by orip » Sun Mar 27, 2016 7:49 pm
Yes, there are some errors on boot (in dmesg), I hope they're somewhat helpful (attached below).
Also I just re-flashed just the SD card (didtn't do a full reinstall - the system boots normally off of an SSD), so I was able to downgrade the kernel, which fixed the PCI-e issue, however it breaks some other important stuff overall does more harm than good.
$this->bbcode_second_pass_code('', '$ dmesg | grep pci
[ 0.000000] Kernel command line: root=PARTUUID=0008410f-01 rootwait rw console=tty1 console=ttymxc0,115200 consoleblank=0 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=16 dmfc=3 ahci_imx.hotplug=1 pci=nomsi loop.max_part=15
[ 0.472548] imx6q-pcie 1ffc000.pcie: phy link never came up
[ 0.472577] imx6q-pcie 1ffc000.pcie: Failed to bring link up!
[ 0.472596] imx6q-pcie 1ffc000.pcie: failed to initialize host
[ 0.472733] imx6q-pcie: probe of 1ffc000.pcie failed with error -22
[ 1.758149] ehci-pci: EHCI PCI platform driver
[ 1.758237] ohci-pci: OHCI PCI platform driver')