Arch Arm build doesn't become gadget on USB Armory mk2

This forum is for supported devices using an ARMv7 Freescale SoC.

Arch Arm build doesn't become gadget on USB Armory mk2

Postby Borealid » Thu Apr 07, 2022 1:41 pm

I have a USB Armory mk2, which is one of the build targets for Arch Linux ARM: https://archlinuxarm.org/platforms/armv ... mory-mk-ii .

However, with the latest release (March 15, 2022) the device will power up and show a hearbeat LED, but the host computer it's connected to sees no USB device attach events. Inspecting the on-device filesystem shows no log messages written to the disk.

I have no special hardware available to debug the boot process and determine where the problem lies, but the out-of-the-box experience is entirely broken for this target presently. Is there someone who has one of these and can determine what the issue is? If the gadget drivers aren't there this board has no interactive I/O capability :( .

Debian boots fine on the same hardware so I know it's not a hardware issue or a problem with my image-flashing method.
Borealid
 
Posts: 1
Joined: Thu Apr 07, 2022 1:34 pm

Return to Freescale

Who is online

Users browsing this forum: No registered users and 3 guests