with error -2
[ 2.948748] PM: Hibernation image not present or could not be loaded.
[ 2.948778] vcc5v0: disabling
[ 2.951745] vcc3v0: disabling
[ 2.954864] ALSA device list:
[ 2.957883] No soundcards found.
[ 5.322818] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.339934] ata1.00: ATA-8: HITACHI HTS545050B9A300, PB4ZC6ZH, max UDMA/100
[ 5.346911] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.354895] ata1.00: configured for UDMA/100
[ 5.359687] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54505 C6ZH PQ: 0 ANSI: 5
[ 5.368815] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.376888] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.382602] sd 0:0:0:0: [sda] Write Protect is off
[ 5.387426] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.387982] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.417230] sda: sda3
[ 5.420904] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.426847] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[ 5.436069] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[ 5.461736] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.469944] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 5.480730] devtmpfs: mounted
[ 5.485593] Freeing unused kernel memory: 996K (c0d5b000 - c0e54000)
[ 5.759964] random: systemd urandom read with 17 bits of entropy available
[ 5.788149] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 5.806642] systemd[1]: Detected architecture 'arm'.
[ 5.829634] systemd[1]: Set hostname to <alarm>.
[ 6.132974] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 6.269546] usb 2-1: New USB device found, idVendor=14cd, idProduct=6116
[ 6.276333] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 6.283484] usb 2-1: Product: USB Mass Storage Device
[ 6.288553] usb 2-1: Manufacturer: Generic
[ 6.293097] usb 2-1: SerialNumber: 116AC2101219
[ 6.299335] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 6.309009] scsi host1: usb-storage 2-1:1.0
[ 6.344082] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 6.364353] systemd[1]: Starting Remote File Systems.
[ 6.378007] systemd[1]: Reached target Remote File Systems.
[ 6.383882] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.391984] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.399794] systemd[1]: Expecting device dev-ttyS0.device...
[ 6.413149] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.437975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.447699] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.456141] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.464282] systemd[1]: Starting Encrypted Volumes.
[ 6.477957] systemd[1]: Reached target Encrypted Volumes.
[ 6.483572] systemd[1]: Starting Paths.
[ 6.497943] systemd[1]: Reached target Paths.
[ 6.502444] systemd[1]: Starting Swap.
[ 6.517936] systemd[1]: Reached target Swap.
[ 6.522371] systemd[1]: Starting Root Slice.
[ 6.538005] systemd[1]: Created slice Root Slice.
[ 6.543076] systemd[1]: Starting System Slice.
[ 6.558006] systemd[1]: Created slice System Slice.
[ 6.563199] systemd[1]: Starting system-getty.slice.
[ 6.577996] systemd[1]: Created slice system-getty.slice.
[ 6.583695] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 6.597993] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 6.604589] systemd[1]: Starting Journal Socket.
[ 6.617984] systemd[1]: Listening on Journal Socket.
[ 6.623793] systemd[1]: Mounting Debug File System...
[ 6.641476] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.670867] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.698823] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.737325] systemd[1]: Mounted Huge Pages File System.
[ 6.747241] systemd[1]: Starting Setup Virtual Console...
[ 6.783613] systemd[1]: Started Load Kernel Modules.
[ 6.793302] systemd[1]: Mounted FUSE Control File System.
[ 6.804002] systemd[1]: Starting Apply Kernel Variables...
[ 6.821753] systemd[1]: Starting Journal Socket (/dev/log).
[ 6.843122] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.849924] systemd[1]: Starting LVM2 metadata daemon socket.
[ 6.868124] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 6.921319] systemd[1]: Listening on Journal Audit Socket.
[ 6.927624] systemd[1]: Starting udev Kernel Socket.
[ 6.948065] systemd[1]: Listening on udev Kernel Socket.
[ 6.953728] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.967979] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.973967] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 6.987969] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.994752] systemd[1]: Starting User and Session Slice.
[ 7.012995] systemd[1]: Created slice User and Session Slice.
[ 7.019010] systemd[1]: Starting Slices.
[ 7.032949] systemd[1]: Reached target Slices.
[ 7.038185] systemd[1]: Mounted Configuration File System.
[ 7.043941] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.061551] systemd[1]: Mounting Temporary Directory...
[ 7.088947] systemd[1]: Starting Journal Service...
[ 7.116986] systemd[1]: Starting udev Control Socket.
[ 7.138295] systemd[1]: Listening on udev Control Socket.
[ 7.144917] systemd[1]: Starting udev Coldplug all Devices...
[ 7.169144] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.193145] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.228154] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.263201] systemd[1]: Mounted Debug File System.
[ 7.288114] systemd[1]: Mounted Temporary Directory.
[ 7.308186] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.316262] scsi 1:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0
[ 7.334599] sd 1:0:0:0: [sdb] 312581806 512-byte logical blocks: (160 GB/149 GiB)
[ 7.350182] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.358500] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.363676] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 7.371623] sd 1:0:0:0: [sdb] No Caching mode page found
[ 7.377063] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 7.383868] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.418292] systemd[1]: Started Setup Virtual Console.
[ 7.436913] sdb: sdb1
[ 7.443133] systemd[1]: Started Apply Kernel Variables.
[ 7.449653] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 7.883108] systemd[1]: Started udev Coldplug all Devices.
[ 8.287926] systemd[1]: Starting Load/Save Random Seed...
[ 8.312135] systemd[1]: Started First Boot Wizard.
[ 8.332582] systemd[1]: Started Create System Users.
[ 8.347602] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.381953] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 8.404645] systemd[1]: Started Rebuild Hardware Database.
[ 8.428760] systemd[1]: Started Journal Service.
[ 8.709625] systemd-journald[101]: Received request to flush runtime journal from PID 1
[ 8.932570] random: nonblocking pool is initialized
[ 12.720927] stmmaceth 1c50000.ethernet: no regulator found
[ 12.840067] stmmaceth 1c50000.ethernet: no reset control found
[ 12.902546] Ring mode enabled
[ 12.905735] No HW DMA feature register supported
[ 12.910315] Normal descriptors
[ 12.913675] TX Checksum insertion supported
[ 13.043495] libphy: stmmac: probed
[ 13.046932] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active
[ 16.283872] RX IPC Checksum Offload disabled
[ 16.288264] No MAC Management Counters available
[ 18.273068] stmmaceth 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
')
- silvik
- Posts: 4
- Joined: Tue Jan 06, 2015 4:28 pm
Re: Cubieboard2 - Only one core detected on mainline kernel
by WarheadsSE » Thu Jan 08, 2015 2:44 am
$this->bbcode_second_pass_quote('WarheadsSE', 'p')acman does NOT take care of that. You still have to burn the bootloader to your media of choice.
- WarheadsSE
- Developer
- Posts: 6807
- Joined: Mon Oct 18, 2010 2:12 pm
Re: Cubieboard2 - Only one core detected on mainline kernel
by kmihelich » Thu Jan 08, 2015 2:56 am
Arch Linux ARM exists and continues to grow through community support, please donate today!
- kmihelich
- Developer
- Posts: 1133
- Joined: Tue Jul 20, 2010 6:55 am
- Location: aka leming #archlinuxarm
Re: Cubieboard2 - Only one core detected on mainline kernel
by silvik » Tue Jan 13, 2015 5:40 pm
I installed uboot-cubieboard2 from here https://github.com/archlinuxarm/PKGBUIL ... t-68583566, as instructed and I get this:
$this->bbcode_second_pass_code('', '
U-Boot 2015.01-0 (Jan 02 2015 - 21:30:30) Arch Linux ARM
CPU: Allwinner A20 (SUN7I)
I2C: ready
DRAM: 1016 MiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
Reserved 8192kB of RAM for Framebuffer.
In: serial
Out: serial
Err: serial
SCSI: SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: dwmac.1c50000
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0...
Found U-Boot script /boot/boot.scr
733 bytes read in 141 ms (4.9 KiB/s)
## Executing script at 43100000
Wrong image format for "source" command
SCRIPT FAILED: continuing...
scanning bus for devices...
Found 0 device(s).
SCSI device 0:
Device 0: not available
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
USB device 0: unknown device
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.200.126 (4 ms)
*** Warning: no boot file name; using 'C0A8C87E.img'
Using dwmac.1c50000 device
TFTP from server 192.168.200.200; our IP address is 192.168.200.126
Filename 'C0A8C87E.img'.
Load address: 0x42000000
Loading: T T T
')
It doesn't boot. If it matters, I did this: install arch, pacman -Syu, reboot, pacman -S linux-armv7, pacman -U uboot-cubieboard2-2015.01-0-armv7h.pkg.tar.xz, reboot.
What am I doing wrong?
$this->bbcode_second_pass_code('', '
U-Boot 2015.01-0 (Jan 02 2015 - 21:30:30) Arch Linux ARM
CPU: Allwinner A20 (SUN7I)
I2C: ready
DRAM: 1016 MiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
Reserved 8192kB of RAM for Framebuffer.
In: serial
Out: serial
Err: serial
SCSI: SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: dwmac.1c50000
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0...
Found U-Boot script /boot/boot.scr
733 bytes read in 141 ms (4.9 KiB/s)
## Executing script at 43100000
Wrong image format for "source" command
SCRIPT FAILED: continuing...
scanning bus for devices...
Found 0 device(s).
SCSI device 0:
Device 0: not available
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
USB device 0: unknown device
Speed: 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.200.126 (4 ms)
*** Warning: no boot file name; using 'C0A8C87E.img'
Using dwmac.1c50000 device
TFTP from server 192.168.200.200; our IP address is 192.168.200.126
Filename 'C0A8C87E.img'.
Load address: 0x42000000
Loading: T T T
')
It doesn't boot. If it matters, I did this: install arch, pacman -Syu, reboot, pacman -S linux-armv7, pacman -U uboot-cubieboard2-2015.01-0-armv7h.pkg.tar.xz, reboot.
What am I doing wrong?
- silvik
- Posts: 4
- Joined: Tue Jan 06, 2015 4:28 pm
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests