Marvell Uboot hanging on modules detected.

This forum is for supported devices using an ARMv7 Marvell SoC.

Marvell Uboot hanging on modules detected.

Postby bignellrp » Sat Apr 04, 2020 5:33 pm

I need some help unbricking a DS414r1 where the power was removed during a firmware upgrade. I managed to get to the console and got the following errors:

*** Warning - bad CRC, using default environment

Wrong Image Format for bootm command
ERROR: can't get kernel image!

So i loaded the kernel back on by downloading the latest 414 firmware from Synology, unpacking the pat file and using a USB formatted with rufus to fat16 to copy zImage and rd.bin

Marvell>> usb start

(Re)start USB...
USB: Active port: 0
Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found


Marvell>> fatload usb 0:1 2000000 zImage
reading zImage


2123952 bytes read

Marvell>> fatload usb 0:1 8000000 rd.bin
reading rd.bin

3698039 bytes read

Marvell>> sf probe 0 50000000

SF: Detected M25P64 with page size 64 KiB, total 8 MiB

Marvell>> save

Saving Environment to SPI Flash...
SF: Detected M25P64 with page size 64 KiB, total 8 MiB
Erasing SPI flash....Writing to SPI flash.....done

Marvell>> bootm 0x2000000 0x8000000

Great i thought, its booting. It booted back to the DS login page but when i rebooted the console now gets stuck at "modules detected"


MMC: MRVL_MMC: 0
SF: Detected M25P64 with page size 64 KiB, total 8 MiB
PEX 0.0(0): Root Complex Interface, Detected Link X4, GEN 1.1
PEX 1.0(1): Root Complex Interface, Detected Link X1, GEN 2.0
PEX 1.1(2): Detected No Link.
PEX 1.2(3): Detected No Link.
FPU initialized to Run Fast Mode.
USB 0: Host Mode
USB 1: Host Mode
USB 2: Device Mode
Modules Detected:


Is there a way to get back to the Marvell>> shell from here? Will it time out looking for modules? Is there a key i can press on the keyboard when it boots to go straight to Marvell shell?
bignellrp
 
Posts: 1
Joined: Sat Apr 04, 2020 5:30 pm

Return to Marvell

Who is online

Users browsing this forum: No registered users and 6 guests