Latest download not working on Cubox i4 Pro

[moonman]

The thread you pointed to is 6 years old. Syslog is not the default anymore and it is stored in binary format now. The easiest way is serial and you only need a microusb cable (which comes with almost any modern smartphone nowadays)

[qong]

So, /var/log is empty and here's the output from the serial
$this->bbcode_second_pass_code('', '
U-Boot SPL 2013.10-rc4-ga06fada (Sep 11 2014 - 08:20:12)
Boot Device: SD1


U-Boot 2013.10-rc4-ga06fada (Sep 11 2014 - 08:20:12)

CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: MX6-CuBox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In: serial
Out: vga
Err: vga
Net: FEC [PRIME]
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
Hit any key to stop autoboot: 0
mmc0 is current device
** Unable to read file /boot.scr **
211 bytes read in 8 ms (25.4 KiB/s)
Importing environment from mmc0 ...
6256520 bytes read in 351 ms (17 MiB/s)
Booting from mmc ...
33835 bytes read in 15 ms (2.2 MiB/s)
Loaded imx6q-cubox-i.dtb
Booting zImage
Kernel image @ 0x10800000 [ 0x000000 - 0x5f7788 ]
## Flattened Device Tree blob at 18000000
Booting using the fdt blob at 0x18000000
Using Device Tree in place at 18000000, end 1800b42a

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.25-2-ARCH (nobody@root-chroot-copy) (gcc version 4.9.2 (GCC) ) #1 SMP Mon Dec 1 07:35:18 MST 2014
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: SolidRun Cubox-i Dual/Quad
[ 0.000000] cma: CMA: reserved 256 MiB at 6e000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 8 pages/cpu @ee743000 s9728 r8192 d14848 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520720
[ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait rw console=tty1 console=ttymxc0,115200 consoleblank=0 video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24,bpp=16 dmfc=3 ahci_imx.hotplug=1 pci=nomsi loop.max_part=15
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1800568K/2097152K available (7667K kernel code, 363K rwdata, 2696K rodata, 345K init, 529K bss, 296584K reserved, 270336K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0x80000000 - 0xef800000 (1784 MB)
[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80008000 - 0x80a26e7c (10364 kB)
[ 0.000000] .init : 0x80a27000 - 0x80a7d600 ( 346 kB)
[ 0.000000] .data : 0x80a7e000 - 0x80ad8f40 ( 364 kB)
[ 0.000000] .bss : 0x80ad8f48 - 0x80b5d388 ( 530 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 4 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001
[ 0.000010] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
[ 0.000588] Console: colour dummy device 80x30
[ 0.000979] console [tty1] enabled
[ 0.001012] Calibrating delay loop... 1570.81 BogoMIPS (lpj=785408)
[ 0.015328] pid_max: default: 32768 minimum: 301
[ 0.015460] Security Framework initialized
[ 0.015478] SELinux: Initializing.
[ 0.015571] Mount-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.015589] Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.020843] Initializing cgroup subsys memory
[ 0.020874] Initializing cgroup subsys devices
[ 0.020891] Initializing cgroup subsys freezer
[ 0.020906] Initializing cgroup subsys net_cls
[ 0.020920] Initializing cgroup subsys blkio
[ 0.020934] Initializing cgroup subsys bfqio
[ 0.020947] Initializing cgroup subsys perf_event
[ 0.021019] CPU: Testing write buffer coherency: ok
[ 0.021300] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.021384] Setting up static identity map for 0x10749788 - 0x107497e0
[ 0.023089] CPU1: Booted secondary processor
[ 0.029314] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.030170] CPU2: Booted secondary processor
[ 0.036315] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.037185] CPU3: Booted secondary processor
[ 0.043315] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.043427] Brought up 4 CPUs
[ 0.043497] SMP: Total of 4 processors activated.
[ 0.043510] CPU: All CPU(s) started in SVC mode.
[ 0.044141] devtmpfs: initialized
[ 0.047759] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.060583] atomic64 test passed
[ 0.060619] pinctrl core: initialized pinctrl subsystem
[ 0.061018] regulator-dummy: no parameters
[ 0.061379] NET: Registered protocol family 16
[ 0.069193] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.069733] cpuidle: using governor ladder
[ 0.069752] cpuidle: using governor menu
[ 0.069979] CPU identified as i.MX6Q, silicon rev 1.2
[ 0.070085] Use WDOG1 as reset source
[ 0.077680] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
[ 0.077958] vdd1p1: 800 <--> 1375 mV at 1125 mV
[ 0.078297] vdd3p0: 2800 <--> 3150 mV at 3000 mV
[ 0.078616] vdd2p5: 2000 <--> 2750 mV at 2425 mV
[ 0.080341] vddarm: 725 <--> 1450 mV at 1150 mV
[ 0.080662] vddpu: 725 <--> 1450 mV at 1150 mV
[ 0.081334] vddsoc: 725 <--> 1450 mV at 1200 mV
[ 0.083049] syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
[ 0.085291] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
[ 0.088900] No ATAGs?
[ 0.088932] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.088958] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.089355] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.103254] bio: create slab <bio-0> at 0
[ 0.105403] mxs-dma 110000.dma-apbh: initialized
[ 0.106069] brcm_osc_reg: 3300 mV
[ 0.106362] brcm_reg: 3300 mV
[ 0.106571] 3P3V: 3300 mV
[ 0.106850] usb_h1_vbus: 5000 mV
[ 0.107098] usb_otg_vbus: 5000 mV
[ 0.107400] vgaarb: loaded
[ 0.108095] SCSI subsystem initialized
[ 0.108568] usbcore: registered new interface driver usbfs
[ 0.108650] usbcore: registered new interface driver hub
[ 0.108760] usbcore: registered new device driver usb
[ 0.108899] usbphy_nop1.12 supply vcc not found, using dummy regulator
[ 0.109000] usbphy_nop2.13 supply vcc not found, using dummy regulator
[ 0.110246] i2c i2c-1: IMX I2C adapter registered
[ 0.110801] i2c i2c-2: IMX I2C adapter registered
[ 0.110914] media: Linux media interface: v0.10
[ 0.110976] Linux video capture interface: v2.00
[ 0.111055] pps_core: LinuxPPS API ver. 1 registered
[ 0.111070] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.111104] PTP clock support registered
[ 0.113386] imx-ipuv3 2400000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)
[ 0.116377] imx-ipuv3 2800000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)
[ 0.117138] MIPI CSI2 driver module loaded
[ 0.117227] Advanced Linux Sound Architecture Driver Initialized.
[ 0.118038] NetLabel: Initializing
[ 0.118055] NetLabel: domain hash size = 128
[ 0.118067] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.118128] NetLabel: unlabeled traffic allowed by default
[ 0.118440] Switched to clocksource mxc_timer1
[ 0.128927] NET: Registered protocol family 2
[ 0.129794] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.129951] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.130200] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.130281] TCP: reno registered
[ 0.130304] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.130392] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.130760] NET: Registered protocol family 1
[ 0.131119] RPC: Registered named UNIX socket transport module.
[ 0.131139] RPC: Registered udp transport module.
[ 0.131151] RPC: Registered tcp transport module.
[ 0.131163] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.131790] hw perfevents: enabled with ARMv7_Cortex_A9 PMU driver, 7 counters available
[ 0.133277] pureg-dummy: no parameters
[ 0.134282] imx6_busfreq busfreq.15: DDR medium rate not supported.
[ 0.134895] Bus freq driver module loaded
[ 0.135832] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.136058] audit: initializing netlink subsys (disabled)
[ 0.136105] audit: type=2000 audit(0.135:1): initialized
[ 0.303969] bounce pool size: 64 pages
[ 0.309621] zbud: loaded
[ 0.310145] VFS: Disk quotas dquot_6.5.2
[ 0.310387] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.312506] NFS: Registering the id_resolver key type
[ 0.312567] Key type id_resolver registered
[ 0.312581] Key type id_legacy registered
[ 0.312605] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.312832] fuse init (API version 7.22)
[ 0.314077] aufs 3.14.21+-20141110
[ 0.314108] msgmni has been set to 3500
[ 0.314381] Key type big_key registered
[ 0.327020] alg: No test for crc32 (crc32-table)
[ 0.327448] alg: No test for stdrng (krng)
[ 0.348756] NET: Registered protocol family 38
[ 0.348846] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.348969] io scheduler noop registered
[ 0.348988] io scheduler deadline registered
[ 0.349174] io scheduler cfq registered
[ 0.349312] io scheduler bfq registered (default)
[ 0.349326] BFQ I/O-scheduler version: v7r6
[ 0.351785] mxc_sdc_fb fb.28: register mxc display driver hdmi
[ 0.351971] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[ 0.352007] fbcvt: 1280x720@60: CVT Name - .921M9
[ 0.413399] Console: switching to colour frame buffer device 160x45
[ 0.449508] imx-sdma 20ec000.sdma: no iram assigned, using external mem
[ 0.450101] imx-sdma 20ec000.sdma: loaded firmware 1.1
[ 0.452480] imx-sdma 20ec000.sdma: initialized
[ 0.452937] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.454213] Serial: IMX driver
[ 0.454567] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX
[ 1.375195] console [ttymxc0] enabled
[ 1.379669] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61, base_baud = 5000000) is a IMX
[ 1.388762] serial: Freescale lpuart driver
[ 1.394248] [drm] Initialized drm 1.1.0 20060810
[ 1.401741] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[ 1.417062] brd: module loaded
[ 1.422762] loop: module loaded
[ 1.429174] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044
[ 1.439408] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000
[ 1.449452] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000
[ 1.459632] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
[ 1.472564] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 1.478449] mxc_hdmi 20e0000.hdmi_video: mxc_hdmi_read_edid HDMI in HDMI mode
[ 1.491713] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 1.491729] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[ 1.493672] scsi0 : ahci_platform
[ 1.493947] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
[ 1.494746] libphy: Fixed MDIO Bus: probed
[ 1.495431] 2188000.ethernet supply phy not found, using dummy regulator
[ 1.550616] libphy: fec_enet_mii_bus: probed
[ 1.551096] fec 2188000.ethernet eth0: registered PHC device 0
[ 1.551268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.551272] ehci-pci: EHCI PCI platform driver
[ 1.551336] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.551355] ohci-pci: OHCI PCI platform driver
[ 1.551401] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.551631] usbcore: registered new interface driver usb-storage
[ 1.551668] usbcore: registered new interface driver ums-usbat
[ 1.551781] usbcore: registered new interface driver usbserial
[ 1.551818] usbcore: registered new interface driver usbserial_generic
[ 1.551853] usbserial: USB Serial support registered for generic
[ 1.552406] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
[ 1.556675] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 1.556693] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 1.563479] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 1.563675] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.563685] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.563691] usb usb1: Product: EHCI Host Controller
[ 1.563697] usb usb1: Manufacturer: Linux 3.14.25-2-ARCH ehci_hcd
[ 1.563701] usb usb1: SerialNumber: ci_hdrc.0
[ 1.564327] hub 1-0:1.0: USB hub found
[ 1.564366] hub 1-0:1.0: 1 port detected
[ 1.568115] ci_hdrc ci_hdrc.1: doesn't support gadget
[ 1.568126] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 1.568152] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 1.573454] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 1.573597] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.573606] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.573611] usb usb2: Product: EHCI Host Controller
[ 1.573616] usb usb2: Manufacturer: Linux 3.14.25-2-ARCH ehci_hcd
[ 1.573620] usb usb2: SerialNumber: ci_hdrc.1
[ 1.574185] hub 2-0:1.0: USB hub found
[ 1.574216] hub 2-0:1.0: 1 port detected
[ 1.575005] mousedev: PS/2 mouse device common for all mice
[ 1.575706] rtc-pcf8523: probe of 2-0068 failed with error -5
[ 1.576221] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
[ 1.576315] i2c /dev entries driver
[ 1.578026] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
[ 1.578421] device-mapper: uevent: version 1.0.3
[ 1.578737] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.579226] sdhci: Secure Digital Host Controller Interface driver
[ 1.579229] sdhci: Copyright(c) Pierre Ossman
[ 1.579231] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.579988] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
[ 1.581134] mmc0: no vqmmc regulator found
[ 1.810471] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.852474] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
[ 1.855888] mmc1: no vqmmc regulator found
[ 1.856185] 2194000.usdhc supply card-external-vcc not found, using dummy regulator
[ 1.866509] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 1.924465] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[ 2.138684] usb 1-1: New USB device found, idVendor=2659, idProduct=1210
[ 2.138693] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.138700] usb 1-1: Product: MediaTV Pro III (EU)
[ 2.138705] usb 1-1: Manufacturer: Sundtek
[ 2.138710] usb 1-1: SerialNumber: U140507164226
[ 2.262681] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.264410] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.266133] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.270208] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.273296] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.351557] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[ 2.441405] mmc0: new high speed SDIO card at address 0001
[ 2.455488] Galcore version 4.6.9.9754
[ 2.467023] usb 2-1: New USB device found, idVendor=0409, idProduct=005a
[ 2.474098] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.482020] hub 2-1:1.0: USB hub found
[ 2.485987] hub 2-1:1.0: 4 ports detected
[ 2.494190] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[ 2.502562] mxc_asrc 2034000.asrc: mxc_asrc registered
[ 2.507482] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 2.513850] mmc1: new high speed SDHC card at address 0007
[ 2.514254] mmcblk0: mmc1:0007 SD04G 3.70 GiB
[ 2.515936] mmcblk0: p1 p2
[ 2.538513] mxc_vpu 2040000.vpu: VPU initialized
[ 2.546763] mxc_hdmi_cec hdmi_cec.17: HDMI CEC initialized
[ 2.555859] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.564383] usbcore: registered new interface driver usbhid
[ 2.572931] usbhid: USB HID core driver
[ 2.595018] imx-spdif sound-spdif.26: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
[ 2.624458] imx-audio-hdmi sound-hdmi.27: hdmi-hifi <-> hdmi_audio.16 mapping ok
[ 2.636626] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.644979] TCP: cubic registered
[ 2.651262] Initializing XFRM netlink socket
[ 2.659056] NET: Registered protocol family 10
[ 2.667285] mip6: Mobile IPv6
[ 2.673170] NET: Registered protocol family 17
[ 2.680553] 8021q: 802.1Q VLAN Support v1.8
[ 2.687647] Key type dns_resolver registered
[ 2.696655] registered taskstats version 1
[ 2.703722] regulator-dummy: disabling
[ 2.710654] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1)
[ 2.732162] ALSA device list:
[ 2.737949] #0: imx-spdif
[ 2.743475] #1: imx-hdmi-soc
[ 2.752158] md: Waiting for all devices to be available before autodetect
[ 2.761109] md: If you don't use raid, use raid=noautodetect
[ 2.764745] usb 2-1.3: new full-speed USB device number 3 using ci_hdrc
[ 2.778354] md: Autodetecting RAID arrays.
[ 2.784660] md: Scanned 0 and added 0 devices.
[ 2.791294] md: autorun ...
[ 2.796241] md: ... autorun DONE.
[ 2.816788] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2.829106] VFS: Mounted root (vfat filesystem) on device 179:1.
[ 2.837543] devtmpfs: error mounting -2
[ 2.844100] Freeing unused kernel memory: 344K (80a27000 - 80a7d000)
[ 2.853027] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 2.858115] usb 2-1.3: New USB device found, idVendor=1784, idProduct=0001
[ 2.858122] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.858128] usb 2-1.3: Product: eHome Infrared Transceiver
[ 2.858132] usb 2-1.3: Manufacturer: Topseed
[ 2.858136] usb 2-1.3: SerialNumber: TS0017Mc
[ 2.909596] CPU0: stopping
[ 2.914763] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.25-2-ARCH #1
[ 2.923896] [<80015438>] (unwind_backtrace) from [<800116fc>] (show_stack+0x10/0x14)
[ 2.934154] [<800116fc>] (show_stack) from [<80740968>] (dump_stack+0x88/0x98)
[ 2.943873] [<80740968>] (dump_stack) from [<80013f24>] (handle_IPI+0x14c/0x16c)
[ 2.953754] [<80013f24>] (handle_IPI) from [<8000850c>] (gic_handle_irq+0x58/0x5c)
[ 2.963831] [<8000850c>] (gic_handle_irq) from [<80745d40>] (__irq_svc+0x40/0x50)
[ 2.973829] Exception stack(0x80a7ff18 to 0x80a7ff60)
[ 2.981402] ff00: 80a7ff60 3b9aca00
[ 2.992139] ff20: ad6651e0 00000000 80a8d644 80a8d5f8 ee7442a8 00000001 ad640fc0 00000000
[ 3.002903] ff40: 80a7e000 00000000 00000017 80a7ff60 00000009 80516720 00000113 ffffffff
[ 3.013689] [<80745d40>] (__irq_svc) from [<80516720>] (cpuidle_enter_state+0x54/0xe4)
[ 3.024218] [<80516720>] (cpuidle_enter_state) from [<805168ac>] (cpuidle_idle_call+0xfc/0x14c)
[ 3.035546] [<805168ac>] (cpuidle_idle_call) from [<8000ef28>] (arch_cpu_idle+0x10/0x54)
[ 3.046264] [<8000ef28>] (arch_cpu_idle) from [<8006d084>] (cpu_startup_entry+0x100/0x144)
[ 3.057173] [<8006d084>] (cpu_startup_entry) from [<80a27b40>] (start_kernel+0x380/0x38c)
[ 3.068009] CPU1: stopping
[ 3.073375] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.25-2-ARCH #1
[ 3.082708] [<80015438>] (unwind_backtrace) from [<800116fc>] (show_stack+0x10/0x14)
[ 3.093219] [<800116fc>] (show_stack) from [<80740968>] (dump_stack+0x88/0x98)
[ 3.103217] [<80740968>] (dump_stack) from [<80013f24>] (handle_IPI+0x14c/0x16c)
[ 3.113399] [<80013f24>] (handle_IPI) from [<8000850c>] (gic_handle_irq+0x58/0x5c)
[ 3.123774] [<8000850c>] (gic_handle_irq) from [<80745d40>] (__irq_svc+0x40/0x50)
[ 3.134084] Exception stack(0xdc0c7f50 to 0xdc0c7f98)
[ 3.141921] 7f40: dc0c7f98 3b9aca00 ad66532d 00000000
[ 3.152919] 7f60: 80a8d644 80a8d5f8 ee74c2a8 00000001 aa69d972 00000000 dc0c6000 00000000
[ 3.163950] 7f80: 00000017 dc0c7f98 00000009 80516720 00000113 ffffffff
[ 3.173473] [<80745d40>] (__irq_svc) from [<80516720>] (cpuidle_enter_state+0x54/0xe4)
[ 3.184319] [<80516720>] (cpuidle_enter_state) from [<805168ac>] (cpuidle_idle_call+0xfc/0x14c)
[ 3.195978] [<805168ac>] (cpuidle_idle_call) from [<8000ef28>] (arch_cpu_idle+0x10/0x54)
[ 3.207024] [<8000ef28>] (arch_cpu_idle) from [<8006d084>] (cpu_startup_entry+0x100/0x144)
[ 3.218247] [<8006d084>] (cpu_startup_entry) from [<100085a4>] (0x100085a4)
[ 3.228192] CPU3: stopping
[ 3.233875] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.14.25-2-ARCH #1
[ 3.243545] [<80015438>] (unwind_backtrace) from [<800116fc>] (show_stack+0x10/0x14)
[ 3.254335] [<800116fc>] (show_stack) from [<80740968>] (dump_stack+0x88/0x98)
[ 3.264563] [<80740968>] (dump_stack) from [<80013f24>] (handle_IPI+0x14c/0x16c)
[ 3.274945] [<80013f24>] (handle_IPI) from [<8000850c>] (gic_handle_irq+0x58/0x5c)
[ 3.285503] [<8000850c>] (gic_handle_irq) from [<80745d40>] (__irq_svc+0x40/0x50)
[ 3.295895] Exception stack(0xdc0cbf50 to 0xdc0cbf98)
[ 3.303786] bf40: dc0cbf98 3b9aca00 ad6651e0 00000000
[ 3.314870] bf60: 80a8d644 80a8d5f8 ee75c2a8 00000001 aa69d43d 00000000 dc0ca000 00000000
[ 3.325956] bf80: 00000017 dc0cbf98 00000009 80516720 00000113 ffffffff
[ 3.335513] [<80745d40>] (__irq_svc) from [<80516720>] (cpuidle_enter_state+0x54/0xe4)
[ 3.346432] [<80516720>] (cpuidle_enter_state) from [<805168ac>] (cpuidle_idle_call+0xfc/0x14c)
[ 3.358183] [<805168ac>] (cpuidle_idle_call) from [<8000ef28>] (arch_cpu_idle+0x10/0x54)
[ 3.369325] [<8000ef28>] (arch_cpu_idle) from [<8006d084>] (cpu_startup_entry+0x100/0x144)
[ 3.380635] [<8006d084>] (cpu_startup_entry) from [<100085a4>] (0x100085a4)
')

[pepedog]

This is worrying
$this->bbcode_second_pass_code('', '[ 2.816788] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.')
The whole system should be on a single ext4 partition, not fat.
Following the official instructions it should be ext4 http://archlinuxarm.org/platforms/armv7/freescale/cubox-i#qt-platform_tabs-ui-tabs2
Will have to look at their ignition thing

Edit
Their scripts look OK
https://github.com/SolidRun/ignition-imx6/blob/master/ArchLinux/install.sh
Think you will have to look at our official install

[qong]

Yes, the solid-run script creates 2 partitions. 1 FAT & 1 EXT.4.

However, the "official" way at http://archlinuxarm.org/platforms/armv7/freescale/cubox-i#qt-platform_tabs-ui-tabs2 creates an SD card where the cubox doesn't even start. No Red Light.

[qong]

I tried it again.

But instead of using
$this->bbcode_second_pass_code('', 'bsdtar -xpf ArchLinuxARM-imx6-cubox-latest.tar.gz -C root')

I did the following

$this->bbcode_second_pass_code('', '
cd root
tar -zxvf ../ArchLinuxARM-imx6-cubox-latest.tar.gz
cd ..
')

On the debian system that I use, there's no bsdtar installed. And I never knew it existed before.

and now it works.

Thanks for your patience and assistance.

[pepedog]

Apart from that ignition script, which appears to create one ext4 partition the same as official, I don't know anything about it,
If the official instructions fail you must be missing something, maybe at the dd steps?
You can interact with uboot, interrupt and do
env default -a
saveenv
reset

[devr]

I was doing an arch re-install on one of my cubox i4 pro today. Following the latest install instructions @ http://archlinuxarm.org/platforms/armv7 ... le/cubox-i, gets me an unbo0table device. Only the optical audio light on, no output from HDMI, no output via serial console. Maybe I should of done an update before wiping/re-installing. Not sure, it has been a while since I did an install.

I remember the last time I did an install there were 2 partitions created, one boot & the other root. Maybe that has changed since I last did an install ? I am going to try to old instructions next, found @ http://web.archive.org/web/201407240448 ... le/cubox-i. Will let you know what I find/figure out.

Edit: spelling

[pepedog]

Yes, now it is a single ext4 partition.
Check in uEnv.txt where the rootfs is to make it bottable

[devr]

I think I see where I went wrong(in process od re-doing the install). I should have my copy-&-paste privileges revoked for the day. Also, may of run into a bad SD card that I need to replace.