Boot hangs with "Failed to run main loop, freezing."

This forum is for supported devices using an ARMv7 Allwinner SoC.

Boot hangs with "Failed to run main loop, freezing."

Postby direx » Sun May 10, 2015 8:34 pm

I have just upgraded my Cubietruck to the latest systemd version and noticed that it is not booting any more. This is the boot output captured from a serial console:

$this->bbcode_second_pass_code('', '
[ OK ] Started udev Kernel Device Manager.
[ OK ] Found device /sys/subsystem/net/devices/eth0.
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Found device /dev/ttyS0.
[ OK ] Reached target Sound Card.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Login Service...
Starting Permit User Sessions...
[ OK ] Started D-Bus System Message Bus.
Starting D-Bus System Message Bus...
Starting A basic static ethernet connection...
[ OK ] Started hdparm settings.
Starting hdparm settings...
Starting Packet Filtering Framework...
<6>sunxi_gmac: probed
[ 12.746961] sunxi_gmac: probed
[ OK <6>eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
[ 12.757922] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
] Started Self Monitoring and Reporting Technology (SMART) Daemo<6>eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
[ 12.774736] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
n.
Starting Self Monitoring and Reporting Technology (SMART) Daemon...
[ OK ] Started Entropy Harvesting Daemon.
Starting Entropy Harvesting Daemon...
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.947596] ip_tables: (C) 2000-2006 Netfilter Core Team
[ OK ] Started Periodic Command Scheduler.
Starting Periodic Command Scheduler...
<6>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 13.053873] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>PHY: sunxi_gmac-0:00 - Link is Up[ 14.781471] PHY: sunxi_gmac-0:00 - Link is Up<c> - 1000/Full - 1000/Full<c>

[!!!!!!] Failed to run main loop, freezing.
<7>eth0: no IPv6 routers present
')

Any ideas how I can debug this? Systemd in debug mode does not output any more information, why it is freezing :(
direx
 
Posts: 5
Joined: Thu Jan 23, 2014 8:47 pm

Re: Boot hangs with "Failed to run main loop, freezing."

Postby ZagorTeNej » Thu May 14, 2015 11:06 am

I have similar problem on my cubietruck (but with mainline kernel):
1. Installation on SD card as described here: http://archlinuxarm.org/platforms/armv7/allwinner/cubietruck
2. System starts without problems
3. Software updated and mainline kernel installed with $this->bbcode_second_pass_code('', 'pacman -Syu linux-armv7')
4. After restart, system hangs with endless loop:
$this->bbcode_second_pass_code('', 'Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.3-1-ARCH (builduser@leming) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP Wed May 13 21:28:04 MDT 2015
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubietruck
[ 0.000000] cma: Reserved 16 MiB at 0xbe800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ee5d4000 s17024 r8192 d23936 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520530
[ 0.000000] Kernel command line: console=ttyS0,115200 root=PARTUUID=f83165cf-01 rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2036048K/2088960K available (10075K kernel code, 957K rwdata, 4116K rodata, 1040K init, 908K bss, 36528K reserved, 16384K cma-reserved, 1294336K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0de3fd4 (14192 kB)
[ 0.000000] .init : 0xc0de4000 - 0xc0ee8000 (1040 kB)
[ 0.000000] .data : 0xc0ee8000 - 0xc0fd74f0 ( 958 kB)
[ 0.000000] .bss : 0xc0fd74f0 - 0xc10ba510 ( 909 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC physical location is 0x1c81000
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000023] Switching to timer-based delay loop, resolution 41ns
[ 0.001895] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.003061] Console: colour dummy device 80x30
[ 0.003098] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[ 0.003114] pid_max: default: 32768 minimum: 301
[ 0.003239] Security Framework initialized
[ 0.003437] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003451] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004310] Initializing cgroup subsys blkio
[ 0.004340] Initializing cgroup subsys memory
[ 0.004380] Initializing cgroup subsys devices
[ 0.004398] Initializing cgroup subsys freezer
[ 0.004414] Initializing cgroup subsys net_cls
[ 0.004429] Initializing cgroup subsys perf_event
[ 0.004446] Initializing cgroup subsys net_prio
[ 0.004520] CPU: Testing write buffer coherency: ok
[ 0.004570] ftrace: allocating 36931 entries in 109 pages
[ 0.063109] /cpus/cpu@0 missing clock-frequency property
[ 0.063145] /cpus/cpu@1 missing clock-frequency property
[ 0.063160] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.063256] Setting up static identity map for 0x4090af08 - 0x4090afa0
[ 0.066600] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.066715] Brought up 2 CPUs
[ 0.066737] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.066745] CPU: All CPU(s) started in HYP mode.
[ 0.066751] CPU: Virtualization extensions available.
[ 0.067684] devtmpfs: initialized
[ 0.068928] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.070559] xor: measuring software checksum speed
[ 0.117761] arm4regs : 1214.400 MB/sec
[ 0.167829] 8regs : 720.000 MB/sec
[ 0.217894] 32regs : 889.600 MB/sec
[ 0.267962] neon : 704.800 MB/sec
[ 0.267972] xor: using function: arm4regs (1214.400 MB/sec)
[ 0.268130] pinctrl core: initialized pinctrl subsystem
[ 0.276784] NET: Registered protocol family 16
[ 0.278774] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.289719] No ATAGs?
[ 0.289776] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.289788] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.291681] Serial: AMBA PL011 UART driver
[ 0.398566] raid6: int32x1 112 MB/s
[ 0.483731] raid6: int32x2 152 MB/s
[ 0.568904] raid6: int32x4 133 MB/s
[ 0.653975] raid6: int32x8 121 MB/s
[ 0.739038] raid6: neonx1 449 MB/s
[ 0.824154] raid6: neonx2 610 MB/s
[ 0.909339] raid6: neonx4 618 MB/s
[ 0.994579] raid6: neonx8 450 MB/s
[ 0.994587] raid6: using algorithm neonx4 (618 MB/s)
[ 0.994595] raid6: using intx1 recovery algorithm
[ 0.997124] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
[ 0.997155] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.997191] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
[ 0.997206] platform usb0-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.997234] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.997248] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.997276] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.997290] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.998134] reg-fixed-voltage vmmc3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/vmmc3_pin@0, deferring probe
[ 0.998156] platform vmmc3: Driver reg-fixed-voltage requests probe deferral
[ 1.001849] vgaarb: loaded
[ 1.003131] SCSI subsystem initialized
[ 1.003857] usbcore: registered new interface driver usbfs
[ 1.003948] usbcore: registered new interface driver hub
[ 1.004030] usbcore: registered new device driver usb
[ 1.005499] media: Linux media interface: v0.10
[ 1.005566] Linux video capture interface: v2.00
[ 1.005679] pps_core: LinuxPPS API ver. 1 registered
[ 1.005688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.005718] PTP clock support registered
[ 1.005804] EDAC MC: Ver: 3.0.0
[ 1.007118] Advanced Linux Sound Architecture Driver Initialized.
[ 1.007956] NetLabel: Initializing
[ 1.007969] NetLabel: domain hash size = 128
[ 1.007975] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.008037] NetLabel: unlabeled traffic allowed by default
[ 1.008345] Switched to clocksource arch_sys_counter
[ 1.072641] NET: Registered protocol family 2
[ 1.073796] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.073896] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.074017] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.074102] TCP: reno registered
[ 1.074118] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.074179] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.074463] NET: Registered protocol family 1
[ 1.074910] RPC: Registered named UNIX socket transport module.
[ 1.074926] RPC: Registered udp transport module.
[ 1.074933] RPC: Registered tcp transport module.
[ 1.074939] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.075992] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 1.078517] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.087140] zpool: loaded
[ 1.087167] zbud: loaded
[ 1.087825] VFS: Disk quotas dquot_6.5.2
[ 1.088063] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.090178] NFS: Registering the id_resolver key type
[ 1.090248] Key type id_resolver registered
[ 1.090256] Key type id_legacy registered
[ 1.090284] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.093161] bounce: pool size: 64 pages
[ 1.093479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.093670] io scheduler noop registered
[ 1.093688] io scheduler deadline registered
[ 1.093882] io scheduler cfq registered (default)
[ 1.095280] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 1.100674] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 1.172863] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.176327] console [ttyS0] disabled
[ 1.196564] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A
[ 2.043503] console [ttyS0] enabled
[ 2.047525] Serial: AMBA driver
[ 2.052292] [drm] Initialized drm 1.1.0 20060810
[ 2.064969] loop: module loaded
[ 2.069815] Loading iSCSI transport class v2.0-870.
[ 2.075373] iscsi: registered transport (tcp)
[ 2.080802] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 2.094245] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.100833] ehci-pci: EHCI PCI platform driver
[ 2.105389] ehci-platform: EHCI generic platform driver
[ 2.110883] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 2.118248] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 2.125621] ehci-mxc: Freescale On-Chip EHCI Host driver
[ 2.131067] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.136432] ehci-orion: EHCI orion driver
[ 2.140577] ehci-exynos: EHCI EXYNOS driver
[ 2.144906] tegra-ehci: Tegra EHCI driver
[ 2.149070] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.155298] ohci-pci: OHCI PCI platform driver
[ 2.159832] ohci-platform: OHCI generic platform driver
[ 2.165261] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[ 2.172611] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[ 2.179964] ohci-exynos: OHCI EXYNOS driver
[ 2.184335] ohci-omap3: OHCI OMAP3 driver
[ 2.188573] usbcore: registered new interface driver uas
[ 2.193991] usbcore: registered new interface driver usb-storage
[ 2.200061] usbcore: registered new interface driver ums-cypress
[ 2.206131] usbcore: registered new interface driver ums_eneub6250
[ 2.212369] usbcore: registered new interface driver ums-freecom
[ 2.218446] usbcore: registered new interface driver ums-isd200
[ 2.224424] usbcore: registered new interface driver ums-usbat
[ 2.235630] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 2.242479] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 2.247378] i2c /dev entries driver
[ 2.252469] axp20x 0-0034: AXP20x variant AXP209 found
[ 2.265877] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
[ 2.279823] axp20x 0-0034: AXP20X driver loaded
[ 2.290746] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
[ 2.299895] Driver 'mmcblk' needs updating - please use bus_type methods
[ 2.306711] sdhci: Secure Digital Host Controller Interface driver
[ 2.312905] sdhci: Copyright(c) Pierre Ossman
[ 2.317874] Synopsys Designware Multimedia Card Interface Driver
[ 2.324993] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 2.331294] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 2.363649] sunxi-mmc 1c0f000.mmc: base:0xf00ae000 irq:26
[ 2.369738] platform 1c12000.mmc: Driver sunxi-mmc requests probe deferral
[ 2.376861] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.384421] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.391439] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.397570] usbcore: registered new interface driver usbhid
[ 2.403201] usbhid: USB HID core driver
[ 2.407642] ashmem: initialized
[ 2.418272] oprofile: using timer interrupt.
[ 2.422925] TCP: cubic registered
[ 2.427055] NET: Registered protocol family 10
[ 2.432944] mip6: Mobile IPv6
[ 2.436067] NET: Registered protocol family 17
[ 2.440677] Key type dns_resolver registered
[ 2.441731] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.444082] mmc0: new high speed SDHC card at address 0001
[ 2.444776] mmcblk0: mmc0:0001 00000 29.2 GiB
[ 2.464275] mmcblk0: p1
[ 2.464767] ThumbEE CPU extension supported.
[ 2.464793] Registering SWP/SWPB emulation handler
[ 2.465780] registered taskstats version 1
[ 2.481293] Btrfs loaded
[ 2.528424] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 2.536018] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
[ 2.543200] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.552172] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
[ 2.561941] scsi host0: ahci-sunxi
[ 2.565804] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 30
[ 2.575023] ehci-platform 1c14000.usb: EHCI Host Controller
[ 2.581086] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 2.589114] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
[ 2.603385] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 2.609762] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.616571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.623803] usb usb1: Product: EHCI Host Controller
[ 2.628691] usb usb1: Manufacturer: Linux 4.0.3-1-ARCH ehci_hcd
[ 2.634618] usb usb1: SerialNumber: 1c14000.usb
[ 2.639995] hub 1-0:1.0: USB hub found
[ 2.643838] hub 1-0:1.0: 1 port detected
[ 2.649279] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 2.655311] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 2.663431] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
[ 2.678385] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 2.684731] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.691540] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.698771] usb usb2: Product: EHCI Host Controller
[ 2.703659] usb usb2: Manufacturer: Linux 4.0.3-1-ARCH ehci_hcd
[ 2.709585] usb usb2: SerialNumber: 1c1c000.usb
[ 2.714921] hub 2-0:1.0: USB hub found
[ 2.718763] hub 2-0:1.0: 1 port detected
[ 2.724204] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 2.731279] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 2.739318] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
[ 2.802581] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.809390] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.816621] usb usb3: Product: Generic Platform OHCI controller
[ 2.822557] usb usb3: Manufacturer: Linux 4.0.3-1-ARCH ohci_hcd
[ 2.828506] usb usb3: SerialNumber: 1c14400.usb
[ 2.833965] hub 3-0:1.0: USB hub found
[ 2.837771] hub 3-0:1.0: 1 port detected
[ 2.843302] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 2.850360] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 2.858448] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
[ 2.898383] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.905262] ata1.00: ATA-9: WDC WD10JFCX-68N6GN0, 01.01A01, max UDMA/133
[ 2.911986] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.919455] ata1.00: configured for UDMA/133
[ 2.922609] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.922617] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.922624] usb usb4: Product: Generic Platform OHCI controller
[ 2.922631] usb usb4: Manufacturer: Linux 4.0.3-1-ARCH ohci_hcd
[ 2.922636] usb usb4: SerialNumber: 1c1c400.usb
[ 2.923540] hub 4-0:1.0: USB hub found
[ 2.923601] hub 4-0:1.0: 1 port detected
[ 2.925643] sunxi-mmc 1c12000.mmc: No vqmmc regulator found
[ 2.963396] sunxi-mmc 1c12000.mmc: base:0xf011e000 irq:27
[ 2.967460] sunxi-rtc 1c20d00.rtc: setting system clock to 2085-05-14 09:25:44 UTC (3640670744)
[ 2.967475] sr_init: No PMIC hook to init smartreflex
[ 2.967635] sr_init: platform driver register failed for SR
[ 2.974653] Unable to find PPMU node
[ 2.974681] exynos5-bus-int: probe of exynos5-bus-int failed with error -2
[ 2.974785] usb0-vbus: disabling
[ 2.992369] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
[ 3.002918] vcc5v0: disabling
[ 3.002924] vcc3v0: disabling
[ 3.003082] ALSA device list:
[ 3.003085] No soundcards found.
[ 3.025050] scsi 0:0:0:0: Direct-Access ATA WDC WD10JFCX-68N 1A01 PQ: 0 ANSI: 5
[ 3.034645] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.034780] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.034788] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.035109] sd 0:0:0:0: [sda] Write Protect is off
[ 3.035252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.057870] sda: sda1 sda2
[ 3.059620] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.075442] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[ 3.077484] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.079006] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.080519] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.083228] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.099394] mmc1: new high speed SDIO card at address 0001
[ 3.111832] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[ 3.133544] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.141721] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 3.149283] devtmpfs: mounted
[ 3.154244] Freeing unused kernel memory: 1040K (c0de4000 - c0ee8000)
[ 3.433519] usb 4-1: new full-speed USB device number 2 using ohci-platform
[ 3.445253] random: systemd urandom read with 19 bits of entropy available
[ 3.472919] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 3.491634] systemd[1]: Detected architecture 'arm'.

Welcome to Arch Linux ARM!

[ 3.514732] systemd[1]: Set hostname to <alarm>.
[ 3.652470] usb 4-1: New USB device found, idVendor=400c, idProduct=107a
[ 3.659276] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.666430] usb 4-1: Product: SAGE AirMouse
[ 3.670678] usb 4-1: Manufacturer: SAGE
[ 3.674572] usb 4-1: SerialNumber: て䡧䭜熩
[ 3.690876] input: SAGE SAGE AirMouse as /devices/platform/soc@01c00000/1c1c400.usb/usb4/4-1/4-1:1.0/0003:400C:107A.0001/input/input1
[ 3.754035] hid-generic 0003:400C:107A.0001: input,hiddev0,hidraw0: USB HID v1.01 Keyboard [SAGE SAGE AirMouse] on usb-1c1c400.usb-1/input0
[ 3.779921] input: SAGE SAGE AirMouse as /devices/platform/soc@01c00000/1c1c400.usb/usb4/4-1/4-1:1.1/0003:400C:107A.0002/input/input2
[ 3.812926] systemd[1]: Unit type .busname is not supported on this system.
[ 3.843977] hid-generic 0003:400C:107A.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [SAGE SAGE AirMouse] on usb-1c1c400.usb-1/input1
[ 4.249878] systemd[1]: Cannot add dependency job for unit org.freedesktop.resolve1.busname, ignoring: Unit org.freedesktop.resolve1.busname failed to load: No such file or directory.
[ 4.266947] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.289016] systemd[1]: Time has been changed
[ 4.293874] systemd[1]: Time has been changed
[ 4.298593] systemd[1]: Time has been changed
[ 4.303206] systemd[1]: Time has been changed
[ 4.307897] systemd[1]: Time has been changed
[ 4.312566] systemd[1]: Time has been changed
[ 4.317210] systemd[1]: Time has been changed
[ 4.321851] systemd[1]: Time has been changed
...
')
5. When i change log level in /etc/systemd/system.conf to LogLevel=err, then boot message looks like this:
$this->bbcode_second_pass_code('', '
Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.3-1-ARCH (builduser@leming) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP Wed May 13 21:28:04 MDT 2015
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubietruck
[ 0.000000] cma: Reserved 16 MiB at 0xbe800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ee5d4000 s17024 r8192 d23936 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520530
[ 0.000000] Kernel command line: console=ttyS0,115200 root=PARTUUID=f83165cf-01 rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2036048K/2088960K available (10075K kernel code, 957K rwdata, 4116K rodata, 1040K init, 908K bss, 36528K reserved, 16384K cma-reserved, 1294336K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0de3fd4 (14192 kB)
[ 0.000000] .init : 0xc0de4000 - 0xc0ee8000 (1040 kB)
[ 0.000000] .data : 0xc0ee8000 - 0xc0fd74f0 ( 958 kB)
[ 0.000000] .bss : 0xc0fd74f0 - 0xc10ba510 ( 909 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC physical location is 0x1c81000
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000022] Switching to timer-based delay loop, resolution 41ns
[ 0.001889] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.003059] Console: colour dummy device 80x30
[ 0.003095] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[ 0.003112] pid_max: default: 32768 minimum: 301
[ 0.003239] Security Framework initialized
[ 0.003435] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003448] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004304] Initializing cgroup subsys blkio
[ 0.004332] Initializing cgroup subsys memory
[ 0.004372] Initializing cgroup subsys devices
[ 0.004389] Initializing cgroup subsys freezer
[ 0.004405] Initializing cgroup subsys net_cls
[ 0.004419] Initializing cgroup subsys perf_event
[ 0.004436] Initializing cgroup subsys net_prio
[ 0.004511] CPU: Testing write buffer coherency: ok
[ 0.004561] ftrace: allocating 36931 entries in 109 pages
[ 0.063113] /cpus/cpu@0 missing clock-frequency property
[ 0.063150] /cpus/cpu@1 missing clock-frequency property
[ 0.063165] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.063259] Setting up static identity map for 0x4090af08 - 0x4090afa0
[ 0.066592] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.066712] Brought up 2 CPUs
[ 0.066734] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.066742] CPU: All CPU(s) started in HYP mode.
[ 0.066748] CPU: Virtualization extensions available.
[ 0.067606] devtmpfs: initialized
[ 0.068913] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.070557] xor: measuring software checksum speed
[ 0.117772] arm4regs : 1214.400 MB/sec
[ 0.167838] 8regs : 720.000 MB/sec
[ 0.217904] 32regs : 889.600 MB/sec
[ 0.267972] neon : 704.000 MB/sec
[ 0.267982] xor: using function: arm4regs (1214.400 MB/sec)
[ 0.268141] pinctrl core: initialized pinctrl subsystem
[ 0.276809] NET: Registered protocol family 16
[ 0.278776] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.289722] No ATAGs?
[ 0.289779] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.289793] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.291682] Serial: AMBA PL011 UART driver
[ 0.398600] raid6: int32x1 112 MB/s
[ 0.483773] raid6: int32x2 152 MB/s
[ 0.568907] raid6: int32x4 133 MB/s
[ 0.653998] raid6: int32x8 121 MB/s
[ 0.739063] raid6: neonx1 449 MB/s
[ 0.824165] raid6: neonx2 610 MB/s
[ 0.909358] raid6: neonx4 618 MB/s
[ 0.994599] raid6: neonx8 450 MB/s
[ 0.994608] raid6: using algorithm neonx4 (618 MB/s)
[ 0.994616] raid6: using intx1 recovery algorithm
[ 0.997128] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
[ 0.997159] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.997194] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
[ 0.997209] platform usb0-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.997236] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.997251] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.997278] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.997292] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.998142] reg-fixed-voltage vmmc3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/vmmc3_pin@0, deferring probe
[ 0.998164] platform vmmc3: Driver reg-fixed-voltage requests probe deferral
[ 1.001847] vgaarb: loaded
[ 1.003138] SCSI subsystem initialized
[ 1.003851] usbcore: registered new interface driver usbfs
[ 1.003942] usbcore: registered new interface driver hub
[ 1.004026] usbcore: registered new device driver usb
[ 1.005492] media: Linux media interface: v0.10
[ 1.005561] Linux video capture interface: v2.00
[ 1.005676] pps_core: LinuxPPS API ver. 1 registered
[ 1.005686] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.005716] PTP clock support registered
[ 1.005802] EDAC MC: Ver: 3.0.0
[ 1.007118] Advanced Linux Sound Architecture Driver Initialized.
[ 1.007967] NetLabel: Initializing
[ 1.007980] NetLabel: domain hash size = 128
[ 1.007986] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.008050] NetLabel: unlabeled traffic allowed by default
[ 1.008361] Switched to clocksource arch_sys_counter
[ 1.072663] NET: Registered protocol family 2
[ 1.073820] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.073919] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.074040] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.074128] TCP: reno registered
[ 1.074144] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.074206] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.074493] NET: Registered protocol family 1
[ 1.074940] RPC: Registered named UNIX socket transport module.
[ 1.074954] RPC: Registered udp transport module.
[ 1.074961] RPC: Registered tcp transport module.
[ 1.074968] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.076016] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 1.078565] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.087204] zpool: loaded
[ 1.087229] zbud: loaded
[ 1.087886] VFS: Disk quotas dquot_6.5.2
[ 1.088125] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.090243] NFS: Registering the id_resolver key type
[ 1.090324] Key type id_resolver registered
[ 1.090333] Key type id_legacy registered
[ 1.090362] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.093233] bounce: pool size: 64 pages
[ 1.093552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.093740] io scheduler noop registered
[ 1.093759] io scheduler deadline registered
[ 1.093953] io scheduler cfq registered (default)
[ 1.095348] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 1.100706] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 1.178327] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.181822] console [ttyS0] disabled
[ 1.202250] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A
[ 2.049313] console [ttyS0] enabled
[ 2.053420] Serial: AMBA driver
[ 2.058202] [drm] Initialized drm 1.1.0 20060810
[ 2.070916] loop: module loaded
[ 2.075779] Loading iSCSI transport class v2.0-870.
[ 2.081354] iscsi: registered transport (tcp)
[ 2.086816] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 2.100192] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.106808] ehci-pci: EHCI PCI platform driver
[ 2.111353] ehci-platform: EHCI generic platform driver
[ 2.116851] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 2.124213] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 2.131579] ehci-mxc: Freescale On-Chip EHCI Host driver
[ 2.137025] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.142408] ehci-orion: EHCI orion driver
[ 2.146564] ehci-exynos: EHCI EXYNOS driver
[ 2.150903] tegra-ehci: Tegra EHCI driver
[ 2.155065] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.161294] ohci-pci: OHCI PCI platform driver
[ 2.165841] ohci-platform: OHCI generic platform driver
[ 2.171278] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[ 2.178619] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[ 2.185952] ohci-exynos: OHCI EXYNOS driver
[ 2.190308] ohci-omap3: OHCI OMAP3 driver
[ 2.194525] usbcore: registered new interface driver uas
[ 2.199940] usbcore: registered new interface driver usb-storage
[ 2.206010] usbcore: registered new interface driver ums-cypress
[ 2.212091] usbcore: registered new interface driver ums_eneub6250
[ 2.218333] usbcore: registered new interface driver ums-freecom
[ 2.224401] usbcore: registered new interface driver ums-isd200
[ 2.230378] usbcore: registered new interface driver ums-usbat
[ 2.241664] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 2.248518] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 2.253446] i2c /dev entries driver
[ 2.258551] axp20x 0-0034: AXP20x variant AXP209 found
[ 2.272230] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
[ 2.286110] axp20x 0-0034: AXP20X driver loaded
[ 2.297062] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
[ 2.306254] Driver 'mmcblk' needs updating - please use bus_type methods
[ 2.313055] sdhci: Secure Digital Host Controller Interface driver
[ 2.319250] sdhci: Copyright(c) Pierre Ossman
[ 2.324200] Synopsys Designware Multimedia Card Interface Driver
[ 2.331330] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 2.337618] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 2.368648] sunxi-mmc 1c0f000.mmc: base:0xf00ae000 irq:26
[ 2.374665] platform 1c12000.mmc: Driver sunxi-mmc requests probe deferral
[ 2.381790] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.389339] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.396381] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.402495] usbcore: registered new interface driver usbhid
[ 2.408124] usbhid: USB HID core driver
[ 2.412561] ashmem: initialized
[ 2.423137] oprofile: using timer interrupt.
[ 2.427790] TCP: cubic registered
[ 2.431895] NET: Registered protocol family 10
[ 2.437871] mip6: Mobile IPv6
[ 2.440950] NET: Registered protocol family 17
[ 2.445549] Key type dns_resolver registered
[ 2.446317] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.448692] mmc0: new high speed SDHC card at address 0001
[ 2.463731] mmcblk0: mmc0:0001 00000 29.2 GiB
[ 2.465107] ThumbEE CPU extension supported.
[ 2.465134] Registering SWP/SWPB emulation handler
[ 2.466126] registered taskstats version 1
[ 2.469257] Btrfs loaded
[ 2.485415] mmcblk0: p1
[ 2.513456] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 2.521009] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
[ 2.528180] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.537170] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
[ 2.546956] scsi host0: ahci-sunxi
[ 2.550821] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 30
[ 2.559881] ehci-platform 1c14000.usb: EHCI Host Controller
[ 2.565876] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 2.573901] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
[ 2.588402] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 2.594765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.601574] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.608806] usb usb1: Product: EHCI Host Controller
[ 2.613695] usb usb1: Manufacturer: Linux 4.0.3-1-ARCH ehci_hcd
[ 2.619622] usb usb1: SerialNumber: 1c14000.usb
[ 2.625007] hub 1-0:1.0: USB hub found
[ 2.628894] hub 1-0:1.0: 1 port detected
[ 2.634434] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 2.640439] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 2.648504] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
[ 2.663414] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 2.669774] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.676583] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.683814] usb usb2: Product: EHCI Host Controller
[ 2.688701] usb usb2: Manufacturer: Linux 4.0.3-1-ARCH ehci_hcd
[ 2.694628] usb usb2: SerialNumber: 1c1c000.usb
[ 2.699943] hub 2-0:1.0: USB hub found
[ 2.703815] hub 2-0:1.0: 1 port detected
[ 2.709330] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 2.716393] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 2.724394] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
[ 2.787617] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.794428] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.801660] usb usb3: Product: Generic Platform OHCI controller
[ 2.807597] usb usb3: Manufacturer: Linux 4.0.3-1-ARCH ohci_hcd
[ 2.813530] usb usb3: SerialNumber: 1c14400.usb
[ 2.818983] hub 3-0:1.0: USB hub found
[ 2.822784] hub 3-0:1.0: 1 port detected
[ 2.828252] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 2.835292] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 2.843415] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
[ 2.883394] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.890265] ata1.00: ATA-9: WDC WD10JFCX-68N6GN0, 01.01A01, max UDMA/133
[ 2.896988] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.904465] ata1.00: configured for UDMA/133
[ 2.907634] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.907643] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.907651] usb usb4: Product: Generic Platform OHCI controller
[ 2.907657] usb usb4: Manufacturer: Linux 4.0.3-1-ARCH ohci_hcd
[ 2.907663] usb usb4: SerialNumber: 1c1c400.usb
[ 2.908598] hub 4-0:1.0: USB hub found
[ 2.908655] hub 4-0:1.0: 1 port detected
[ 2.910658] sunxi-mmc 1c12000.mmc: No vqmmc regulator found
[ 2.938401] sunxi-mmc 1c12000.mmc: base:0xf011e000 irq:27
[ 2.942937] sunxi-rtc 1c20d00.rtc: setting system clock to 2085-05-14 09:47:55 UTC (3640672075)
[ 2.943012] sr_init: No PMIC hook to init smartreflex
[ 2.943160] sr_init: platform driver register failed for SR
[ 2.951218] Unable to find PPMU node
[ 2.951246] exynos5-bus-int: probe of exynos5-bus-int failed with error -2
[ 2.951354] usb0-vbus: disabling
[ 2.957999] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
[ 2.977487] ldo4: disabling
[ 2.996775] ldo3: disabling
[ 3.002471] vcc5v0: disabling
[ 3.002965] scsi 0:0:0:0: Direct-Access ATA WDC WD10JFCX-68N 1A01 PQ: 0 ANSI: 5
[ 3.004353] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.004904] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.004912] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.005229] sd 0:0:0:0: [sda] Write Protect is off
[ 3.005370] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.032009] sda: sda1 sda2
[ 3.033775] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.053185] vcc3v0: disabling
[ 3.056338] ALSA device list:
[ 3.059340] No soundcards found.
[ 3.064415] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[ 3.073460] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[ 3.081945] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.089134] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.096487] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.105554] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.128956] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.137181] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 3.144798] devtmpfs: mounted
[ 3.149765] Freeing unused kernel memory: 1040K (c0de4000 - c0ee8000)
[ 3.152778] mmc1: new high speed SDIO card at address 0001
[ 3.268520] usb 4-1: new full-speed USB device number 2 using ohci-platform
[ 3.449962] random: systemd urandom read with 31 bits of entropy available

Welcome to Arch Linux ARM!

[ 3.487497] usb 4-1: New USB device found, idVendor=400c, idProduct=107a
[ 3.497512] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.504673] usb 4-1: Product: SAGE AirMouse
[ 3.508892] usb 4-1: Manufacturer: SAGE
[ 3.512760] usb 4-1: SerialNumber: て䡧䭜熩
[ 3.526833] input: SAGE SAGE AirMouse as /devices/platform/soc@01c00000/1c1c400.usb/usb4/4-1/4-1:1.0/0003:400C:107A.0001/input/input1
[ 3.594058] hid-generic 0003:400C:107A.0001: input,hiddev0,hidraw0: USB HID v1.01 Keyboard [SAGE SAGE AirMouse] on usb-1c1c400.usb-1/input0
[ 3.617410] input: SAGE SAGE AirMouse as /devices/platform/soc@01c00000/1c1c400.usb/usb4/4-1/4-1:1.1/0003:400C:107A.0002/input/input2
[ 3.683967] hid-generic 0003:400C:107A.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [SAGE SAGE AirMouse] on usb-1c1c400.usb-1/input1
[ OK ] Reached target Swap.
[ OK ] Reached target Remote File Systems.
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
[ OK ] Reached target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Created slice Root Slice.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Created slice User and Session Slice.
[ OK ] Created slice System Slice.
[ OK ] Created slice system-getty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Reached target Slices.
[ OK ] Listening on LVM2 metadata daemon socket.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Listening on Journal Socket.
Mounting POSIX Message Queue File System...
Mounting Debug File System...
Starting Create list of required st... nodes for the current kernel...
Starting udev Coldplug all Devices...
Starting Remount Root and Kernel File Systems...
Starting Setup Virtual Console...
Mounting Temporary Directory...
Starting Journal Service...
Starting Apply Kernel Variables...
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Temporary Directory.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ 5.150470] systemd-journald[99]: Failed to set file attributes: Inappropriate ioctl for device
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Apply Kernel Variables.
[ 5.295901] systemd-journald[99]: Failed to set file attributes: Inappropriate ioctl for device
[ OK ] Started udev Coldplug all Devices.
[ 5.346110] random: nonblocking pool is initialized
Starting Load/Save Random Seed...
Starting Create Static Device Nodes in /dev...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Found device /dev/ttyS0.
[ 11.842573] stmmaceth 1c50000.ethernet: no regulator found
[ 11.859553] mousedev: PS/2 mouse device common for all mice
[ 11.977357] stmmaceth 1c50000.ethernet: no reset control found
[ 11.997098] Ring mode enabled
[ 12.000237] No HW DMA feature register supported
[ 12.004849] Normal descriptors
[ 12.008180] TX Checksum insertion supported
[ 12.223288] libphy: stmmac: probed
[ 12.226803] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 12.233202] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 13.141817] cfg80211: Calling CRDA to update world regulatory domain
[ 13.690269] usbcore: registered new interface driver brcmfmac
[ 13.870134] brcmfmac_sdio mmc1:0001:1: Direct firmware load for brcm/brcmfmac43362-sdio.txt failed with error -2
[ 14.898522] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ 15.908465] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[ *** ] A start job is running for Journal Service (1min 2s / 1min 30s)[ 66.854376] systemd[1]: systemd-journald.service watchdog timeout (limit 1min)!
[FAILED] Failed to start Journal Service.
See "systemctl status systemd-journald.service" for details.
[ 68.573650] systemd[1]: Failed to start Journal Service.
[DEPEND] Dependency failed for Flush Journal to Persistent Storage.
[ 68.588674] systemd[1]: Dependency failed for Flush Journal to Persistent Storage.
[ 72.088307] systemd-coredump[137]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.5dbd3f8b1aeb490f898673fa47cbc75c.99.3640672139000000.lz4.
')

Is this a known problem (Cubietruck with mainline kernel and latest systemd)?
The same configuration on Cubieboard 2 works without problems!
ZagorTeNej
 
Posts: 3
Joined: Sun Jun 15, 2014 4:55 pm

Re: Boot hangs with "Failed to run main loop, freezing."

Postby Abroxa » Tue Jun 02, 2015 3:43 pm

I have the very same problem described by ZagorTeNej.

endless messages like that one:
[4.293874] systemd[1]: Time has been changed
...

I also carefully followed the "official" installation instructions. With linux-sun7i, everything worked fine - except for ethernet, I needed to modprobe sunxi-gmac (I have created a /etc/modules-load.d/cubietruck.conf for it). Maybe this could be added to the installation instructions?

However, the bigger problem is mentioned above. I want to have the mainline kernel linux-armv7 running with the latest repo. Any help?
Abroxa
 
Posts: 5
Joined: Fri May 02, 2014 9:10 am

Re: Boot hangs with "Failed to run main loop, freezing."

Postby krabat » Tue Jun 02, 2015 4:53 pm

$this->bbcode_second_pass_quote('Abroxa', '.').. ethernet, I needed to modprobe sunxi-gmac (I have created a /etc/modules-load.d/cubietruck.conf for it). Maybe this could be added to the installation instructions?
http://archlinuxarm.org/forum/viewtopic.php?f=33&t=8723
krabat
 
Posts: 57
Joined: Wed Jun 04, 2014 8:03 pm


Return to Allwinner

Who is online

Users browsing this forum: No registered users and 4 guests