USB on Odroid XU4

This forum is for supported devices using an ARMv7 Samsung SoC.

USB on Odroid XU4

Postby mhossbach » Tue Apr 04, 2017 7:37 am

I'm having some trouble running the latest kernel (4.9.20) on my Odroid XU4: With lots of USB traffic, I keep getting these messages in the syslog:

Code: Select all
kernel: usb 4-1.1: reset SuperSpeed USB device number 3 using xhci-hcd


As a result, the ext4 driver runs into problems, and finally remounts the drive read-only.

Now, this problem starts occuring when I update the system to kernel 4.9.x. When I revert to the last 3.x kernel, everything is fine again, so I doubt that it is any connectivity problem.

Anybody seen that behaviour?

Thanks...
mhossbach
 
Posts: 1
Joined: Tue Apr 04, 2017 7:27 am

Re: USB on Odroid XU4

Postby rontant » Sat May 27, 2017 1:19 am

I had this problem too but after doing full upgrade (pacman -Syu), the problem seems to have fixed itself.
Rock 64, Odroid XU4, Raspberry Pi 3, Pogo 4, Pogo Pink E02, Goflex
rontant
 
Posts: 19
Joined: Sat May 27, 2017 1:10 am
Location: Singapore

Re: USB on Odroid XU4

Postby rezad » Sat Jul 08, 2017 8:38 am

do you have cloudshell or direct usb to hdd via another externally powered enclosure?
I have this issue too and it is not fixed for me.
rezad
 
Posts: 19
Joined: Fri Jun 10, 2016 11:28 am


Return to Samsung

Who is online

Users browsing this forum: No registered users and 1 guest