Pandaboard does not boot with 4.16.6-1-ARCH kernel

This forum is for supported devices using an ARMv7 Texas Instruments (TI) SoC.

Pandaboard does not boot with 4.16.6-1-ARCH kernel

Postby Clueless » Mon May 07, 2018 7:57 pm

Hi,

after upgrading my kernel using pacman to 4.16.6-1-ARCH, I'm unable to boot my Pandaboard. Serial console prints the following:

U-Boot SPL 2017.07-1 (Sep 03 2017 - 16:19:26)
OMAP4460-GP ES1.1
Trying to boot from MMC1
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!


U-Boot 2017.07-1 (Sep 03 2017 - 16:19:26 +0000) Arch Linux ARM

CPU : OMAP4460-GP ES1.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0

** Unable to use mmc 0:1 for loading the env **
Using default environment

Net: No ethernet found.
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** File not found boot.scr **
** Unrecognized filesystem type **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
779 bytes read in 8 ms (94.7 KiB/s)
## Executing script at 80000000
6169936 bytes read in 288 ms (20.4 MiB/s)
80986 bytes read in 165 ms (478.5 KiB/s)
5306651 bytes read in 248 ms (20.4 MiB/s)
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8faf0000, end 8ffff91b ... OK
Loading Device Tree to 8fad9000, end 8faefc59 ... OK

Starting kernel ...
<and stops here>


With the previous kernel 4.15.5-1-ARCH which I used for the installation booting works. But now the weird part, when booting 4.15.5-1-ARCH, flipping to 4.16.6-1-ARCH and rebooting without removing power, it works. But as soon as I remove and reconnect the power, it hangs again.

Any clue what the reason could be?
Thanks!
Clueless
 
Posts: 2
Joined: Mon May 07, 2018 7:45 pm

Re: Pandaboard does not boot with 4.16.6-1-ARCH kernel

Postby Clueless » Sat Jun 09, 2018 9:05 am

Seems it has been fixed. :)
With Linux 4.17.0.1 the Pandaboard also boots after a power disconnect.
Clueless
 
Posts: 2
Joined: Mon May 07, 2018 7:45 pm


Return to Texas Instruments (TI)

Who is online

Users browsing this forum: No registered users and 2 guests