I bought a Cubix-i4Pro, a 32Gb SD Card (10), and a eSata Dock with a 2TB WD disk, and after a lot of research, did this setup to work. So I have the SD Card with the "/Boot" files and the eSata disk to root file system. Oh! and the Arch Linux running nice and smooth, with Mate.
Im happy about these setup, but Im stuck in something now: Im trying to copy around 400Gb from a USB 2.0 HDD (SamSung) with NTFS (already have ntfs-3g installed), but always the connection is droped, the disk is automatic umounted and mounted again, and my copy go to hell. large files are my madness, cant copy, the connection keep dropping.
DMESG:
[ 2098.493050] usb 1-1: USB disconnect, device number 4
[ 2099.219738] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[ 2099.225227] sd 3:0:0:0: [sdb]
[ 2099.228448] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2101.276074] usb 1-1: new high-speed USB device number 5 using ci_hdrc
[ 2101.399301] usb 1-1: New USB device found, idVendor=0bc2, idProduct=2300
[ 2101.407218] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2101.414447] usb 1-1: Product: Portable
[ 2101.418938] usb 1-1: Manufacturer: Seagate
[ 2101.423161] usb 1-1: SerialNumber: 2GH3PXAG
[ 2101.429681] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2101.436082] usb-storage 1-1:1.0: Quirks match for vid 0bc2 pid 2300: 200000
[ 2101.443549] scsi4 : usb-storage 1-1:1.0
[ 2102.450312] scsi 4:0:0:0: Direct-Access Seagate Portable 0130 PQ: 0 ANSI: 4
[ 2102.466141] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2102.466549] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2102.467221] sd 4:0:0:0: [sdc] Write Protect is off
[ 2102.467237] sd 4:0:0:0: [sdc] Mode Sense: 2f 08 00 00
[ 2102.467865] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2102.467876] sd 4:0:0:0: [sdc] Assuming drive cache: write back
[ 2102.471869] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2102.471881] sd 4:0:0:0: [sdc] Assuming drive cache: write back
[ 2102.538367] sdc: sdc1
[ 2102.545045] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2102.550395] sd 4:0:0:0: [sdc] Assuming drive cache: write back
[ 2102.556252] sd 4:0:0:0: [sdc] Attached SCSI disk
And I use this command to start my Mate, but this error happens with root on a console only:
exec dbus-launch mate-session
Please how can I do to resolve this ?
Thanx in advance by the help, and sorry about the bad English.
PS.: Im trying to copy the files in Mate. This External HDD works fine under windows, already did the copy on a windows machine.