by flaviofachin » Thu Aug 04, 2016 9:52 am
This in about my kernel and about my cpu
$this->bbcode_second_pass_code('', '$: uname -a
Linux alarm 3.10.18-9-ARCH #1 SMP Thu Jun 9 11:08:37 CEST 2016 armv7l GNU/Linux
$: lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model name: ARMv7 Processor rev 3 (v7l)
CPU max MHz: 2116.5000
CPU min MHz: 204.0000')
I did open this tread, because my archlinux was complitely block and I could access just to chrome os.
I have had 4 consecutive attempts to boot with negative results, but the day late, everything worked fine by itself (perhaps it was that some process had somehow become harmful and warmed dangerously some component? Who Knows.. not me for sure!
I must say that later making other installation, I found to have internal conflicts with xorg.
Maybe it was that the cause of the issue... who knows me not por sure!
Anyway I'm still a beginner and i do not think it is useful to continue the tread...
Maybe it was the wrong think to do, but i decided to leave open the tread for see if anyone else had similar problems with xdev... but probably it is not.
however, i attach here in the folow, a fragment of a boot log that i had store in efi partition ( log_recovery/dmesg) where I found message, that seemes at the same point where the issue occured:
(i marked the precise point with *)
$this->bbcode_second_pass_code('', '.....
[ 65.569928] hdmi_state_machine_worker (tid ed83ad00): state 0 (Reset), hpd 0, pending_hpd_evt 1
[ 65.569936] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 0 (Reset)
[ 65.570945] tegra-xhci 70090000.usb: XUSB device id = 0xfa3
[ 65.572152] tegra-xhci 70090000.usb: Firmware File: nvidia/tegra124/xusb.bin (134656 Bytes)
[ 65.572262] tegra-xhci 70090000.usb: Firmware DMA Memory: dma 0xad9c0000 mapped 0xf034b000 (134656 Bytes)
[ 65.576578] power_supply (null): sbs-5-000b: Found supply : bq24735@5-0009
* [ 65.601944] hdmi_state_machine_worker (tid ed83ad00): state 0 (Reset), hpd 0, pending_hpd_evt 0
* [ 65.601966] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
* [ 65.613483] hdmi_state_machine_worker (tid ed83ad00): state 1 (Check Plug), hpd 0,
* pending_hpd_evt 0
* [ 65.613502] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 3
* (Disabled)
[ 65.633792] tegra-xhci 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC, Falcon state 0x20
[ 65.634109] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 65.634279] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
....')
I'm look for the way to mark this tread as solved, but actually i don't see how...
(Or maybe sould i just insert it in the title?)