How to install ArchLinuxARM on Embedsky E8 Mini-PC?

This is for any ARMv7 device that we do not officially support.

How to install ArchLinuxARM on Embedsky E8 Mini-PC?

Postby Nicoletta » Tue Feb 09, 2016 7:28 am

Hi everyone,

I have recently acquired an Embedsky E8 Mini-PC:
http://en.embedsky.com/product_info.php ... 167&id=165
CPU: Samsung S5PV210 Cortex A8
RAM: DDR2 512M
FLASH: 4GB

All the manuals I found are in Chinese, so I'm a little lost here. Also, I'm not that experienced with Linux.

This is what I get when I connect with Putty through the serial port:
Image

I have created an ArchLinuxARM bootable USB thumbdrive and tried to get the E8 to boot from it:

Code: Select all
#####       Boot for E8 Main Menu        #####
#####     EmbedSky USB download mode     #####

[1] Download u-boot.bin to board
[2] Download Eboot (eboot.nb0) to board
[3] Download Linux Kernel (zImage.bin) to board
[4] Download LOGO Picture (logo.bin) to board
[5] Download RAMDISK image (ramdisk.gz) to board
[6] Download EXT4FS image (root.ex4) to board
[7] Download Program to SDRAM and Run it
[8] Boot the system
[9] Create partition
[0] Set the boot parameters
[b] Enter Recovery mode
[h] system halt
[n] Enter TFTP download mode menu
[t] Test Linux Image (zImage)
Enter your selection: 0

##### Parameter Menu #####
[1] Set NFS boot parameter
[2] Set EXT4FS boot parameter for Android
[3] Set EXT4FS boot parameter for Ubuntu
[4] Set EXT4FS boot parameter for Linux
[5] Set RAMFS boot parameter for Recovery mode
[6] Set parameter
[7] View the parameters
[c] Choice lcd type.
[g] Configuration 3g module.
[k] Set default boot kernel type.
[d] Delete parameter
[s] Save the parameters to board.
[q] Return main Menu
Enter your selection: 7
Name(enter to view all paramters): *
bootargs=noinitrd root=/dev/mmcblk0p3 rw  rootfstype=ext4 rootwait init=/init co                                                                                                                     nsole=ttySAC0
bootcmd=movi read ${kernel_type} 0xC0008000; bootm 0xC0008000
bootdelay=0
baudrate=115200
ethaddr=00:40:5c:26:0a:5b
ipaddr=192.168.1.6
serverip=192.168.1.8
gatewayip=192.168.1.2
netmask=255.255.255.0
lcdtype=X1024Y768
bootargs_defaults=setenv bootargs ${bootargs} lcd=${lcdtype}
bootloaderimgname=u-boot.bin
logoimgname=logo.bin
nkimgname=NK.bin
kernelimgname=zImage.bin
rootimgname=root.ex4
ramdiskname=ramdisk.gz
nfsipaddr=192.168.1.6
nfsserverip=192.168.1.8
nfsnetmask=255.255.255.0
nfs_dir=/opt/EmbedSky/TQ210/root_nfs
kernel_type=kernel_android
stdin=serial
stdout=serial
stderr=serial

Environment size: 685/16380 bytes

##### Parameter Menu #####
[1] Set NFS boot parameter
[2] Set EXT4FS boot parameter for Android
[3] Set EXT4FS boot parameter for Ubuntu
[4] Set EXT4FS boot parameter for Linux
[5] Set RAMFS boot parameter for Recovery mode
[6] Set parameter
[7] View the parameters
[c] Choice lcd type.
[g] Configuration 3g module.
[k] Set default boot kernel type.
[d] Delete parameter
[s] Save the parameters to board.
[q] Return main Menu
Enter your selection: 6
Name: *bootargs
Value: *noinitrd root /dev/usb/hiddev0 rw  rootfstype=ext4 rootwait init=/init c                                                                                                                     onsole=ttySAC0
setenv bootargs noinitrd root /dev/usb/hiddev0 rw  rootfstype=ext4 rootwait init                                                                                                                     =/init console=ttySAC0

##### Parameter Menu #####
[1] Set NFS boot parameter
[2] Set EXT4FS boot parameter for Android
[3] Set EXT4FS boot parameter for Ubuntu
[4] Set EXT4FS boot parameter for Linux
[5] Set RAMFS boot parameter for Recovery mode
[6] Set parameter
[7] View the parameters
[c] Choice lcd type.
[g] Configuration 3g module.
[k] Set default boot kernel type.
[d] Delete parameter
[s] Save the parameters to board.
[q] Return main Menu
Enter your selection: 7
Name(enter to view all paramters): *
bootcmd=movi read ${kernel_type} 0xC0008000; bootm 0xC0008000
bootdelay=0
baudrate=115200
ethaddr=00:40:5c:26:0a:5b
ipaddr=192.168.1.6
serverip=192.168.1.8
gatewayip=192.168.1.2
netmask=255.255.255.0
lcdtype=X1024Y768
bootargs_defaults=setenv bootargs ${bootargs} lcd=${lcdtype}
bootloaderimgname=u-boot.bin
logoimgname=logo.bin
nkimgname=NK.bin
kernelimgname=zImage.bin
rootimgname=root.ex4
ramdiskname=ramdisk.gz
nfsipaddr=192.168.1.6
nfsserverip=192.168.1.8
nfsnetmask=255.255.255.0
nfs_dir=/opt/EmbedSky/TQ210/root_nfs
kernel_type=kernel_android
stdin=serial
stdout=serial
stderr=serial
bootargs=noinitrd root /dev/usb/hiddev0 rw rootfstype=ext4 rootwait init=/init c                                                                                                                     onsole=ttySAC0

Environment size: 687/16380 bytes

##### Parameter Menu #####
[1] Set NFS boot parameter
[2] Set EXT4FS boot parameter for Android
[3] Set EXT4FS boot parameter for Ubuntu
[4] Set EXT4FS boot parameter for Linux
[5] Set RAMFS boot parameter for Recovery mode
[6] Set parameter
[7] View the parameters
[c] Choice lcd type.
[g] Configuration 3g module.
[k] Set default boot kernel type.
[d] Delete parameter
[s] Save the parameters to board.
[q] Return main Menu
Enter your selection: s
Saving Environment to TQ210 bootable device...
done


But when I power up the E8, this is what I get:

Code: Select all
Start Linux ...
reading android kernel.. 25649, 12288
MMC read: dev # 0, block # 25649, count 12288 ...12288 blocks read: OK
completed
Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 3.0.8-EmbedSky (root@embedsk-server) (gcc version 4.4.6 (for TQ210                                                                                                                      EmbedSky Tech) ) #1 PREEMPT Fri Aug 23 17:05:16 CST 2013
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: TQ210
Memory policy: ECC disabled, Data cache writeback
bootargs no set lcd type! using default a70.
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
sclk_dmc: source is sclk_a2m (0), rate is 200000000
sclk_onenand: source is hclk_dsys (1), rate is 166750000
uclk1: source is mout_mpll (6), rate is 66700000
uclk1: source is mout_mpll (6), rate is 66700000
uclk1: source is mout_mpll (6), rate is 66700000
uclk1: source is mout_mpll (6), rate is 66700000
sclk_mixer: source is sclk_dac (0), rate is 54000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_fimd: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mfc: source is sclk_a2m (0), rate is 200000000
sclk_g2d: source is sclk_a2m (0), rate is 200000000
sclk_g3d: source is sclk_a2m (0), rate is 200000000
sclk_csis: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_pwi: source is ext_xtal (0), rate is 24000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
s5p: 36864 kbytes system memory reserved for mfc at 0x2dc00000, 0-bank base(0x2d                                                                                                                     c00000)
s5p: 36864 kbytes system memory reserved for mfc at 0x3dbf5000, 1-bank base(0x3d                                                                                                                     bf5000)
s5p: 6144 kbytes system memory reserved for fimc0 at 0x3d5f5000, 1-bank base(0x3                                                                                                                     d5f5000)
s5p: 9900 kbytes system memory reserved for fimc1 at 0x3cc4a000, 1-bank base(0x3                                                                                                                     cc4a000)
s5p: 6144 kbytes system memory reserved for fimc2 at 0x3c64a000, 1-bank base(0x3                                                                                                                     c64a000)
s5p: 8192 kbytes system memory reserved for jpeg at 0x2d400000, 0-bank base(0x2d                                                                                                                     400000)
s5p: 11560 kbytes system memory reserved for fimd at 0x3bb00000, 1-bank base(0x3                                                                                                                     bb00000)
s5p: 1800 kbytes system memory reserved for pmem_gpu1 at 0x2d23e000, 0-bank base                                                                                                                     (0x2d23e000)
s5p: 8192 kbytes system memory reserved for g2d at 0x2ca3e000, 0-bank base(0x2ca                                                                                                                     3e000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 98633
Kernel command line: noinitrd root /dev/usb/hiddev0 rw rootfstype=ext4 rootwait                                                                                                                      init=/init console=ttySAC0 lcd=X1024Y768
user X1024Y768 lcd.
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 202MB 187MB 0MB = 389MB total
Memory: 384120k/509780k available, 14508k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff000000 - 0xffe00000   (  14 MB)
    vmalloc : 0xe0800000 - 0xfd000000   ( 456 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0037000   ( 188 kB)
      .text : 0xc0037000 - 0xc09161a8   (9085 kB)
      .data : 0xc0918000 - 0xc0973240   ( 365 kB)
       .bss : 0xc0973264 - 0xc09b0d60   ( 247 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:208
VIC @fd000000: id 0x00041192, vendor 0x41
VIC @fd010000: id 0x00041192, vendor 0x41
VIC @fd020000: id 0x00041192, vendor 0x41
VIC @fd030000: id 0x00041192, vendor 0x41
mult[140737]
max_delta_ns[2937815369]
min_delta_ns[30517]
rate[32768]
HZ[256]
Console: colour dummy device 80x30
Calibrating delay loop... 994.84 BogoMIPS (lpj=1941504)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
print_constraints: dummy:
NET: Registered protocol family 16
ENter s3c_adc_set_platdata,devname(s5pv210-adc)

S3C Power Management, Copyright 2004 Simtec Electronics
using VGA1024x768 param
s3c_fb_set_platdata: NUM_OVLY_WIN should be less than default                  w                                                                                                                     indow number. set to 0.
smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 4168750, tdiv at 4168750, tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 4168750, tdiv at 4168750, tin=divclk, base 16
print_constraints: pd_audio_supply: 5000 mV normal
print_constraints: pd_tv_supply: 5000 mV normal
print_constraints: pd_lcd_supply: 5000 mV normal
print_constraints: pd_g3d_supply: 5000 mV normal
print_constraints: pd_mfc_supply: 5000 mV normal
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.5: using pins 172 (SDA) and 173 (SCL)
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.2: slave address 0x10
s3c-i2c s3c2440-i2c.2: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource clock_source_systimer
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 12288 bytes)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PMU: registered new PMU device of type 0
cpuidle: phy_regs_save:0x3b4bf000
S5PV210 ADC driver, (c) 2010 Samsung Electronics
Loaded driver for PL330 DMAC-0 s3c-pl330
        DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
Loaded driver for PL330 DMAC-1 s3c-pl330
        DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Loaded driver for PL330 DMAC-2 s3c-pl330
        DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
ashmem: initialized
NTFS driver 2.1.30 [Flags: R/W DEBUG].
msgmni has been set to 750
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
win->id=0, pmem_start=0x3bb00000
s3cfb s3cfb: [fb0] dma: 0x3bb00000, cpu: 0xe1000000, size: 0x009f7000
FIMD src sclk = 166750000
s3cfb s3cfb: registered successfully
Start display and show logo
[VGA] ch7034_attach_adapter.
i2c i2c-2: ch7034 probe
(0x25)=0x1b
hinca_reg=0x3ff,hincb_reg=0x3ff,hinc_reg=0x100000
vinca_reg=0x2ff,vincb_reg=0x2ff,vinc_reg=0x100000
ch7034 probe successfully
i2c-core: driver [ch7034] using legacy suspend method
i2c-core: driver [ch7034] using legacy resume method
s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
console [ttySAC0] enabled
s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
TQ210 Beep driver successfully probed
TQ210 LEDs driver successfully probed
PA FB = 0x3BB00000, bits per pixel = 32
screen width=1024 height=768 va=0xdbb00000 pa=0x3bb00000
xres_virtual = 1024, yres_virtual = 1536, xoffset = 0, yoffset = 0
fb_size=10448896
Back frameBuffer[0].VAddr=dbe00000 PAddr=3be00000 size=3145728
Back frameBuffer[1].VAddr=dc100000 PAddr=3c100000 size=3145728
brd: module loaded
loop: module loaded
S3C NAND Driver, (c) 2008 Samsung Electronics
Unknown NAND Device.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
dm9000 Ethernet Driver, V1.31
dm9000_set_io byte_width 1
dm9000_set_io byte_width 2
dm9000 revision 0x1a io_mode 00
eth0: dm9000c at e082c300,e082e304 IRQ 42 MAC: 00:09:c2:ff:ec:68 (platform data)
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver zd1211rw
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
usbcore: registered new interface driver rt2500usb
usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver rt2800usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: S5P EHCI Host Controller
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5p-ohci s5p-ohci: EXYNOS OHCI Host Controller
s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
 lun0: LUN: removable file: (no medium)
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
mousedev: PS/2 mouse device common for all mice
gpio-keys init
input: gpio-keys as /devices/platform/gpio-keys/input/input0
input: tq210_hs0038 as /devices/virtual/input/input1
Input: S3C GPIO  hs0038 Registered
usbcore: registered new interface driver usbtouchscreen
S5P Touchscreen driver, (c) 2008 Samsung Electronics
Resistance_ts got loaded successfully : 10 bits
input: Resistance_ts as /devices/virtual/input/input2
TSSEL : 1
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
using rtc device, s3c, for alarms
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 250
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
i2c-core: driver [msp3400] using legacy suspend method
i2c-core: driver [msp3400] using legacy resume method
usbcore: registered new interface driver em28xx
em28xx driver loaded
Em28xx: Initialized (Em28xx Audio Extension) extension
cx231xx v4l2 driver loaded.
usbcore: registered new interface driver cx231xx
cx231xx: Cx231xx Audio Extension initialized
usbcore: registered new interface driver usbvision
USBVision USB Video Device Driver for Linux : 0.9.10
usbcore: registered new interface driver pvrusb2
pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
pvrusb2: Debug mask is 31 (0x1f)
usbcore: registered new interface driver zr364xx
zr364xx: Zoran 364xx
usbcore: registered new interface driver stkwebcam
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
usbcore: registered new interface driver sn9c102
et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09
usbcore: registered new interface driver et61x251
usb 1-1: new high speed USB device number 2 using s5p-ehci
pwc: Philips webcam module version 10.0.14 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCV                                                                                                                     C830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10                                                                                                                      and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and                                                                                                                      VCS-UM100.
usbcore: registered new interface driver Philips webcam
gspca: v2.13.0 registered
usbcore: registered new interface driver benq
usbcore: registered new interface driver conex
usbcore: registered new interface driver cpia1
usbcore: registered new interface driver etoms
usbcore: registered new interface driver finepix
usbcore: registered new interface driver jeilinj
usbcore: registered new interface driver kinect
usbcore: registered new interface driver konica
usbcore: registered new interface driver mars
usbcore: registered new interface driver mr97310a
usbcore: registered new interface driver nw80x
usbcore: registered new interface driver ov519
usbcore: registered new interface driver ov534
usbcore: registered new interface driver ov534_9
usbcore: registered new interface driver pac207
usbcore: registered new interface driver pac7302
usbcore: registered new interface driver pac7311
usbcore: registered new interface driver sn9c2028
usbcore: registered new interface driver sn9c20x
usbcore: registered new interface driver sonixb
usbcore: registered new interface driver sonixj
usbcore: registered new interface driver spca500
usbcore: registered new interface driver spca501
usbcore: registered new interface driver spca505
usbcore: registered new interface driver spca506
usbcore: registered new interface driver spca508
usbcore: registered new interface driver spca561
hub 1-1:1.0: USB hub found
usbcore: registered new interface driver spca1528
hub 1-1:1.0: 4 ports detected
usbcore: registered new interface driver sq905
usbcore: registered new interface driver sq905c
usbcore: registered new interface driver sq930x
usbcore: registered new interface driver sunplus
usbcore: registered new interface driver stk014
usbcore: registered new interface driver stv0680
usbcore: registered new interface driver t613
usbcore: registered new interface driver tv8532
usbcore: registered new interface driver vc032x
usbcore: registered new interface driver vicam
usbcore: registered new interface driver xirlink-cit
usbcore: registered new interface driver zc3xx
usbcore: registered new interface driver ALi m5602
usbcore: registered new interface driver STV06xx
usbcore: registered new interface driver gspca_gl860
usbcore: registered new interface driver hdpvr
usbcore: registered new interface driver s2255
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics

S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5PC11X HPD Driver, (c) 2010 Samsung Electronics
S5PC11X CEC Driver, (c) 2010 Samsung Electronics
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.1.0)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
Bluetooth: Atheros AR30xx firmware driver ver 1.0
usbcore: registered new interface driver ath3k
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
mmc0: no vmmc regulator found
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (80000000 Hz)
mmc1: no vmmc regulator found
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
mmc2: no vmmc regulator found
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
mmc3: no vmmc regulator found
mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
usbcore: registered new interface driver ushc
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1.1: new low speed USB device number 3 using s5p-ehci
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 004G90 3.68 GiB
mmcblk0boot0: mmc0:0001 004G90 partition 1 2.00 MiB
mmcblk0boot1: mmc0:0001 004G90 partition 2 2.00 MiB
 mmcblk0: p2 p3
 mmcblk0boot1: unknown partition table
 mmcblk0boot0: unknown partition table
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
ALSA device list:
  #0: tq210_audio
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Creating netns size=872 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
input: DELL Dell QuietKey Keyboard as /devices/platform/s5p-ehci/usb1/1-1/1-1.1/                                                                                                                     1-1.1:1.0/input/input3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
generic-usb 0003:413C:2106.0001: input: USB HID v1.10 Keyboard [DELL Dell QuietK                                                                                                                     ey Keyboard] on usb-s5p-ehci-1.1/input0
NET: Registered protocol family 33
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
ThumbEE CPU extension supported.
s5pv210_cpufreq_init: S5PV210 cpu-freq driver
regulator_init_complete: pd_mfc_supply: incomplete constraints, leaving on
regulator_init_complete: pd_tv_supply: incomplete constraints, leaving on
usb 1-1.2: new high speed USB device number 4 using s5p-ehci
gx801 2-0055: Warnning: I2C connection might be something wrong!
Goodix-TS 2-005d: Install gt811 driver.
Goodix-TS 2-005d: Driver Release Date:2012-02-08
scsi0 : usb-storage 1-1.2:1.0
Goodix-TS 2-005d: GT811 I2C TEST FAILED!Please check the HARDWARE connect
Goodix-TS 2-005d: Warnning: I2C communication might be ERROR!
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-02 08:34:26 UTC (946802066)
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
Waiting for root device ...
scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk


And then it doesn't go on.
So I don't know what's happening here. It doesn't look to me like it's trying to boot from the USB drive.

Could anybody help this poor dummie giving me a solution for dummies? ;D

Many thanks!
Last edited by Nicoletta on Thu Feb 11, 2016 8:37 am, edited 1 time in total.
Nicoletta
 
Posts: 5
Joined: Tue Feb 09, 2016 5:11 am

Re: How to install ArchLinuxARM on an Embedsky E8 Mini-PC?

Postby tlgimenes » Tue Feb 09, 2016 6:39 pm

Hello Nicoletta !

Well, I don't really know how your board works, but it looks to me it's a very nice board that you have, congrats :)

As far as my knowledge goes, you've done almost all the steps right, and I can suppose you are trying to boot the Arch Linux root filesystem (RFS) from a USB drive.

The only step that is wrong in my opinion is setting the root parameter on the kernel command line as
Code: Select all
root=/dev/usb/hiddev0


Usually, the main storage device ( hard drives, USB drives, etc ) are under the path of /dev/sda. If you want to boot the first partition of this drive, which is the case if you just flashed the ArchLinux image, I think you should just write, on your kernel parameters
Code: Select all
root=/dev/sda1


Please let me know your progress :)
tlgimenes
 
Posts: 6
Joined: Sat Jan 16, 2016 9:37 pm

Re: How to install ArchLinuxARM on an Embedsky E8 Mini-PC?

Postby Nicoletta » Wed Feb 10, 2016 4:19 am

Thank you tlgimenes for your help!

Actually, no, I didn't go as far as flashing the ArchLinux image. I have no idea how to do that on this board :(

I was actually trying to boot directly from the usb thumb drive, but at this point I'm thinking it's not possible on this board (maybe?)

----

In the meantime, I have been experimenting with the help of the Chinese manuals and automatic translation (didn't really help making things clear in a definitive way).

I was able to follow their procedure to install Ubuntu into the board, which of course is incredibly heavy and I don't want it. Also, I succeded in installing Android with their procedure, but it's not suitable to my needs.

The procedure consists in preparing an SD card with some files inside the directory \images
ubuntu1204_20130821_camera.tar.bz2 --> Ubuntu file system
zImage_E8_linux_20130823.bin --> Linux Kernel
EmbedSky.ini --> confing file

The ini file is as follows (in this case I am installing Ubuntu because I verified that the procedure works)

#### This is E8 SD config files ####
operating condition=install
OS Type=ubuntu
LED indicator=off
Beep=off

#### Others ####
bootloader=images\u-boot_E8_20130823.bin
LOGO=images\logo_640x480.bin
#### Others end ####

#### Linux ####
kernel=images\u-boot_E8_20130826.bin
rootfs=images\rootfs_linux_v1.4.tar.bz2
#### Linux end ####

#### Windows CE ####
NK=images\wince\NK.bin
#### Windows CE end ####

#### Android ####
kernel=images/zImage_E8_android_20130823.bin
rootfs=images/rootfs_android_4.0.4_E8_20130823.tar.bz2
#### Android end ####

#### Ubuntu ####
kernel=images/zImage_E8_linux_20130823.bin
rootfs=images/ubuntu1204_20130821_camera.tar.bz2
#### Ubuntu end ####

#### uCOS-II ####
uCOS-II Image=images\uCOS-II\E8_UCOS-II.bin
#### uCOS-II end ####

#### User Application ####
Application Image=images\UserAPPS\E8_Test.bin
#### User Application end #####



Then, I have to power on the board while pressing both side buttons until the E8 main menu shows up:
Code: Select all
OK*** Warning - using default environment


##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 512MB; LCD display size is: 1024X768
Hit any key to stop autoboot:  0

#####       Boot for E8 Main Menu        #####
#####     EmbedSky USB download mode     #####

[1] Download u-boot.bin to board
[2] Download Eboot (eboot.nb0) to board
[3] Download Linux Kernel (zImage.bin) to board
[4] Download LOGO Picture (logo.bin) to board
[5] Download RAMDISK image (ramdisk.gz) to board
[6] Download EXT4FS image (root.ex4) to board
[7] Download Program to SDRAM and Run it
[8] Boot the system
[9] Create partition
[0] Set the boot parameters
[b] Enter Recovery mode
[h] system halt
[n] Enter TFTP download mode menu
[t] Test Linux Image (zImage)
Enter your selection:


Then I have to choose "9" to access the partition menu:

Code: Select all
##### Partition Menu #####
[1] Create 2 partitions
[2] Create 3 partitions
[3] Erase Env partition
[4] Format the 1st partition to FAT32
[5] Format the 2nd partition to EXT4
[6] Format the 3rd partition to EXT4
[q] Return main Menu
Enter your selection:


Then choose from the partition menu the option number 1 to create 2 partitions:
Code: Select all
Enter your selection: 1
dev_num == 0
fdisk is completed

partion #    size(MB)     block start #    block count    partition_Id
   2           258            68013          528990          0x83
   3          3450           597003         7065795          0x83


And then option number 3 to erase env parameters:
Code: Select all
Enter your selection: 3
writing env.. 17, 32
MMC write: dev # 0, block # 17, count 32 ... 32 blocks written: OK
completed


And then from the main menu I choose 0 to set boot parameters:
Code: Select all
##### Parameter Menu #####
[1] Set NFS boot parameter
[2] Set EXT4FS boot parameter for Android
[3] Set EXT4FS boot parameter for Ubuntu
[4] Set EXT4FS boot parameter for Linux
[5] Set RAMFS boot parameter for Recovery mode
[6] Set parameter
[7] View the parameters
[c] Choice lcd type.
[g] Configuration 3g module.
[k] Set default boot kernel type.
[d] Delete parameter
[s] Save the parameters to board.
[q] Return main Menu
Enter your selection:


From the parameters menu I choose the option number 5 to set Set RAMFS boot parameter for Recovery mode:
Code: Select all
Enter your selection: 5
bootargs: initrd=0x30A00000,6M root=/dev/ram0 rw init=/linuxrc console=ttySAC0 mem=512M
bootcmd: movi read kernel C0008000; movi read ramdisk 30A00000 600000; bootm C0008000 30A00000


Back to the main menu, booting the board copies the system from the SD to the flash.

Everything goes OK.

Then, again I power on the board while pressing both side buttons until the E8 main menu shows up and I choose 0 for the boot menu, then the option number 3 “set EXT4FS boot parameters for Ubuntu”:
Code: Select all
Enter your selection: 3
bootargs: noinitrd root=/dev/mmcblk0p3 rw rootfstype=ext4 rootwait init=/init console=ttySAC0
kernel_type: kernel_linux
bootcmd: movi read kernel_linux C0008000; bootm C0008000


At this point, powering on the board will boot Ubuntu.

So I'm wondering: how can I create an archive to substitute the Ubuntu file system "ubuntu1204_20130821_camera.tar.bz2" with an ArchLinux file system? Is this the right question? Am I missing something?
Nicoletta
 
Posts: 5
Joined: Tue Feb 09, 2016 5:11 am

Re: How to install ArchLinuxARM on Embedsky E8 Mini-PC?

Postby tlgimenes » Fri Feb 12, 2016 2:02 pm

Hello again :)

So, I think it's possible to have ArchLinux installed on an external USB stick or on Ubuntu's partition.

Let's first try to install it under Ubuntu's partition because I think it should be easier. All we will need is another PC running linux.

First, download the ArchLinux image. I think ArchLinuxARM-armv7-latest.tar.gz best fits your board, but if you have a better version, please use yours instead. We will use the folder embedsky as our work area. Open a terminal and type
Code: Select all
mkdir embedsky && mkdir embedsky/arch && mkdir embedsky/ubuntu # Create folders
cd embedsky # Enter work area
wget http://br.mirror.archlinuxarm.org/os/ArchLinuxARM-armv7-latest.tar.gz # Download archLinux
tar -zxvf ArchLinuxARM-armv7-latest.tar.gz -C arch # Extract archlinux to arch folder
tar -zxvf path/to/ubuntu/file -C ubuntu # Extract ubuntu to ubuntu folder
cp -r ubuntu/lib/modules arch/lib/ # Copy kernel modules from ubuntu to arch linux
cd arch # Enter arch folder
tar -cjvf ArchLinuxARM-embedsky.tar.bz2 * # Create archLinux image

If everything goes well, you should have now a working copy of ArchLinux in the folder embedsky/arch named ArchLinuxARM-embedsky.tar.bz2

Now we need to modify the configuration file "EmbedSky.ini" . In a text editor, open this file and replace
Code: Select all
#### Ubuntu ####
kernel=images/zImage_E8_linux_20130823.bin
rootfs=images/ubuntu1204_20130821_camera.tar.bz2
#### Ubuntu end ####

to
Code: Select all
#### Ubuntu ####
kernel=images/zImage_E8_linux_20130823.bin
rootfs=images/ArchLinuxARM-embedsky.tar.bz2
#### Ubuntu end ####


Now just copy the file ArchLinuxARM-embedsky.tar.bz2 to the image/ folder on your SD card and follow the same steps of your previous post.

If it works and you still want to install it on a USB stick, please post here bellow and we will try to make it work with a USB stick

cheers \o/
tlgimenes
 
Posts: 6
Joined: Sat Jan 16, 2016 9:37 pm

Re: How to install ArchLinuxARM on Embedsky E8 Mini-PC?

Postby Nicoletta » Mon Feb 15, 2016 7:46 am

Thank you for the amazing help!

I prepared everything like you said, then I transfered the OS to the flash, but when I boot the board... this is what I get:

Code: Select all
##### EmbedSky BIOS for SKY210/TQ210 #####
This Board: SDRAM is 512MB; LCD display size is: 1024X768
Hit any key to stop autoboot:  0
Start Linux ......reading android kernel.. 25649, 12288
MMC read: dev # 0, block # 25649, count 12288 ...12288 blocks read: OK
completed
Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 3.0.8-EmbedSky (root@embedsk-server) (gcc version 4.4.6 (for TQ210 EmbedSky Tech) ) #1 PREEMPT Fri Aug 23 17:05:16 CST 2013
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: TQ210
Memory policy: ECC disabled, Data cache writeback
bootargs no set lcd type! using default a70.
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
sclk_dmc: source is sclk_a2m (0), rate is 200000000
sclk_onenand: source is hclk_dsys (1), rate is 166750000
uclk1: source is mout_mpll (6), rate is 66700000
uclk1: source is mout_mpll (6), rate is 66700000
uclk1: source is mout_mpll (6), rate is 66700000
uclk1: source is mout_mpll (6), rate is 66700000
sclk_mixer: source is sclk_dac (0), rate is 54000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_fimd: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mfc: source is sclk_a2m (0), rate is 200000000
sclk_g2d: source is sclk_a2m (0), rate is 200000000
sclk_g3d: source is sclk_a2m (0), rate is 200000000
sclk_csis: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_pwi: source is ext_xtal (0), rate is 24000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
s5p: 36864 kbytes system memory reserved for mfc at 0x2dc00000, 0-bank base(0x2dc00000)
s5p: 36864 kbytes system memory reserved for mfc at 0x3dbf5000, 1-bank base(0x3dbf5000)
s5p: 6144 kbytes system memory reserved for fimc0 at 0x3d5f5000, 1-bank base(0x3d5f5000)
s5p: 9900 kbytes system memory reserved for fimc1 at 0x3cc4a000, 1-bank base(0x3cc4a000)
s5p: 6144 kbytes system memory reserved for fimc2 at 0x3c64a000, 1-bank base(0x3c64a000)
s5p: 8192 kbytes system memory reserved for jpeg at 0x2d400000, 0-bank base(0x2d400000)
s5p: 11560 kbytes system memory reserved for fimd at 0x3bb00000, 1-bank base(0x3bb00000)
s5p: 1800 kbytes system memory reserved for pmem_gpu1 at 0x2d23e000, 0-bank base(0x2d23e000)
s5p: 8192 kbytes system memory reserved for g2d at 0x2ca3e000, 0-bank base(0x2ca3e000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 98633
Kernel command line: noinitrd root=/dev/mmcblk0p3 rw rootfstype=ext4 rootwait init=/init console=ttySAC0 lcd=X1024Y768
user X1024Y768 lcd.
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 202MB 187MB 0MB = 389MB total
Memory: 384120k/509780k available, 14508k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff000000 - 0xffe00000   (  14 MB)
    vmalloc : 0xe0800000 - 0xfd000000   ( 456 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0037000   ( 188 kB)
      .text : 0xc0037000 - 0xc09161a8   (9085 kB)
      .data : 0xc0918000 - 0xc0973240   ( 365 kB)
       .bss : 0xc0973264 - 0xc09b0d60   ( 247 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:208
VIC @fd000000: id 0x00041192, vendor 0x41
VIC @fd010000: id 0x00041192, vendor 0x41
VIC @fd020000: id 0x00041192, vendor 0x41
VIC @fd030000: id 0x00041192, vendor 0x41
mult[140737]
max_delta_ns[2937815369]
min_delta_ns[30517]
rate[32768]
HZ[256]
Console: colour dummy device 80x30
Calibrating delay loop... 994.84 BogoMIPS (lpj=1941504)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
print_constraints: dummy:
NET: Registered protocol family 16
ENter s3c_adc_set_platdata,devname(s5pv210-adc)

S3C Power Management, Copyright 2004 Simtec Electronics
using VGA1024x768 param
s3c_fb_set_platdata: NUM_OVLY_WIN should be less than default                  window number. set to 0.
smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 4168750, tdiv at 4168750, tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 4168750, tdiv at 4168750, tin=divclk, base 16
print_constraints: pd_audio_supply: 5000 mV normal
print_constraints: pd_tv_supply: 5000 mV normal
print_constraints: pd_lcd_supply: 5000 mV normal
print_constraints: pd_g3d_supply: 5000 mV normal
print_constraints: pd_mfc_supply: 5000 mV normal
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.5: using pins 172 (SDA) and 173 (SCL)
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.2: slave address 0x10
s3c-i2c s3c2440-i2c.2: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource clock_source_systimer
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 12288 bytes)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PMU: registered new PMU device of type 0
cpuidle: phy_regs_save:0x3b4f7000
S5PV210 ADC driver, (c) 2010 Samsung Electronics
Loaded driver for PL330 DMAC-0 s3c-pl330
        DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
Loaded driver for PL330 DMAC-1 s3c-pl330
        DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Loaded driver for PL330 DMAC-2 s3c-pl330
        DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
ashmem: initialized
NTFS driver 2.1.30 [Flags: R/W DEBUG].
msgmni has been set to 750
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
win->id=0, pmem_start=0x3bb00000
s3cfb s3cfb: [fb0] dma: 0x3bb00000, cpu: 0xe1000000, size: 0x009f7000
FIMD src sclk = 166750000
s3cfb s3cfb: registered successfully
Start display and show logo
[VGA] ch7034_attach_adapter.
i2c i2c-2: ch7034 probe
(0x25)=0x1b
hinca_reg=0x3ff,hincb_reg=0x3ff,hinc_reg=0x100000
vinca_reg=0x2ff,vincb_reg=0x2ff,vinc_reg=0x100000
ch7034 probe successfully
i2c-core: driver [ch7034] using legacy suspend method
i2c-core: driver [ch7034] using legacy resume method
s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
console [ttySAC0] enabled
s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
TQ210 Beep driver successfully probed
TQ210 LEDs driver successfully probed
PA FB = 0x3BB00000, bits per pixel = 32
screen width=1024 height=768 va=0xdbb00000 pa=0x3bb00000
xres_virtual = 1024, yres_virtual = 1536, xoffset = 0, yoffset = 0
fb_size=10448896
Back frameBuffer[0].VAddr=dbe00000 PAddr=3be00000 size=3145728
Back frameBuffer[1].VAddr=dc100000 PAddr=3c100000 size=3145728
brd: module loaded
loop: module loaded
S3C NAND Driver, (c) 2008 Samsung Electronics
Unknown NAND Device.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
dm9000 Ethernet Driver, V1.31
dm9000_set_io byte_width 1
dm9000_set_io byte_width 2
dm9000 revision 0x1a io_mode 00
eth0: dm9000c at e082c300,e082e304 IRQ 42 MAC: 00:09:c2:ff:ec:68 (platform data)
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver zd1211rw
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
usbcore: registered new interface driver rt2500usb
usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver rt2800usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: S5P EHCI Host Controller
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5p-ohci s5p-ohci: EXYNOS OHCI Host Controller
s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
 lun0: LUN: removable file: (no medium)
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
mousedev: PS/2 mouse device common for all mice
gpio-keys init
input: gpio-keys as /devices/platform/gpio-keys/input/input0
input: tq210_hs0038 as /devices/virtual/input/input1
Input: S3C GPIO  hs0038 Registered
usbcore: registered new interface driver usbtouchscreen
S5P Touchscreen driver, (c) 2008 Samsung Electronics
Resistance_ts got loaded successfully : 10 bits
input: Resistance_ts as /devices/virtual/input/input2
TSSEL : 1
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
using rtc device, s3c, for alarms
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 250
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
i2c-core: driver [msp3400] using legacy suspend method
i2c-core: driver [msp3400] using legacy resume method
usbcore: registered new interface driver em28xx
em28xx driver loaded
Em28xx: Initialized (Em28xx Audio Extension) extension
cx231xx v4l2 driver loaded.
usbcore: registered new interface driver cx231xx
cx231xx: Cx231xx Audio Extension initialized
usbcore: registered new interface driver usbvision
USBVision USB Video Device Driver for Linux : 0.9.10
usbcore: registered new interface driver pvrusb2
pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
pvrusb2: Debug mask is 31 (0x1f)
usbcore: registered new interface driver zr364xx
zr364xx: Zoran 364xx
usbcore: registered new interface driver stkwebcam
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
usbcore: registered new interface driver sn9c102
et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09
usb 1-1: new high speed USB device number 2 using s5p-ehci
usbcore: registered new interface driver et61x251
pwc: Philips webcam module version 10.0.14 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usbcore: registered new interface driver Philips webcam
gspca: v2.13.0 registered
usbcore: registered new interface driver benq
usbcore: registered new interface driver conex
usbcore: registered new interface driver cpia1
usbcore: registered new interface driver etoms
usbcore: registered new interface driver finepix
usbcore: registered new interface driver jeilinj
usbcore: registered new interface driver kinect
usbcore: registered new interface driver konica
usbcore: registered new interface driver mars
usbcore: registered new interface driver mr97310a
usbcore: registered new interface driver nw80x
usbcore: registered new interface driver ov519
usbcore: registered new interface driver ov534
usbcore: registered new interface driver ov534_9
usbcore: registered new interface driver pac207
usbcore: registered new interface driver pac7302
usbcore: registered new interface driver pac7311
usbcore: registered new interface driver sn9c2028
usbcore: registered new interface driver sn9c20x
usbcore: registered new interface driver sonixb
usbcore: registered new interface driver sonixj
usbcore: registered new interface driver spca500
usbcore: registered new interface driver spca501
usbcore: registered new interface driver spca505
usbcore: registered new interface driver spca506
usbcore: registered new interface driver spca508
usbcore: registered new interface driver spca561
usbcore: registered new interface driver spca1528
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new interface driver sq905
usbcore: registered new interface driver sq905c
usbcore: registered new interface driver sq930x
usbcore: registered new interface driver sunplus
usbcore: registered new interface driver stk014
usbcore: registered new interface driver stv0680
usbcore: registered new interface driver t613
usbcore: registered new interface driver tv8532
usbcore: registered new interface driver vc032x
usbcore: registered new interface driver vicam
usbcore: registered new interface driver xirlink-cit
usbcore: registered new interface driver zc3xx
usbcore: registered new interface driver ALi m5602
usbcore: registered new interface driver STV06xx
usbcore: registered new interface driver gspca_gl860
usbcore: registered new interface driver hdpvr
usbcore: registered new interface driver s2255
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics

S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5PC11X HPD Driver, (c) 2010 Samsung Electronics
S5PC11X CEC Driver, (c) 2010 Samsung Electronics
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.1.0)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
Bluetooth: Atheros AR30xx firmware driver ver 1.0
usbcore: registered new interface driver ath3k
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
mmc0: no vmmc regulator found
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (80000000 Hz)
mmc1: no vmmc regulator found
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
mmc2: no vmmc regulator found
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
mmc3: no vmmc regulator found
mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
usbcore: registered new interface driver ushc
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1.1: new low speed USB device number 3 using s5p-ehci
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 004G90 3.68 GiB
mmcblk0boot0: mmc0:0001 004G90 partition 1 2.00 MiB
mmcblk0boot1: mmc0:0001 004G90 partition 2 2.00 MiB
 mmcblk0: p2 p3
 mmcblk0boot1: unknown partition table
 mmcblk0boot0: unknown partition table
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
ALSA device list:
  #0: tq210_audio
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Creating netns size=872 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
input: DELL Dell QuietKey Keyboard as /devices/platform/s5p-ehci/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
generic-usb 0003:413C:2106.0001: input: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-s5p-ehci-1.1/input0
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
NET: Registered protocol family 33
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
ThumbEE CPU extension supported.
s5pv210_cpufreq_init: S5PV210 cpu-freq driver
regulator_init_complete: pd_mfc_supply: incomplete constraints, leaving on
regulator_init_complete: pd_tv_supply: incomplete constraints, leaving on
gx801 2-0055: Warnning: I2C connection might be something wrong!
Goodix-TS 2-005d: Install gt811 driver.
Goodix-TS 2-005d: Driver Release Date:2012-02-08
usb 1-1.2: new low speed USB device number 4 using s5p-ehci
Goodix-TS 2-005d: GT811 I2C TEST FAILED!Please check the HARDWARE connect
Goodix-TS 2-005d: Warnning: I2C communication might be ERROR!
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:07:54 UTC (946685274)
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
generic-usb 0003:093A:2510.0002: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:3.
Freeing init memory: 188K
Failed to execute /init.  Attempting defaults...
Failed to mount devtmpfs at /dev: No such device
Failed to insert module 'autofs4': No such file or directory
Failed to mount devtmpfs at /dev: No such device
Freezing execution.
usb 1-1.2: USB disconnect, device number 4
usb 1-1.2: new low speed USB device number 5 using s5p-ehci
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
generic-usb 0003:093A:2510.0003: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
usb 1-1.2: USB disconnect, device number 5
usb 1-1.2: new low speed USB device number 6 using s5p-ehci
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
generic-usb 0003:093A:2510.0004: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
usb 1-1.2: USB disconnect, device number 6


Whith these lines in red:
Image

And then nothing :(

Thank you again for all the help, if you have any other ideas on the matter please let me know :)
Nicoletta
 
Posts: 5
Joined: Tue Feb 09, 2016 5:11 am

Re: How to install ArchLinuxARM on Embedsky E8 Mini-PC?

Postby tlgimenes » Mon Feb 15, 2016 10:45 am

Hello again :)

It looks like it couldn't find systemd because we are using the path /init instead of /sbin/init. To fix the problem we could just create a link to systemd. To do this, lets change your ArchLinux .tar.gz file. Go to your embedsky/arch folder that you created on the previous post and type

Code: Select all
ln -s ./lib/systemd/systemd init # Create the link
tar -cjvf ArchLinuxARM-embedsky.tar.bz2 * # Recreate archLinux image


Now everything should work well :)

Keep me posted on how your progress goes !!

cheers \o/
tlgimenes
 
Posts: 6
Joined: Sat Jan 16, 2016 9:37 pm

Re: How to install ArchLinuxARM on Embedsky E8 Mini-PC?

Postby Nicoletta » Mon Feb 15, 2016 12:51 pm

Seems like now it can execute init, but still same error...

Code: Select all
Start Linux ...
reading Linux kernel.. 13361, 12288
MMC read: dev # 0, block # 13361, count 12288 ...12288 blocks read: OK
completed
Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 3.0.8-EmbedSky (root@embedsk-server) (gcc version 4.4.6 (for TQ210 EmbedSky Tech) ) #1 PREEMPT Fri Aug 23 17:05:16 CST 2013
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: TQ210
Memory policy: ECC disabled, Data cache writeback
bootargs no set lcd type! using default a70.
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
sclk_dmc: source is sclk_a2m (0), rate is 200000000
sclk_onenand: source is hclk_dsys (1), rate is 166750000
uclk1: source is mout_mpll (6), rate is 66700000
uclk1: source is mout_mpll (6), rate is 66700000
uclk1: source is mout_mpll (6), rate is 66700000
uclk1: source is mout_mpll (6), rate is 66700000
sclk_mixer: source is sclk_dac (0), rate is 54000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_fimc: source is ext_xtal (0), rate is 24000000
sclk_cam0: source is ext_xtal (0), rate is 24000000
sclk_cam1: source is ext_xtal (0), rate is 24000000
sclk_fimd: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mmc: source is mout_mpll (6), rate is 47642857
sclk_mmc: source is mout_epll (7), rate is 80000000
sclk_mfc: source is sclk_a2m (0), rate is 200000000
sclk_g2d: source is sclk_a2m (0), rate is 200000000
sclk_g3d: source is sclk_a2m (0), rate is 200000000
sclk_csis: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_spi: source is ext_xtal (0), rate is 24000000
sclk_pwi: source is ext_xtal (0), rate is 24000000
sclk_pwm: source is ext_xtal (0), rate is 24000000
s5p: 36864 kbytes system memory reserved for mfc at 0x2dc00000, 0-bank base(0x2dc00000)
s5p: 36864 kbytes system memory reserved for mfc at 0x3dbf5000, 1-bank base(0x3dbf5000)
s5p: 6144 kbytes system memory reserved for fimc0 at 0x3d5f5000, 1-bank base(0x3d5f5000)
s5p: 9900 kbytes system memory reserved for fimc1 at 0x3cc4a000, 1-bank base(0x3cc4a000)
s5p: 6144 kbytes system memory reserved for fimc2 at 0x3c64a000, 1-bank base(0x3c64a000)
s5p: 8192 kbytes system memory reserved for jpeg at 0x2d400000, 0-bank base(0x2d400000)
s5p: 11560 kbytes system memory reserved for fimd at 0x3bb00000, 1-bank base(0x3bb00000)
s5p: 1800 kbytes system memory reserved for pmem_gpu1 at 0x2d23e000, 0-bank base(0x2d23e000)
s5p: 8192 kbytes system memory reserved for g2d at 0x2ca3e000, 0-bank base(0x2ca3e000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 98633
Kernel command line: noinitrd root=/dev/mmcblk0p3 rw rootfstype=ext4 rootwait init=/init console=ttySAC0 lcd=X1024Y768
user X1024Y768 lcd.
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 202MB 187MB 0MB = 389MB total
Memory: 384120k/509780k available, 14508k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff000000 - 0xffe00000   (  14 MB)
    vmalloc : 0xe0800000 - 0xfd000000   ( 456 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0037000   ( 188 kB)
      .text : 0xc0037000 - 0xc09161a8   (9085 kB)
      .data : 0xc0918000 - 0xc0973240   ( 365 kB)
       .bss : 0xc0973264 - 0xc09b0d60   ( 247 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:208
VIC @fd000000: id 0x00041192, vendor 0x41
VIC @fd010000: id 0x00041192, vendor 0x41
VIC @fd020000: id 0x00041192, vendor 0x41
VIC @fd030000: id 0x00041192, vendor 0x41
mult[140737]
max_delta_ns[2937815369]
min_delta_ns[30517]
rate[32768]
HZ[256]
Console: colour dummy device 80x30
Calibrating delay loop... 994.84 BogoMIPS (lpj=1941504)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
print_constraints: dummy:
NET: Registered protocol family 16
ENter s3c_adc_set_platdata,devname(s5pv210-adc)

S3C Power Management, Copyright 2004 Simtec Electronics
using VGA1024x768 param
s3c_fb_set_platdata: NUM_OVLY_WIN should be less than default                  window number. set to 0.
smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
S5PV210: Initializing architecture
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 4168750, tdiv at 4168750, tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 4168750, tdiv at 4168750, tin=divclk, base 16
print_constraints: pd_audio_supply: 5000 mV normal
print_constraints: pd_tv_supply: 5000 mV normal
print_constraints: pd_lcd_supply: 5000 mV normal
print_constraints: pd_g3d_supply: 5000 mV normal
print_constraints: pd_mfc_supply: 5000 mV normal
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.5: using pins 172 (SDA) and 173 (SCL)
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.2: slave address 0x10
s3c-i2c s3c2440-i2c.2: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource clock_source_systimer
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 12288 bytes)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PMU: registered new PMU device of type 0
cpuidle: phy_regs_save:0x3b4bf000
S5PV210 ADC driver, (c) 2010 Samsung Electronics
Loaded driver for PL330 DMAC-0 s3c-pl330
        DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
Loaded driver for PL330 DMAC-1 s3c-pl330
        DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
Loaded driver for PL330 DMAC-2 s3c-pl330
        DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
ashmem: initialized
NTFS driver 2.1.30 [Flags: R/W DEBUG].
msgmni has been set to 750
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
win->id=0, pmem_start=0x3bb00000
s3cfb s3cfb: [fb0] dma: 0x3bb00000, cpu: 0xe1000000, size: 0x009f7000
FIMD src sclk = 166750000
s3cfb s3cfb: registered successfully
Start display and show logo
[VGA] ch7034_attach_adapter.
i2c i2c-2: ch7034 probe
(0x25)=0x1b
hinca_reg=0x3ff,hincb_reg=0x3ff,hinc_reg=0x100000
vinca_reg=0x2ff,vincb_reg=0x2ff,vinc_reg=0x100000
ch7034 probe successfully
i2c-core: driver [ch7034] using legacy suspend method
i2c-core: driver [ch7034] using legacy resume method
s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
console [ttySAC0] enabled
s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
TQ210 Beep driver successfully probed
TQ210 LEDs driver successfully probed
PA FB = 0x3BB00000, bits per pixel = 32
screen width=1024 height=768 va=0xdbb00000 pa=0x3bb00000
xres_virtual = 1024, yres_virtual = 1536, xoffset = 0, yoffset = 0
fb_size=10448896
Back frameBuffer[0].VAddr=dbe00000 PAddr=3be00000 size=3145728
Back frameBuffer[1].VAddr=dc100000 PAddr=3c100000 size=3145728
brd: module loaded
loop: module loaded
S3C NAND Driver, (c) 2008 Samsung Electronics
Unknown NAND Device.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
dm9000 Ethernet Driver, V1.31
dm9000_set_io byte_width 1
dm9000_set_io byte_width 2
dm9000 revision 0x1a io_mode 00
eth0: dm9000c at e082c300,e082e304 IRQ 42 MAC: 00:09:c2:ff:ec:68 (platform data)
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver zd1211rw
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
usbcore: registered new interface driver rt2500usb
usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver rt2800usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5p-ehci s5p-ehci: S5P EHCI Host Controller
s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5p-ohci s5p-ohci: EXYNOS OHCI Host Controller
s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
 lun0: LUN: removable file: (no medium)
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
mousedev: PS/2 mouse device common for all mice
gpio-keys init
input: gpio-keys as /devices/platform/gpio-keys/input/input0
input: tq210_hs0038 as /devices/virtual/input/input1
Input: S3C GPIO  hs0038 Registered
usbcore: registered new interface driver usbtouchscreen
S5P Touchscreen driver, (c) 2008 Samsung Electronics
Resistance_ts got loaded successfully : 10 bits
input: Resistance_ts as /devices/virtual/input/input2
TSSEL : 1
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
using rtc device, s3c, for alarms
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 250
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
i2c-core: driver [msp3400] using legacy suspend method
i2c-core: driver [msp3400] using legacy resume method
usbcore: registered new interface driver em28xx
em28xx driver loaded
Em28xx: Initialized (Em28xx Audio Extension) extension
cx231xx v4l2 driver loaded.
usbcore: registered new interface driver cx231xx
cx231xx: Cx231xx Audio Extension initialized
usbcore: registered new interface driver usbvision
USBVision USB Video Device Driver for Linux : 0.9.10
usbcore: registered new interface driver pvrusb2
pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
pvrusb2: Debug mask is 31 (0x1f)
usbcore: registered new interface driver zr364xx
zr364xx: Zoran 364xx
usbcore: registered new interface driver stkwebcam
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
usbcore: registered new interface driver sn9c102
et61x251: V4L2 driver for ET61X[12]51 PC Camera Controllers v1:1.09
usb 1-1: new high speed USB device number 2 using s5p-ehci
usbcore: registered new interface driver et61x251
pwc: Philips webcam module version 10.0.14 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usbcore: registered new interface driver Philips webcam
gspca: v2.13.0 registered
usbcore: registered new interface driver benq
usbcore: registered new interface driver conex
usbcore: registered new interface driver cpia1
usbcore: registered new interface driver etoms
usbcore: registered new interface driver finepix
usbcore: registered new interface driver jeilinj
usbcore: registered new interface driver kinect
usbcore: registered new interface driver konica
usbcore: registered new interface driver mars
usbcore: registered new interface driver mr97310a
usbcore: registered new interface driver nw80x
usbcore: registered new interface driver ov519
usbcore: registered new interface driver ov534
usbcore: registered new interface driver ov534_9
usbcore: registered new interface driver pac207
usbcore: registered new interface driver pac7302
usbcore: registered new interface driver pac7311
usbcore: registered new interface driver sn9c2028
usbcore: registered new interface driver sn9c20x
usbcore: registered new interface driver sonixb
usbcore: registered new interface driver sonixj
usbcore: registered new interface driver spca500
usbcore: registered new interface driver spca501
usbcore: registered new interface driver spca505
usbcore: registered new interface driver spca506
usbcore: registered new interface driver spca508
usbcore: registered new interface driver spca561
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new interface driver spca1528
usbcore: registered new interface driver sq905
usbcore: registered new interface driver sq905c
usbcore: registered new interface driver sq930x
usbcore: registered new interface driver sunplus
usbcore: registered new interface driver stk014
usbcore: registered new interface driver stv0680
usbcore: registered new interface driver t613
usbcore: registered new interface driver tv8532
usbcore: registered new interface driver vc032x
usbcore: registered new interface driver vicam
usbcore: registered new interface driver xirlink-cit
usbcore: registered new interface driver zc3xx
usbcore: registered new interface driver ALi m5602
usbcore: registered new interface driver STV06xx
usbcore: registered new interface driver gspca_gl860
usbcore: registered new interface driver hdpvr
usbcore: registered new interface driver s2255
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics

S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5PC11X HPD Driver, (c) 2010 Samsung Electronics
S5PC11X CEC Driver, (c) 2010 Samsung Electronics
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.1.0)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
Bluetooth: Atheros AR30xx firmware driver ver 1.0
usbcore: registered new interface driver ath3k
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
mmc0: no vmmc regulator found
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (80000000 Hz)
mmc1: no vmmc regulator found
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
mmc2: no vmmc regulator found
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
mmc3: no vmmc regulator found
mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
usbcore: registered new interface driver ushc
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1.1: new low speed USB device number 3 using s5p-ehci
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 004G90 3.68 GiB
mmcblk0boot0: mmc0:0001 004G90 partition 1 2.00 MiB
mmcblk0boot1: mmc0:0001 004G90 partition 2 2.00 MiB
 mmcblk0: p2 p3
 mmcblk0boot1: unknown partition table
 mmcblk0boot0: unknown partition table
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
asoc: wm8960-hifi <-> samsung-i2s.0 mapping ok
ALSA device list:
  #0: tq210_audio
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Creating netns size=872 id=0
IPVS: ipvs loaded.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
input: DELL Dell QuietKey Keyboard as /devices/platform/s5p-ehci/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
generic-usb 0003:413C:2106.0001: input: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-s5p-ehci-1.1/input0
NET: Registered protocol family 33
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
ThumbEE CPU extension supported.
s5pv210_cpufreq_init: S5PV210 cpu-freq driver
regulator_init_complete: pd_mfc_supply: incomplete constraints, leaving on
regulator_init_complete: pd_tv_supply: incomplete constraints, leaving on
gx801 2-0055: Warnning: I2C connection might be something wrong!
Goodix-TS 2-005d: Install gt811 driver.
Goodix-TS 2-005d: Driver Release Date:2012-02-08
usb 1-1.2: new low speed USB device number 4 using s5p-ehci
Goodix-TS 2-005d: GT811 I2C TEST FAILED!Please check the HARDWARE connect
Goodix-TS 2-005d: Warnning: I2C communication might be ERROR!
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 04:04:56 UTC (946699496)
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
generic-usb 0003:093A:2510.0002: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:3.
Freeing init memory: 188K
Failed to mount devtmpfs at /dev: No such device
Failed to insert module 'autofs4': No such file or directory
Failed to mount devtmpfs at /dev: No such device
Freezing execution.
usb 1-1.2: USB disconnect, device number 4
usb 1-1.2: new low speed USB device number 5 using s5p-ehci
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
generic-usb 0003:093A:2510.0003: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
usb 1-1.2: USB disconnect, device number 5
usb 1-1.2: new low speed USB device number 6 using s5p-ehci
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
generic-usb 0003:093A:2510.0004: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
usb 1-1.2: USB disconnect, device number 6
usb 1-1.2: new low speed USB device number 7 using s5p-ehci
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
generic-usb 0003:093A:2510.0005: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
usb 1-1.2: USB disconnect, device number 7
usb 1-1.2: new low speed USB device number 8 using s5p-ehci
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input8
generic-usb 0003:093A:2510.0006: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
usb 1-1.2: USB disconnect, device number 8
usb 1-1.2: new low speed USB device number 9 using s5p-ehci
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input9
generic-usb 0003:093A:2510.0007: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
usb 1-1.2: USB disconnect, device number 9
usb 1-1.2: new low speed USB device number 10 using s5p-ehci
input: PixArt USB Optical Mouse as /devices/platform/s5p-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input10
generic-usb 0003:093A:2510.0008: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ehci-1.2/input0
usb 1-1.2: USB disconnect, device number 10


Emphasis on the lines:

Image

Thank you again for everything!
Nicoletta
 
Posts: 5
Joined: Tue Feb 09, 2016 5:11 am

Re: How to install ArchLinuxARM on Embedsky E8 Mini-PC?

Postby tlgimenes » Mon Feb 15, 2016 8:07 pm

Hello :)

I may have some bad news for you. I was reading this post http://unix.stackexchange.com/questions/116887/self-built-kernel-failed-to-mount-dev-no-such-device and they say this happens because the linux kernel you are using doesn't have the CONFIG_DEVTMPFS variable set on the kernel configuration file.

If it is true, you have three possibilities:
1) Recompile your kernel with this option set, if the kernel you are using supports this feature
2) Compile a mainline kernel which won't have support for some on your board's devices
3) Get someone with more knowledge than me to help you

Wish you lucky with your board ...
tlgimenes
 
Posts: 6
Joined: Sat Jan 16, 2016 9:37 pm

Re: How to install ArchLinuxARM on Embedsky E8 Mini-PC?

Postby Nicoletta » Tue Feb 16, 2016 2:48 am

I'll look into Option 1.
Thank you again for all your help, I learned a lot!
Nicoletta
 
Posts: 5
Joined: Tue Feb 09, 2016 5:11 am

Re: How to install ArchLinuxARM on Embedsky E8 Mini-PC?

Postby tlgimenes » Sun Feb 21, 2016 2:21 pm

You are welcome, hope you manage to compile your kelnel.

Please keep me updated :)
tlgimenes
 
Posts: 6
Joined: Sat Jan 16, 2016 9:37 pm


Return to Community Supported

Who is online

Users browsing this forum: No registered users and 1 guest