Wandboard Quad: Bad CRC by using current u-boot.img and SPL

This forum is for supported devices using an ARMv7 Freescale SoC.

Wandboard Quad: Bad CRC by using current u-boot.img and SPL

Postby Peedy » Thu Dec 29, 2016 6:07 pm

Hello,

I tried following Instructions of https://archlinuxarm.org/platforms/armv ... /wandboard.

By using both files out of http://os.archlinuxarm.org/os/imx6/boot/wandboard/ the boot process tells by trying to boot from sdcard: Bad CRC.

Files broken?
Peedy
 
Posts: 12
Joined: Fri Jan 02, 2015 3:39 pm

Re: Wandboard Quad: Bad CRC by using current u-boot.img and

Postby selex » Wed Feb 08, 2017 6:50 pm

Did you find a solution?
selex
 
Posts: 5
Joined: Fri Oct 10, 2014 11:11 pm

Re: Wandboard Quad: Bad CRC by using current u-boot.img and

Postby mwrshl » Sat Feb 25, 2017 10:01 pm

I'm running into the same problem with a Wandboard Solo. Looking at the u-boot environment, I see it is looking for imx6dl-wandboard.dtb in a number of prefixes:

$this->bbcode_second_pass_code('', '
=> printenv efi_dtb_prefixes
efi_dtb_prefixes=/ /dtb/ /dtb/current/
')

Hover, the file is in /boot/dtbs/.

Simply changing efi_dtb_prefixes doesn't fix it, unfortunately.

Does anyone have the current u-boot.img and SPL working on a wandboard?
mwrshl
 
Posts: 1
Joined: Sat Feb 25, 2017 9:54 pm


Return to Freescale

Who is online

Users browsing this forum: No registered users and 4 guests