HDD disappears from /dev/; all tests okay

This forum is for supported devices using an ARMv7 Freescale SoC.

Re: HDD disappears from /dev/; all tests okay

Postby Lestrad » Tue Jun 09, 2020 12:57 pm

I had posted a reply saying that the ATA problem had reappeared, and decided to check the SAATA cable connection. I had already replaced the SATA cable once, but the one I replaced it with was not new. I wiggled the connector into the Wandboard and sure enough I started getting the errors.

I have a new cable in order. Once it's connected I'll go back to watching for ATA errors and post here if they return yet again.

Thanks again for your help and patience.

Les
Lestrad
 
Posts: 41
Joined: Sun Oct 27, 2019 8:02 pm

Re: HDD disappears from /dev/; all tests okay

Postby Lestrad » Tue Jun 16, 2020 2:33 pm

Hello to all. Well, I just installed the new cable and it didn't take long for the HDD to disappear again, with similar or identical errors. lsblk at first showed no trace of it, but now, a half-hour or so later, it shows up as /dev/sdc, but with no partitions showing.

Below is the result of dmesg | grep ata.1:

$this->bbcode_second_pass_code('', '
[alarm@alarm ~]$ dmesg | grep ata1.
[ 3.597717] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 72
[ 4.078920] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.119795] ata1.00: ATA-10: ST6000DM003-2CY186, 0001, max UDMA/133
[ 4.126092] ata1.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32)
[ 4.184414] ata1.00: configured for UDMA/133
[ 17.346906] ata1.00: exception Emask 0x10 SAct 0x8000 SErr 0x10200 action 0xe frozen
[ 17.354689] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 17.360116] ata1: SError: { Persist PHYRdyChg }
[ 17.364677] ata1.00: failed command: READ FPDMA QUEUED
[ 17.369851] ata1.00: cmd 60/08:78:b0:d2:5a/00:00:00:00:00/40 tag 15 ncq dma 4096 in
[ 17.385519] ata1.00: status: { DRDY }
[ 17.389213] ata1: hard resetting link
[ 27.387213] ata1: softreset failed (1st FIS failed)
[ 27.392124] ata1: hard resetting link
[ 28.266889] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 28.353813] ata1.00: configured for UDMA/133
[ 28.398734] ata1: EH complete
[ 28.682891] ata1.00: exception Emask 0x10 SAct 0x80000001 SErr 0x10200 action 0xe frozen
[ 28.691019] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 28.696452] ata1: SError: { Persist PHYRdyChg }
[ 28.701014] ata1.00: failed command: READ FPDMA QUEUED
[ 28.706191] ata1.00: cmd 60/00:00:30:21:5f/01:00:00:00:00/40 tag 0 ncq dma 131072 in
[ 28.721950] ata1.00: status: { DRDY }
[ 28.725642] ata1.00: failed command: READ FPDMA QUEUED
[ 28.730819] ata1.00: cmd 60/00:f8:30:20:5f/01:00:00:00:00/40 tag 31 ncq dma 131072 in
[ 28.746662] ata1.00: status: { DRDY }
[ 28.750354] ata1: hard resetting link
[ 38.747754] ata1: softreset failed (1st FIS failed)
[ 38.752664] ata1: hard resetting link
[ 39.626890] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 39.713910] ata1.00: configured for UDMA/133
[ 39.799528] ata1: EH complete
[ 40.107004] ata1.00: exception Emask 0x10 SAct 0x18 SErr 0x10200 action 0xe frozen
[ 40.114636] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 40.120106] ata1: SError: { Persist PHYRdyChg }
[ 40.124677] ata1.00: failed command: READ FPDMA QUEUED
[ 40.129855] ata1.00: cmd 60/00:18:30:a7:5f/01:00:00:00:00/40 tag 3 ncq dma 131072 in
[ 40.145619] ata1.00: status: { DRDY }
[ 40.149310] ata1.00: failed command: READ FPDMA QUEUED
[ 40.154485] ata1.00: cmd 60/00:20:30:a8:5f/01:00:00:00:00/40 tag 4 ncq dma 131072 in
[ 40.170272] ata1.00: status: { DRDY }
[ 40.173973] ata1: hard resetting link
[ 50.171671] ata1: softreset failed (1st FIS failed)
[ 50.176585] ata1: hard resetting link
[ 51.050883] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 51.137766] ata1.00: configured for UDMA/133
[ 51.223190] ata1: EH complete
[ 51.426897] ata1: limiting SATA link speed to 1.5 Gbps
[ 51.432075] ata1.00: exception Emask 0x10 SAct 0x60 SErr 0x10200 action 0xe frozen
[ 51.439672] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 51.445101] ata1: SError: { Persist PHYRdyChg }
[ 51.449659] ata1.00: failed command: READ FPDMA QUEUED
[ 51.454834] ata1.00: cmd 60/00:28:30:da:5f/01:00:00:00:00/40 tag 5 ncq dma 131072 in
[ 51.470602] ata1.00: status: { DRDY }
[ 51.474290] ata1.00: failed command: READ FPDMA QUEUED
[ 51.479461] ata1.00: cmd 60/00:30:30:db:5f/01:00:00:00:00/40 tag 6 ncq dma 131072 in
[ 51.495213] ata1.00: status: { DRDY }
[ 51.498906] ata1: hard resetting link
[ 61.499474] ata1: softreset failed (1st FIS failed)
[ 61.504388] ata1: hard resetting link
[ 62.378883] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 62.465816] ata1.00: configured for UDMA/133
[ 62.551196] ata1: EH complete
[ 62.966901] ata1.00: exception Emask 0x10 SAct 0x30000000 SErr 0x10200 action 0xe frozen
[ 62.975054] ata1.00: irq_stat 0x00400000, PHY RDY changed
[ 62.980487] ata1: SError: { Persist PHYRdyChg }
[ 62.985085] ata1.00: failed command: READ FPDMA QUEUED
[ 62.990265] ata1.00: cmd 60/00:e0:30:a7:60/01:00:00:00:00/40 tag 28 ncq dma 131072 in
[ 63.006140] ata1.00: status: { DRDY }
[ 63.009833] ata1.00: failed command: READ FPDMA QUEUED
[ 63.015034] ata1.00: cmd 60/00:e8:30:a8:60/01:00:00:00:00/40 tag 29 ncq dma 131072 in
[ 63.030903] ata1.00: status: { DRDY }
[ 63.034576] ata1: hard resetting link
[ 73.030874] ata1: softreset failed (1st FIS failed)
[ 73.035781] ata1: hard resetting link
[ 73.910885] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 73.997884] ata1.00: configured for UDMA/133
[ 74.083935] ata1: EH complete
[12378.055864] ata1.00: exception Emask 0x10 SAct 0x10000 SErr 0x10200 action 0xe frozen
[12378.063751] ata1.00: irq_stat 0x00400000, PHY RDY changed
[12378.069237] ata1: SError: { Persist PHYRdyChg }
[12378.073809] ata1.00: failed command: READ FPDMA QUEUED
[12378.078979] ata1.00: cmd 60/08:80:98:1a:64/00:00:00:00:00/40 tag 16 ncq dma 4096 in
[12378.094645] ata1.00: status: { DRDY }
[12378.098335] ata1: hard resetting link
[12380.255790] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[12385.403666] ata1.00: qc timeout (cmd 0xec)
[12385.407806] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[12385.413931] ata1.00: revalidation failed (errno=-5)
[12385.418844] ata1: hard resetting link
[12385.899615] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[12390.861772] ata1.00: model number mismatch 'ST6000DM003-2CY186' != 'ST6000DM003'
[12390.869206] ata1.00: revalidation failed (errno=-19)
[12390.907457] ata1: hard resetting link
[12391.387454] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[12391.393768] ata1.00: model number mismatch 'ST6000DM003-2CY186' != 'ST6000DM003'
[12391.401197] ata1.00: revalidation failed (errno=-19)
[12391.406189] ata1.00: disabled
[12396.411314] ata1: hard resetting link
[12396.891286] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[12396.897656] ata1.00: failed to read native max address (err_mask=0x1)
[12396.904132] ata1.00: HPA support seems broken, skipping HPA handling
[12396.910525] ata1.00: ATA-8: ST6000DM003, 0001, max UDMA/133
[12396.916126] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32)
[12396.923048] ata1.00: configured for UDMA/133 (device error ignored)
[12396.970007] ata1: EH complete
[12396.973022] ata1.00: detaching (SCSI 0:0:0:0)
[12397.083622] ata1.00: device reported invalid CHS sector 0
[12397.127321] ata1.00: NCQ disabled due to excessive errors
[12397.133084] ata1.00: device reported invalid CHS sector 0
[12397.171709] ata1.00: device reported invalid CHS sector 0
[12397.231286] ata1.00: device reported invalid CHS sector 0
[12397.363316] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.369856] ata1.00: irq_stat 0x40000000
[12397.373814] ata1.00: failed command: READ DMA
[12397.378234] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 21 dma 4096 in
[12397.393414] ata1.00: status: { DRDY SENSE ERR }
[12397.397970] ata1.00: error: { ABRT }
[12397.401862] ata1.00: configured for UDMA/133 (device error ignored)
[12397.408244] ata1: EH complete
[12397.431264] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.437756] ata1.00: irq_stat 0x40000000
[12397.441716] ata1.00: failed command: READ DMA
[12397.446137] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 23 dma 4096 in
[12397.461316] ata1.00: status: { DRDY SENSE ERR }
[12397.465898] ata1.00: error: { ABRT }
[12397.469750] ata1.00: configured for UDMA/133 (device error ignored)
[12397.476127] ata1: EH complete
[12397.495255] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.501755] ata1.00: irq_stat 0x40000000
[12397.505710] ata1.00: failed command: READ DMA
[12397.510131] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 30 dma 4096 in
[12397.525306] ata1.00: status: { DRDY SENSE ERR }
[12397.529890] ata1.00: error: { ABRT }
[12397.533741] ata1.00: configured for UDMA/133 (device error ignored)
[12397.540117] ata1: EH complete
[12397.559257] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.565748] ata1.00: irq_stat 0x40000000
[12397.569701] ata1.00: failed command: READ DMA
[12397.574216] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 1 dma 4096 in
[12397.589304] ata1.00: status: { DRDY SENSE ERR }
[12397.593890] ata1.00: error: { ABRT }
[12397.597739] ata1.00: configured for UDMA/133 (device error ignored)
[12397.604114] ata1: EH complete
[12397.623254] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.629742] ata1.00: irq_stat 0x40000000
[12397.633701] ata1.00: failed command: READ DMA
[12397.638121] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 3 dma 4096 in
[12397.653211] ata1.00: status: { DRDY SENSE ERR }
[12397.657797] ata1.00: error: { ABRT }
[12397.661704] ata1.00: configured for UDMA/133 (device error ignored)
[12397.668075] ata1: EH complete
[12397.687254] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.693745] ata1.00: irq_stat 0x40000000
[12397.697702] ata1.00: failed command: READ DMA
[12397.702123] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 5 dma 4096 in
[12397.717214] ata1.00: status: { DRDY SENSE ERR }
[12397.721800] ata1.00: error: { ABRT }
[12397.725645] ata1.00: configured for UDMA/133 (device error ignored)
[12397.771576] ata1: EH complete
[12397.803263] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.809762] ata1.00: irq_stat 0x40000000
[12397.813716] ata1.00: failed command: READ DMA
[12397.818135] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 8 dma 4096 in
[12397.833227] ata1.00: status: { DRDY SENSE ERR }
[12397.837815] ata1.00: error: { ABRT }
[12397.841676] ata1.00: configured for UDMA/133 (device error ignored)
[12397.848054] ata1: EH complete
[12397.867251] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.873741] ata1.00: irq_stat 0x40000000
[12397.877699] ata1.00: failed command: READ DMA
[12397.882115] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 10 dma 4096 in
[12397.897289] ata1.00: status: { DRDY SENSE ERR }
[12397.901872] ata1.00: error: { ABRT }
[12397.905718] ata1.00: configured for UDMA/133 (device error ignored)
[12397.912085] ata1: EH complete
[12397.931242] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12397.937731] ata1.00: irq_stat 0x40000000
[12397.941688] ata1.00: failed command: READ DMA
[12397.946110] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 12 dma 4096 in
[12397.961286] ata1.00: status: { DRDY SENSE ERR }
[12397.965871] ata1.00: error: { ABRT }
[12397.969712] ata1.00: configured for UDMA/133 (device error ignored)
[12397.976079] ata1: EH complete
[12398.003243] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.009735] ata1.00: irq_stat 0x40000000
[12398.013695] ata1.00: failed command: READ DMA
[12398.018114] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 14 dma 4096 in
[12398.033290] ata1.00: status: { DRDY SENSE ERR }
[12398.037876] ata1.00: error: { ABRT }
[12398.041720] ata1.00: configured for UDMA/133 (device error ignored)
[12398.048089] ata1: EH complete
[12398.067238] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.073725] ata1.00: irq_stat 0x40000000
[12398.077681] ata1.00: failed command: READ DMA
[12398.082102] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 16 dma 4096 in
[12398.097279] ata1.00: status: { DRDY SENSE ERR }
[12398.101871] ata1.00: error: { ABRT }
[12398.105722] ata1.00: configured for UDMA/133 (device error ignored)
[12398.112096] ata1: EH complete
[12398.131239] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.137730] ata1.00: irq_stat 0x40000000
[12398.141687] ata1.00: failed command: READ DMA
[12398.146106] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 18 dma 4096 in
[12398.161283] ata1.00: status: { DRDY SENSE ERR }
[12398.165868] ata1.00: error: { ABRT }
[12398.169712] ata1.00: configured for UDMA/133 (device error ignored)
[12398.221599] ata1: EH complete
[12398.267240] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.273727] ata1.00: irq_stat 0x40000000
[12398.277688] ata1.00: failed command: READ DMA
[12398.282111] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 31 dma 4096 in
[12398.297283] ata1.00: status: { DRDY SENSE ERR }
[12398.301869] ata1.00: error: { ABRT }
[12398.305725] ata1.00: configured for UDMA/133 (device error ignored)
[12398.312100] ata1: EH complete
[12398.331240] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.337732] ata1.00: irq_stat 0x40000000
[12398.341684] ata1.00: failed command: READ DMA
[12398.346103] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 1 dma 4096 in
[12398.361193] ata1.00: status: { DRDY SENSE ERR }
[12398.365779] ata1.00: error: { ABRT }
[12398.369624] ata1.00: configured for UDMA/133 (device error ignored)
[12398.375992] ata1: EH complete
[12398.395234] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.401723] ata1.00: irq_stat 0x40000000
[12398.405679] ata1.00: failed command: READ DMA
[12398.410099] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 3 dma 4096 in
[12398.425187] ata1.00: status: { DRDY SENSE ERR }
[12398.429777] ata1.00: error: { ABRT }
[12398.433623] ata1.00: configured for UDMA/133 (device error ignored)
[12398.439991] ata1: EH complete
[12398.459226] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.465714] ata1.00: irq_stat 0x40000000
[12398.469668] ata1.00: failed command: READ DMA
[12398.474106] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 5 dma 4096 in
[12398.489172] ata1.00: status: { DRDY SENSE ERR }
[12398.493728] ata1.00: error: { ABRT }
[12398.497567] ata1.00: configured for UDMA/133 (device error ignored)
[12398.503916] ata1: EH complete
[12398.523228] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.529693] ata1.00: irq_stat 0x40000000
[12398.533646] ata1.00: failed command: READ DMA
[12398.538038] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 19 dma 4096 in
[12398.553186] ata1.00: status: { DRDY SENSE ERR }
[12398.557743] ata1.00: error: { ABRT }
[12398.561583] ata1.00: configured for UDMA/133 (device error ignored)
[12398.567920] ata1: EH complete
[12398.583225] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.589692] ata1.00: irq_stat 0x40000000
[12398.593644] ata1.00: failed command: READ DMA
[12398.598036] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 21 dma 4096 in
[12398.613186] ata1.00: status: { DRDY SENSE ERR }
[12398.617743] ata1.00: error: { ABRT }
[12398.621578] ata1.00: configured for UDMA/133 (device error ignored)
[12398.667519] ata1: EH complete
[12398.703224] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.709692] ata1.00: irq_stat 0x40000000
[12398.713642] ata1.00: failed command: READ DMA
[12398.718040] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 22 dma 4096 in
[12398.733187] ata1.00: status: { DRDY SENSE ERR }
[12398.737742] ata1.00: error: { ABRT }
[12398.741586] ata1.00: configured for UDMA/133 (device error ignored)
[12398.747962] ata1: EH complete
[12398.767222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.773690] ata1.00: irq_stat 0x40000000
[12398.777642] ata1.00: failed command: READ DMA
[12398.782036] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 24 dma 4096 in
[12398.797184] ata1.00: status: { DRDY SENSE ERR }
[12398.801739] ata1.00: error: { ABRT }
[12398.805573] ata1.00: configured for UDMA/133 (device error ignored)
[12398.811912] ata1: EH complete
[12398.831218] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.837692] ata1.00: irq_stat 0x40000000
[12398.841645] ata1.00: failed command: READ DMA
[12398.846040] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 26 dma 4096 in
[12398.861191] ata1.00: status: { DRDY SENSE ERR }
[12398.865746] ata1.00: error: { ABRT }
[12398.869585] ata1.00: configured for UDMA/133 (device error ignored)
[12398.875921] ata1: EH complete
[12398.895223] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.901693] ata1.00: irq_stat 0x40000000
[12398.905647] ata1.00: failed command: READ DMA
[12398.910039] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 28 dma 4096 in
[12398.925185] ata1.00: status: { DRDY SENSE ERR }
[12398.929741] ata1.00: error: { ABRT }
[12398.933576] ata1.00: configured for UDMA/133 (device error ignored)
[12398.939912] ata1: EH complete
[12398.955214] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12398.961681] ata1.00: irq_stat 0x40000000
[12398.965635] ata1.00: failed command: READ DMA
[12398.970025] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 30 dma 4096 in
[12398.985173] ata1.00: status: { DRDY SENSE ERR }
[12398.989729] ata1.00: error: { ABRT }
[12398.993557] ata1.00: configured for UDMA/133 (device error ignored)
[12398.999892] ata1: EH complete
[12399.015212] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.021678] ata1.00: irq_stat 0x40000000
[12399.025630] ata1.00: failed command: READ DMA
[12399.030023] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in
[12399.045087] ata1.00: status: { DRDY SENSE ERR }
[12399.049646] ata1.00: error: { ABRT }
[12399.053487] ata1.00: configured for UDMA/133 (device error ignored)
[12399.099095] ata1: EH complete
[12399.187233] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.193739] ata1.00: irq_stat 0x40000000
[12399.198445] ata1.00: failed command: READ DMA EXT
[12399.203245] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 8 dma 4096 in
[12399.218338] ata1.00: status: { DRDY SENSE ERR }
[12399.222924] ata1.00: error: { ABRT }
[12399.226827] ata1.00: configured for UDMA/133 (device error ignored)
[12399.273854] ata1: EH complete
[12399.311203] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.317678] ata1.00: irq_stat 0x40000000
[12399.321659] ata1.00: failed command: READ DMA EXT
[12399.326409] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 13 dma 4096 in
[12399.341561] ata1.00: status: { DRDY SENSE ERR }
[12399.346115] ata1.00: error: { ABRT }
[12399.349981] ata1.00: configured for UDMA/133 (device error ignored)
[12399.356328] ata1: EH complete
[12399.375203] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.381672] ata1.00: irq_stat 0x40000000
[12399.385625] ata1.00: failed command: READ DMA EXT
[12399.390366] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 14 dma 4096 in
[12399.405515] ata1.00: status: { DRDY SENSE ERR }
[12399.410073] ata1.00: error: { ABRT }
[12399.413947] ata1.00: configured for UDMA/133 (device error ignored)
[12399.420287] ata1: EH complete
[12399.443196] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.449687] ata1.00: irq_stat 0x40000000
[12399.453649] ata1.00: failed command: READ DMA EXT
[12399.458393] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 20 dma 4096 in
[12399.473547] ata1.00: status: { DRDY SENSE ERR }
[12399.478103] ata1.00: error: { ABRT }
[12399.481941] ata1.00: configured for UDMA/133 (device error ignored)
[12399.488307] ata1: EH complete
[12399.507198] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.513666] ata1.00: irq_stat 0x40000000
[12399.517645] ata1.00: failed command: READ DMA EXT
[12399.522392] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 26 dma 4096 in
[12399.537546] ata1.00: status: { DRDY SENSE ERR }
[12399.542098] ata1.00: error: { ABRT }
[12399.545940] ata1.00: configured for UDMA/133 (device error ignored)
[12399.552300] ata1: EH complete
[12399.579218] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.585687] ata1.00: irq_stat 0x40000000
[12399.589645] ata1.00: failed command: READ DMA EXT
[12399.594387] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 1 dma 4096 in
[12399.609452] ata1.00: status: { DRDY SENSE ERR }
[12399.614007] ata1.00: error: { ABRT }
[12399.617850] ata1.00: configured for UDMA/133 (device error ignored)
[12399.624212] ata1: EH complete
[12399.651195] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[12399.657662] ata1.00: irq_stat 0x40000000
[12399.661616] ata1.00: failed command: READ DMA EXT
[12399.666355] ata1.00: cmd 25/00:08:00:f4:a0/00:00:ba:02:00/e0 tag 7 dma 4096 in
[12399.681416] ata1.00: status: { DRDY SENSE ERR }
[12399.685974] ata1.00: error: { ABRT }
[12399.689815] ata1.00: configured for UDMA/133 (device error ignored)
[12399.739244] ata1: EH complete
')

So moonman, if you're out there, what do you think? Should I go ahead and install an earlier version of the kernel?

Thanks again for any help.
Les
Lestrad
 
Posts: 41
Joined: Sun Oct 27, 2019 8:02 pm

Re: HDD disappears from /dev/; new HDD causes eth errors

Postby Lestrad » Fri Jun 19, 2020 3:14 pm

Seagate sent me a new drive and I set it up exactly like the one that was getting lost. I started a copy of a very large directory to it from Windows using BeyondCompare 3 and it worked fine for an hour and a half, then suddenly disconnected from the network.

This time, however, I'm not getting any ATA errors and the drive is still visible, mounted, and accessible via the serial connection. Instead I got the errors below. If anyone has any ideas please let me know.

TIA
Les

$this->bbcode_second_pass_code('', ' [alarm@alarm mnt]$ [277026.636835] fec 2188000.ethernet eth0: MDIO read timeout
[277026.642292] ------------[ cut here ]------------
[277026.647063] WARNING: CPU: 2 PID: 4328 at drivers/net/phy/phy.c:682 phy_error +0x24/0x5c
[277026.655102] Modules linked in: cifs fscache libarc4 fuse caam_jr caamhash_de sc caamalg_desc rng_core authenc dw_hdmi_cec dw_hdmi_ahb_audio imx6_media_csi(C) brcmfmac brcmutil cfg80211 rfkill snd_soc_imx_sgtl5000 snd_soc_fsl_asoc_card sn d_ac97_codec snd_soc_imx_spdif snd_soc_sgtl5000 imx6_mipi_csi2(C) snd_soc_imx_au dmux video_mux mux_core caam error snd_soc_fsl_asrc snd_soc_fsl_spdif snd_soc_fs l_ssi imx_pcm_fiq imx_pcm_dma snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm sn d_timer imx2_wdt coda_vpu imx_vdoa videobuf2_vmalloc imx6_media(C) imx_media_com mon(C) videobuf2_dma_contig v4l2_mem2mem etnaviv v4l2_fwnode videobuf2_memops vi deobuf2_v4l2 dw_hdmi_imx dw_hdmi imxdrm videobuf2_common gpu_sched imx_ipu_v3 ui o_pdrv_genirq uio sch_fq_codel ip_tables x_tables
[277026.722649] CPU: 2 PID: 4328 Comm: kworker/2:1 Tainted: G C 5 .6.15-1-ARCH #1
[277026.731094] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[277026.737723] Workqueue: events_power_efficient phy_state_machine
[277026.743755] [<c031131c>] (unwind_backtrace) from [<c030bf00>] (show_stack+0x 10/0x14)
[277026.751598] [<c030bf00>] (show_stack) from [<c0fe3f1c>] (dump_stack+0xb0/0xc 4)
[277026.758922] [<c0fe3f1c>] (dump_stack) from [<c0345d50>] (__warn+0xbc/0xd8)
[277026.765892] [<c0345d50>] (__warn) from [<c0345dd0>] (warn_slowpath_fmt+0x64/ 0xc4)
[277026.773469] [<c0345dd0>] (warn_slowpath_fmt) from [<c0c1aee8>] (phy_error+0x 24/0x5c)
[277026.781306] [<c0c1aee8>] (phy_error) from [<c0c1c110>] (phy_state_machine+0x c8/0x154)
[277026.789232] [<c0c1c110>] (phy_state_machine) from [<c035ff38>] (process_one_ work+0x1c8/0x420)
[277026.797849] [<c035ff38>] (process_one_work) from [<c03601dc>] (worker_thread +0x4c/0x528)
[277026.806036] [<c03601dc>] (worker_thread) from [<c03666ac>] (kthread+0x124/0x 150)
[277026.813528] [<c03666ac>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2 c)
[277026.820839] Exception stack(0xe791dfb0 to 0xe791dff8)
[277026.825982] dfa0: 00000000 00000000 0000 0000 00000000
[277026.834251] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 0000 0000 00000000
[277026.842519] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[277026.849268] ---[ end trace dc3fa8c820913fd5 ]---
[277026.854139] fec 2188000.ethernet eth0: Link is Down')
Lestrad
 
Posts: 41
Joined: Sun Oct 27, 2019 8:02 pm

Re: HDD disappears from /dev/; all tests okay

Postby Lestrad » Fri Jul 03, 2020 5:38 pm

Update: The HDD problem seems to have disappeared. But the error I was getting with the new drive continues. I'll start a new thread with the new problem, which seems to be related more to the SD card than to the hard disk drive.

Thanks to all who have read and contributed.

Les
Lestrad
 
Posts: 41
Joined: Sun Oct 27, 2019 8:02 pm

Previous

Return to Freescale

Who is online

Users browsing this forum: No registered users and 4 guests