Hi,
thanks for your reply.
Using the ubuntu ditribution build using the instruction on
https://eewiki.net/display/linuxonarm/i ... uick+Start, i've following output of the command lsmod
Module Size Used by
sg 31846 0
uas 14407 0
usb_storage 54039 1 uas
snd_soc_imx_sgtl5000 4360 0
mc13xxx_i2c 2509 0
mma8450 3078 0
mc13xxx_core 9958 1 mc13xxx_i2c
input_polldev 5811 1 mma8450
snd_soc_sgtl5000 16071 2
snd_soc_imx_audmux 6617 1 snd_soc_imx_sgtl5000
snd_soc_fsl_ssi 13686 2
imx_pcm_dma 1372 1 snd_soc_fsl_ssi
imx_pcm_fiq 4840 1 snd_soc_fsl_ssi
snd_soc_core 192538 5 imx_pcm_dma,imx_pcm_fiq,snd_soc_sgtl5000,snd_soc_imx_sgtl5000,snd_soc_fsl_ssi
snd_compress 13959 1 snd_soc_core
snd_pcm_dmaengine 5694 1 snd_soc_core
snd_pcm 98554 5 imx_pcm_fiq,snd_soc_core,snd_soc_sgtl5000,snd_soc_fsl_ssi,snd_pcm_dmaengine
pwm_imx 4189 0
snd_timer 23081 1 snd_pcm
snd 72452 4 snd_soc_core,snd_timer,snd_pcm,snd_compress
soundcore 8501 1 snd
evdev 11364 3
uio_pdrv_genirq 3803 0
uio 10249 1 uio_pdrv_genirq
I've loaded the same modules on ArchLinux ARM harmory and lsmod gives me following:
Module Size Used by
binfmt_misc 7270 1
mma8450 3121 0
input_polldev 5248 1 mma8450
snd_soc_imx_sgtl5000 4244 0
snd_soc_imx_audmux 5720 1 snd_soc_imx_sgtl5000
snd_soc_core 167488 1 snd_soc_imx_sgtl5000
snd_compress 8897 1 snd_soc_core
snd_pcm_dmaengine 5842 1 snd_soc_core
snd_pcm 93505 2 snd_soc_core,snd_pcm_dmaengine
snd_timer 22304 1 snd_pcm
ac97_bus 2035 1 snd_soc_core
pwm_imx 4035 0
uio_pdrv_genirq 3724 0
uio 10332 1 uio_pdrv_genirq
sch_fq_codel 8457 1
usb_f_ecm 7467 1
g_ether 5133 0
usb_f_rndis 16610 2 g_ether
u_ether 13470 3 usb_f_ecm,usb_f_rndis,g_ether
libcomposite 46688 3 usb_f_ecm,usb_f_rndis,g_ether
ip_tables 12671 0
x_tables 18625 1 ip_tables
Some missing modules are builtin.
I'm not able to use USB, ethernet, SD Card reader (and maybe other) using archlinux.
Using ubuntu, the lsusb command gives me following:
Bus 001 Device 004: ID 045e:0029 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 003: ID 046d:c30f Logitech, Inc. Logicool HID-Compliant Keyboard (106 key)
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
instead archlinux the output is empty.
I'm only able to connect via serial port.
If you need I can post the output of the dmesg command.
What I can check and do in order to make the QSB working?
Thanks