by Lestrad » Tue Jun 16, 2020 2:33 pm
Hello to all. Well, I just installed the new cable and it didn't take long for the HDD to disappear again, with similar or identical errors. lsblk at first showed no trace of it, but now, a half-hour or so later, it shows up as /dev/sdc, but with no partitions showing.
Below is the result of dmesg | grep ata.1:
$this->bbcode_second_pass_code('', '
[alarm@alarm ~]$ dmesg | grep ata1.
[ 3.597717] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 72
[ 4.078920] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.119795] ata1.00: ATA-10: ST6000DM003-2CY186, 0001, max UDMA/133
[ 4.126092] ata1.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32)
[ 4.184414] ata1.00: configured for UDMA/133
[ 17.346906] ata1.00: exception Emask 0x10 SAct 0x8000 SErr 0x10200 action 0xe frozen
[ 17.354689] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 17.360116] ata1: SError: { Persist PHYRdyChg }
[ 17.364677] ata1.00: failed command: READ FPDMA QUEUED
[ 17.369851] ata1.00: cmd 60/08:78:b0:d2:5a/00:00:00:00:00/40 tag 15 ncq dma 4096 in
[ 17.385519] ata1.00: status: { DRDY }
[ 17.389213] ata1: hard resetting link
[ 27.387213] ata1: softreset failed (1st FIS failed)
[ 27.392124] ata1: hard resetting link
[ 28.266889] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 28.353813] ata1.00: configured for UDMA/133
[ 28.398734] ata1: EH complete
[ 28.682891] ata1.00: exception Emask 0x10 SAct 0x80000001 SErr 0x10200 action 0xe frozen
[ 28.691019] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 28.696452] ata1: SError: { Persist PHYRdyChg }
[ 28.701014] ata1.00: failed command: READ FPDMA QUEUED
[ 28.706191] ata1.00: cmd 60/00:00:30:21:5f/01:00:00:00:00/40 tag 0 ncq dma 131072 in
[ 28.721950] ata1.00: status: { DRDY }
[ 28.725642] ata1.00: failed command: READ FPDMA QUEUED
[ 28.730819] ata1.00: cmd 60/00:f8:30:20:5f/01:00:00:00:00/40 tag 31 ncq dma 131072 in
[ 28.746662] ata1.00: status: { DRDY }
[ 28.750354] ata1: hard resetting link
[ 38.747754] ata1: softreset failed (1st FIS failed)
[ 38.752664] ata1: hard resetting link
[ 39.626890] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 39.713910] ata1.00: configured for UDMA/133
[ 39.799528] ata1: EH complete
[ 40.107004] ata1.00: exception Emask 0x10 SAct 0x18 SErr 0x10200 action 0xe frozen
[ 40.114636] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 40.120106] ata1: SError: { Persist PHYRdyChg }
[ 40.124677] ata1.00: failed command: READ FPDMA QUEUED
[ 40.129855] ata1.00: cmd 60/00:18:30:a7:5f/01:00:00:00:00/40 tag 3 ncq dma 131072 in
[ 40.145619] ata1.00: status: { DRDY }
[ 40.149310] ata1.00: failed command: READ FPDMA QUEUED
[ 40.154485] ata1.00: cmd 60/00:20:30:a8:5f/01:00:00:00:00/40 tag 4 ncq dma 131072 in
[ 40.170272] ata1.00: status: { DRDY }
[ 40.173973] ata1: hard resetting link
[ 50.171671] ata1: softreset failed (1st FIS failed)
[ 50.176585] ata1: hard resetting link
[ 51.050883] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 51.137766] ata1.00: configured for UDMA/133
[ 51.223190] ata1: EH complete
[ 51.426897] ata1: limiting SATA link speed to 1.5 Gbps
[ 51.432075] ata1.00: exception Emask 0x10 SAct 0x60 SErr 0x10200 action 0xe frozen
[ 51.439672] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 51.445101] ata1: SError: { Persist PHYRdyChg }
[ 51.449659] ata1.00: failed command: READ FPDMA QUEUED
[ 51.454834] ata1.00: cmd 60/00:28:30:da:5f/01:00:00:00:00/40 tag 5 ncq dma 131072 in
[ 51.470602] ata1.00: status: { DRDY }
[ 51.474290] ata1.00: failed command: READ FPDMA QUEUED
[ 51.479461] ata1.00: cmd 60/00:30:30:db:5f/01:00:00:00:00/40 tag 6 ncq dma 131072 in
[ 51.495213] ata1.00: status: { DRDY }
[ 51.498906] ata1: hard resetting link
[ 61.499474] ata1: softreset failed (1st FIS failed)
[ 61.504388] ata1: hard resetting link
[ 62.378883] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 62.465816] ata1.00: configured for UDMA/133
[ 62.551196] ata1: EH complete
[ 62.966901] ata1.00: exception Emask 0x10 SAct 0x30000000 SErr 0x10200 action 0xe frozen
[ 62.975054] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 62.980487] ata1: SError: { Persist PHYRdyChg }
[ 62.985085] ata1.00: failed command: READ FPDMA QUEUED
[ 62.990265] ata1.00: cmd 60/00:e0:30:a7:60/01:00:00:00:00/40 tag 28 ncq dma 131072 in
[ 63.006140] ata1.00: status: { DRDY }
[ 63.009833] ata1.00: failed command: READ FPDMA QUEUED
[ 63.015034] ata1.00: cmd 60/00:e8:30:a8:60/01:00:00:00:00/40 tag 29 ncq dma 131072 in
[ 63.030903] ata1.00: status: { DRDY }
[ 63.034576] ata1: hard resetting link
[ 73.030874] ata1: softreset failed (1st FIS failed)
[ 73.035781] ata1: hard resetting link
[ 73.910885] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 73.997884] ata1.00: configured for UDMA/133
[ 74.083935] ata1: EH complete
[12378.055864] ata1.00: exception Emask 0x10 SAct 0x10000 SErr 0x10200 action 0xe frozen
[12378.063751] ata1.00: irq_stat 0x00400000, PHY RDY changed
[12378.069237] ata1: SError: { Persist PHYRdyChg }
[12378.073809] ata1.00: failed command: READ FPDMA QUEUED
[12378.078979] ata1.00: cmd 60/08:80:98:1a:64/00:00:00:00:00/40 tag 16 ncq dma 4096 in
[12378.094645] ata1.00: status: { DRDY }
[12378.098335] ata1: hard resetting link
[12380.255790] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[12385.403666] ata1.00: qc timeout (cmd 0xec)
[12385.407806] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[12385.413931] ata1.00: revalidation failed (errno=-5)
[12385.418844] ata1: hard resetting link
[12385.899615] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[12390.861772] ata1.00: model number mismatch 'ST6000DM003-2CY186' != 'ST6000DM003'
[12390.869206] ata1.00: revalidation failed (errno=-19)
[12390.907457] ata1: hard resetting link
[12391.387454] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[12391.393768] ata1.00: model number mismatch 'ST6000DM003-2CY186' != 'ST6000DM003'
[12391.401197] ata1.00: revalidation failed (errno=-19)
[12391.406189] ata1.00: disabled
[12396.411314] ata1: hard resetting link
[12396.891286] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[12396.897656] ata1.00: failed to read native max address (err_mask=0x1)
[12396.904132] ata1.00: HPA support seems broken, skipping HPA handling
[12396.910525] ata1.00: ATA-8: ST6000DM003, 0001, max UDMA/133
[12396.916126] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32)
[12396.923048] ata1.00: configured for UDMA/133 (device error ignored)
[12396.970007] ata1: EH complete
[12396.973022] ata1.00: detaching (SCSI 0:0:0:0)
[12397.083622] ata1.00: device reported invalid CHS sector 0
[12397.127321] ata1.00: NCQ disabled due to excessive errors
[12397.133084] ata1.00: device reported invalid CHS sector 0
[12397.171709] ata1.00: device reported invalid CHS sector 0
[12397.231286] ata1.00: device reported invalid CHS sector 0
[12397.363316] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.369856] ata1.00: irq_stat 0x40000000
[12397.373814] ata1.00: failed command: READ DMA
[12397.378234] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 21 dma 4096 in
[12397.393414] ata1.00: status: { DRDY SENSE ERR }
[12397.397970] ata1.00: error: { ABRT }
[12397.401862] ata1.00: configured for UDMA/133 (device error ignored)
[12397.408244] ata1: EH complete
[12397.431264] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.437756] ata1.00: irq_stat 0x40000000
[12397.441716] ata1.00: failed command: READ DMA
[12397.446137] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 23 dma 4096 in
[12397.461316] ata1.00: status: { DRDY SENSE ERR }
[12397.465898] ata1.00: error: { ABRT }
[12397.469750] ata1.00: configured for UDMA/133 (device error ignored)
[12397.476127] ata1: EH complete
[12397.495255] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.501755] ata1.00: irq_stat 0x40000000
[12397.505710] ata1.00: failed command: READ DMA
[12397.510131] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 30 dma 4096 in
[12397.525306] ata1.00: status: { DRDY SENSE ERR }
[12397.529890] ata1.00: error: { ABRT }
[12397.533741] ata1.00: configured for UDMA/133 (device error ignored)
[12397.540117] ata1: EH complete
[12397.559257] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.565748] ata1.00: irq_stat 0x40000000
[12397.569701] ata1.00: failed command: READ DMA
[12397.574216] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 1 dma 4096 in
[12397.589304] ata1.00: status: { DRDY SENSE ERR }
[12397.593890] ata1.00: error: { ABRT }
[12397.597739] ata1.00: configured for UDMA/133 (device error ignored)
[12397.604114] ata1: EH complete
[12397.623254] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.629742] ata1.00: irq_stat 0x40000000
[12397.633701] ata1.00: failed command: READ DMA
[12397.638121] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 3 dma 4096 in
[12397.653211] ata1.00: status: { DRDY SENSE ERR }
[12397.657797] ata1.00: error: { ABRT }
[12397.661704] ata1.00: configured for UDMA/133 (device error ignored)
[12397.668075] ata1: EH complete
[12397.687254] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.693745] ata1.00: irq_stat 0x40000000
[12397.697702] ata1.00: failed command: READ DMA
[12397.702123] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 5 dma 4096 in
[12397.717214] ata1.00: status: { DRDY SENSE ERR }
[12397.721800] ata1.00: error: { ABRT }
[12397.725645] ata1.00: configured for UDMA/133 (device error ignored)
[12397.771576] ata1: EH complete
[12397.803263] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.809762] ata1.00: irq_stat 0x40000000
[12397.813716] ata1.00: failed command: READ DMA
[12397.818135] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 8 dma 4096 in
[12397.833227] ata1.00: status: { DRDY SENSE ERR }
[12397.837815] ata1.00: error: { ABRT }
[12397.841676] ata1.00: configured for UDMA/133 (device error ignored)
[12397.848054] ata1: EH complete
[12397.867251] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.873741] ata1.00: irq_stat 0x40000000
[12397.877699] ata1.00: failed command: READ DMA
[12397.882115] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 10 dma 4096 in
[12397.897289] ata1.00: status: { DRDY SENSE ERR }
[12397.901872] ata1.00: error: { ABRT }
[12397.905718] ata1.00: configured for UDMA/133 (device error ignored)
[12397.912085] ata1: EH complete
[12397.931242] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.937731] ata1.00: irq_stat 0x40000000
[12397.941688] ata1.00: failed command: READ DMA
[12397.946110] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 12 dma 4096 in
[12397.961286] ata1.00: status: { DRDY SENSE ERR }
[12397.965871] ata1.00: error: { ABRT }
[12397.969712] ata1.00: configured for UDMA/133 (device error ignored)
[12397.976079] ata1: EH complete
[12398.003243] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.009735] ata1.00: irq_stat 0x40000000
[12398.013695] ata1.00: failed command: READ DMA
[12398.018114] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 14 dma 4096 in
[12398.033290] ata1.00: status: { DRDY SENSE ERR }
[12398.037876] ata1.00: error: { ABRT }
[12398.041720] ata1.00: configured for UDMA/133 (device error ignored)
[12398.048089] ata1: EH complete
[12398.067238] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.073725] ata1.00: irq_stat 0x40000000
[12398.077681] ata1.00: failed command: READ DMA
[12398.082102] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 16 dma 4096 in
[12398.097279] ata1.00: status: { DRDY SENSE ERR }
[12398.101871] ata1.00: error: { ABRT }
[12398.105722] ata1.00: configured for UDMA/133 (device error ignored)
[12398.112096] ata1: EH complete
[12398.131239] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.137730] ata1.00: irq_stat 0x40000000
[12398.141687] ata1.00: failed command: READ DMA
[12398.146106] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 18 dma 4096 in
[12398.161283] ata1.00: status: { DRDY SENSE ERR }
[12398.165868] ata1.00: error: { ABRT }
[12398.169712] ata1.00: configured for UDMA/133 (device error ignored)
[12398.221599] ata1: EH complete
[12398.267240] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.273727] ata1.00: irq_stat 0x40000000
[12398.277688] ata1.00: failed command: READ DMA
[12398.282111] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 31 dma 4096 in
[12398.297283] ata1.00: status: { DRDY SENSE ERR }
[12398.301869] ata1.00: error: { ABRT }
[12398.305725] ata1.00: configured for UDMA/133 (device error ignored)
[12398.312100] ata1: EH complete
[12398.331240] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.337732] ata1.00: irq_stat 0x40000000
[12398.341684] ata1.00: failed command: READ DMA
[12398.346103] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 1 dma 4096 in
[12398.361193] ata1.00: status: { DRDY SENSE ERR }
[12398.365779] ata1.00: error: { ABRT }
[12398.369624] ata1.00: configured for UDMA/133 (device error ignored)
[12398.375992] ata1: EH complete
[12398.395234] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.401723] ata1.00: irq_stat 0x40000000
[12398.405679] ata1.00: failed command: READ DMA
[12398.410099] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 3 dma 4096 in
[12398.425187] ata1.00: status: { DRDY SENSE ERR }
[12398.429777] ata1.00: error: { ABRT }
[12398.433623] ata1.00: configured for UDMA/133 (device error ignored)
[12398.439991] ata1: EH complete
[12398.459226] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.465714] ata1.00: irq_stat 0x40000000
[12398.469668] ata1.00: failed command: READ DMA
[12398.474106] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 5 dma 4096 in
[12398.489172] ata1.00: status: { DRDY SENSE ERR }
[12398.493728] ata1.00: error: { ABRT }
[12398.497567] ata1.00: configured for UDMA/133 (device error ignored)
[12398.503916] ata1: EH complete
[12398.523228] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.529693] ata1.00: irq_stat 0x40000000
[12398.533646] ata1.00: failed command: READ DMA
[12398.538038] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 19 dma 4096 in
[12398.553186] ata1.00: status: { DRDY SENSE ERR }
[12398.557743] ata1.00: error: { ABRT }
[12398.561583] ata1.00: configured for UDMA/133 (device error ignored)
[12398.567920] ata1: EH complete
[12398.583225] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.589692] ata1.00: irq_stat 0x40000000
[12398.593644] ata1.00: failed command: READ DMA
[12398.598036] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 21 dma 4096 in
[12398.613186] ata1.00: status: { DRDY SENSE ERR }
[12398.617743] ata1.00: error: { ABRT }
[12398.621578] ata1.00: configured for UDMA/133 (device error ignored)
[12398.667519] ata1: EH complete
[12398.703224] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.709692] ata1.00: irq_stat 0x40000000
[12398.713642] ata1.00: failed command: READ DMA
[12398.718040] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 22 dma 4096 in
[12398.733187] ata1.00: status: { DRDY SENSE ERR }
[12398.737742] ata1.00: error: { ABRT }
[12398.741586] ata1.00: configured for UDMA/133 (device error ignored)
[12398.747962] ata1: EH complete
[12398.767222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.773690] ata1.00: irq_stat 0x40000000
[12398.777642] ata1.00: failed command: READ DMA
[12398.782036] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 24 dma 4096 in
[12398.797184] ata1.00: status: { DRDY SENSE ERR }
[12398.801739] ata1.00: error: { ABRT }
[12398.805573] ata1.00: configured for UDMA/133 (device error ignored)
[12398.811912] ata1: EH complete
[12398.831218] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.837692] ata1.00: irq_stat 0x40000000
[12398.841645] ata1.00: failed command: READ DMA
[12398.846040] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 26 dma 4096 in
[12398.861191] ata1.00: status: { DRDY SENSE ERR }
[12398.865746] ata1.00: error: { ABRT }
[12398.869585] ata1.00: configured for UDMA/133 (device error ignored)
[12398.875921] ata1: EH complete
[12398.895223] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.901693] ata1.00: irq_stat 0x40000000
[12398.905647] ata1.00: failed command: READ DMA
[12398.910039] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 28 dma 4096 in
[12398.925185] ata1.00: status: { DRDY SENSE ERR }
[12398.929741] ata1.00: error: { ABRT }
[12398.933576] ata1.00: configured for UDMA/133 (device error ignored)
[12398.939912] ata1: EH complete
[12398.955214] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.961681] ata1.00: irq_stat 0x40000000
[12398.965635] ata1.00: failed command: READ DMA
[12398.970025] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 30 dma 4096 in
[12398.985173] ata1.00: status: { DRDY SENSE ERR }
[12398.989729] ata1.00: error: { ABRT }
[12398.993557] ata1.00: configured for UDMA/133 (device error ignored)
[12398.999892] ata1: EH complete
[12399.015212] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.021678] ata1.00: irq_stat 0x40000000
[12399.025630] ata1.00: failed command: READ DMA
[12399.030023] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in
[12399.045087] ata1.00: status: { DRDY SENSE ERR }
[12399.049646] ata1.00: error: { ABRT }
[12399.053487] ata1.00: configured for UDMA/133 (device error ignored)
[12399.099095] ata1: EH complete
[12399.187233] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.193739] ata1.00: irq_stat 0x40000000
[12399.198445] ata1.00: failed command: READ DMA EXT
[12399.203245] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 8 dma 4096 in
[12399.218338] ata1.00: status: { DRDY SENSE ERR }
[12399.222924] ata1.00: error: { ABRT }
[12399.226827] ata1.00: configured for UDMA/133 (device error ignored)
[12399.273854] ata1: EH complete
[12399.311203] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.317678] ata1.00: irq_stat 0x40000000
[12399.321659] ata1.00: failed command: READ DMA EXT
[12399.326409] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 13 dma 4096 in
[12399.341561] ata1.00: status: { DRDY SENSE ERR }
[12399.346115] ata1.00: error: { ABRT }
[12399.349981] ata1.00: configured for UDMA/133 (device error ignored)
[12399.356328] ata1: EH complete
[12399.375203] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.381672] ata1.00: irq_stat 0x40000000
[12399.385625] ata1.00: failed command: READ DMA EXT
[12399.390366] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 14 dma 4096 in
[12399.405515] ata1.00: status: { DRDY SENSE ERR }
[12399.410073] ata1.00: error: { ABRT }
[12399.413947] ata1.00: configured for UDMA/133 (device error ignored)
[12399.420287] ata1: EH complete
[12399.443196] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.449687] ata1.00: irq_stat 0x40000000
[12399.453649] ata1.00: failed command: READ DMA EXT
[12399.458393] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 20 dma 4096 in
[12399.473547] ata1.00: status: { DRDY SENSE ERR }
[12399.478103] ata1.00: error: { ABRT }
[12399.481941] ata1.00: configured for UDMA/133 (device error ignored)
[12399.488307] ata1: EH complete
[12399.507198] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.513666] ata1.00: irq_stat 0x40000000
[12399.517645] ata1.00: failed command: READ DMA EXT
[12399.522392] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 26 dma 4096 in
[12399.537546] ata1.00: status: { DRDY SENSE ERR }
[12399.542098] ata1.00: error: { ABRT }
[12399.545940] ata1.00: configured for UDMA/133 (device error ignored)
[12399.552300] ata1: EH complete
[12399.579218] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.585687] ata1.00: irq_stat 0x40000000
[12399.589645] ata1.00: failed command: READ DMA EXT
[12399.594387] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 1 dma 4096 in
[12399.609452] ata1.00: status: { DRDY SENSE ERR }
[12399.614007] ata1.00: error: { ABRT }
[12399.617850] ata1.00: configured for UDMA/133 (device error ignored)
[12399.624212] ata1: EH complete
[12399.651195] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.657662] ata1.00: irq_stat 0x40000000
[12399.661616] ata1.00: failed command: READ DMA EXT
[12399.666355] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 7 dma 4096 in
[12399.681416] ata1.00: status: { DRDY SENSE ERR }
[12399.685974] ata1.00: error: { ABRT }
[12399.689815] ata1.00: configured for UDMA/133 (device error ignored)
[12399.739244] ata1: EH complete
')
So moonman, if you're out there, what do you think? Should I go ahead and install an earlier version of the kernel?
Thanks again for any help.
Les