error when booting cubietruck

This forum is for supported devices using an ARMv7 Allwinner SoC.

error when booting cubietruck

Postby gcd0318 » Mon Jul 06, 2015 11:20 am

I followed the guide of http://archlinuxarm.org/platforms/armv7 ... cubietruck to create a tf card to boot my cubietruck, but got following error on the first screen:
file not found /boot/initramfs-linux.img
I attached the messages when booting
error.jpg
error screen
error.jpg (174.79 KiB) Viewed 4006 times

after this, the screen got black, with two penguins on top left corner, and nothing going on then. usb keyboard does not work, eth cable does not blink, and no ip in dhcp list of my router, either.
gcd0318
 
Posts: 15
Joined: Tue Feb 10, 2015 2:14 pm
Location: CHN

Re: error when booting cubietruck

Postby h4xx » Mon Jul 06, 2015 11:46 am

Hi,

please try to plug off everything from your Cubietruck and then shorten the RTC Battery for 10 seconds with a wire.

You can ignore the error Messages, they are fine.

Regards

h4xx
h4xx
 
Posts: 19
Joined: Wed Dec 25, 2013 12:34 pm

Re: error when booting cubietruck

Postby gcd0318 » Mon Jul 06, 2015 1:30 pm

hi h4xx,

I got your suggestions in other topics. The only thing I plugged is power supply and vga, even usb keyboard and ethernet were plugged after this. I have removed sata disk and usb hub already
gcd0318
 
Posts: 15
Joined: Tue Feb 10, 2015 2:14 pm
Location: CHN

Re: error when booting cubietruck

Postby h4xx » Mon Jul 06, 2015 3:35 pm

Am i getting this right?
You have the power supply plugged in while you shorten the RTC battery? That just won´t work.

Plug off everything, then shorten the battery for 10 seconds. Then try again.
h4xx
 
Posts: 19
Joined: Wed Dec 25, 2013 12:34 pm


Return to Allwinner

Who is online

Users browsing this forum: No registered users and 4 guests