Jetson-TK1: X slow to start

This forum is for supported devices using an ARMv7 nVidia SoC.

Jetson-TK1: X slow to start

Postby arcangeli » Sun Aug 23, 2015 4:34 pm

hi,
Since the installation of arch, i've made a big pacman -Syu. All without error.
But now, X is very slow to start with a "systemd-logind: failed to get session: PID 395 does not belong to any known session"
After starting, no GL or EGL application work.

EDIT: GL and EGL was related to an update of mesa. Problem now solved but x start is always slow

X log:
Code: Select all
[    14.871]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[    14.872] X Protocol Version 11, Revision 0
[    14.872] Build Operating System: Linux 3.10.69-1-ARCH armv7l
[    14.872] Current Operating System: Linux jetson 3.10.40-grinch-21.3.4 #1 SMP PREEMPT Fri May 1 10:41:09 UTC 2015 armv7l
[    14.872] Kernel command line: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 mem=2015M@2048M memtype=255 ddr_die=2048M@2048M section=256M pmuboard=0x0177:0x0000:0x02:0x43:0x00 tsec=32M@3913M otf_key=c75e5bb91eb3bd947560357b64422f85 usbcore.old_scheme_first=1 core_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 debug_uartport=lsport,3 power_supply=Adapter audio_codec=rt5640 modem_id=0 android.kerneltype=normal fbcon=map:1 commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 board_info=0x0177:0x0000:0x02:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait init=/usr/lib/systemd/systemd tegraboot=sdmmc gpt
[    14.873] Build Date: 17 July 2015  12:23:38PM
[    14.873] 
[    14.873] Current version of pixman: 0.32.6
[    14.873]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    14.873] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.874] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 23 18:06:14 2015
[    14.890] (==) Using config file: "/etc/X11/xorg.conf"
[    14.890] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.894] (==) No Layout section.  Using the first Screen section.
[    14.894] (==) No screen section available. Using defaults.
[    14.894] (**) |-->Screen "Default Screen Section" (0)
[    14.894] (**) |   |-->Monitor "<default monitor>"
[    14.896] (==) No device specified for screen "Default Screen Section".
   Using the first device section listed.
[    14.896] (**) |   |-->Device "Tegra0"
[    14.896] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    14.896] (==) Automatically adding devices
[    14.896] (==) Automatically enabling devices
[    14.896] (==) Automatically adding GPU devices
[    14.909] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    14.910]    Entry deleted from font path.
[    14.911] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    14.911]    Entry deleted from font path.
[    14.911]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    14.912] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    14.912]    Entry deleted from font path.
[    14.912]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    14.912] (==) FontPath set to:
   /usr/share/fonts/misc/,
   /usr/share/fonts/TTF/,
   /usr/share/fonts/OTF/
[    14.912] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.912] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.912] (II) Loader magic: 0x1def28
[    14.912] (II) Module ABI versions:
[    14.912]    X.Org ANSI C Emulation: 0.4
[    14.913]    X.Org Video Driver: 19.0
[    14.913]    X.Org XInput driver : 21.1
[    14.913]    X.Org Server Extension : 9.0
[    14.919] (EE) systemd-logind: failed to get session: PID 395 does not belong to any known session
[    14.921] (II) no primary bus or device found
[    14.921] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[    14.921] (II) "glx" will be loaded by default.
[    14.921] (II) LoadModule: "extmod"
[    14.922] (II) Module "extmod" already built-in
[    14.922] (II) LoadModule: "glx"
[    14.942] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.238] (II) Module glx: vendor="NVIDIA Corporation"
[    15.239]    compiled for 4.0.2, module version = 1.0.0
[    15.239]    Module class: X.Org Server Extension
[    15.239] (II) NVIDIA GLX Module  21.4  Release Build  (integ_stage_rel)  (buildbrain@mobile-u64-286)  Thu Jun 25 15:24:45 PDT 2015
[    15.239] (II) LoadModule: "nvidia"
[    15.240] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    15.272] (II) Module nvidia: vendor="NVIDIA Corporation"
[    15.272]    compiled for 4.0.2, module version = 1.0.0
[    15.272]    Module class: X.Org Video Driver
[    15.296] (II) NVIDIA dlloader X Driver  21.4  Release Build  (integ_stage_rel)  (buildbrain@mobile-u64-286)  Thu Jun 25 15:26:03 PDT 2015
[    15.296] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    15.296] (++) using VT number 7

[    15.311] (WW) Falling back to old probe method for NVIDIA
[    15.311] (II) Loading sub module "fb"
[    15.311] (II) LoadModule: "fb"
[    15.312] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.316] (II) Module fb: vendor="X.Org Foundation"
[    15.316]    compiled for 1.17.2, module version = 1.0.0
[    15.316]    ABI class: X.Org ANSI C Emulation, version 0.4
[    15.316] (WW) Unresolved symbol: fbGetGCPrivateKey
[    15.316] (II) Loading sub module "wfb"
[    15.316] (II) LoadModule: "wfb"
[    15.317] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    15.321] (II) Module wfb: vendor="X.Org Foundation"
[    15.321]    compiled for 1.17.2, module version = 1.0.0
[    15.321]    ABI class: X.Org ANSI C Emulation, version 0.4
[    15.321] (II) Loading sub module "ramdac"
[    15.321] (II) LoadModule: "ramdac"
[    15.321] (II) Module "ramdac" already built-in
[    15.328] (II) NVIDIA(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    15.328] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    15.328] (==) NVIDIA(0): RGB weight 888
[    15.328] (==) NVIDIA(0): Default visual is TrueColor
[    15.329] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.329] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "true"
[    15.329] (**) NVIDIA(0): Enabling 2D acceleration
[   256.107] (II) NVIDIA(0): NVIDIA GPU GK20A/NullRM (GK20A) at SoC (GPU-0)
[   256.107] (--) NVIDIA(0): Memory: 1933312 kBytes
[   256.107] (--) NVIDIA(0): VideoBIOS:
[   256.107] (--) NVIDIA(0): Valid display device(s) on GK20A/NullRM at SoC
[   256.107] (--) NVIDIA(0):     DFP-0 (connected)
[   256.107] (--) NVIDIA(0):     DFP-1 (connected)
[   256.107] (--) NVIDIA(0): DFP-0: External TMDS
[   256.107] (--) NVIDIA(0): DFP-1: External TMDS
[   256.108] (**) NVIDIA(0): Option "Ignore"
[   256.108] (**) NVIDIA(0): Ignoring display device DFP-0
[   256.108] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   256.108] (**) NVIDIA(0):     device DFP-1 (Using EDID frequencies has been enabled on
[   256.108] (**) NVIDIA(0):     all display devices.)
[   256.109] (==) NVIDIA(0):
[   256.109] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   256.109] (==) NVIDIA(0):     will be used as the requested mode.
[   256.109] (==) NVIDIA(0):
[   256.110] (II) NVIDIA(0): Validated MetaModes:
[   256.110] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select"
[   256.110] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
[   256.114] (WW) NVIDIA(0): Unable to get display device DFP-1's EDID; cannot compute DPI
[   256.114] (WW) NVIDIA(0):     from DFP-1's EDID.
[   256.114] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[   256.114] (--) Depth 24 pixmap format is 32 bpp
[   256.123] (WW) NVIDIA(GPU-0): Failed to enter interactive mode.
[   256.141] (EE) NVIDIA(0): Failed to allocate NVIDIA Error Handler
[   256.141] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   256.141] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   256.141] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   256.141] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   256.141] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   256.142] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   256.142] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   256.142] (II) NVIDIA(0):     Config Options in the README.
[   256.142] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[   256.351] (==) NVIDIA(0): Disabling shared memory pixmaps
[   256.351] (==) NVIDIA(0): Backing store enabled
[   256.351] (==) NVIDIA(0): Silken mouse enabled
[   256.366] (==) NVIDIA(0): DPMS enabled
[   256.378] (EE) NVIDIA(0): Failed to allocate NVIDIA Damage Manager
[   256.378] (II) Loading sub module "dri2"
[   256.378] (II) LoadModule: "dri2"
[   256.378] (II) Module "dri2" already built-in
[   256.378] (II) NVIDIA(0): [DRI2] Setup complete
[   256.378] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   256.379] (--) RandR disabled
[   256.427] (II) Initializing extension GLX
[   256.427] (II) Indirect GLX disabled.(II) config/udev: Adding input device gpio-keys.4 (/dev/input/event3)
[   256.705] (**) gpio-keys.4: Applying InputClass "evdev keyboard catchall"
[   256.705] (II) LoadModule: "evdev"
[   256.705] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   256.711] (II) Module evdev: vendor="X.Org Foundation"
[   256.711]    compiled for 1.17.1, module version = 2.9.2
[   256.711]    Module class: X.Org XInput Driver
[   256.712]    ABI class: X.Org XInput driver, version 21.0
[   256.712] (II) Using input driver 'evdev' for 'gpio-keys.4'
[   256.712] (**) gpio-keys.4: always reports core events
[   256.712] (**) evdev: gpio-keys.4: Device: "/dev/input/event3"
[   256.712] (--) evdev: gpio-keys.4: Vendor 0x1 Product 0x1
[   256.712] (--) evdev: gpio-keys.4: Found keys
[   256.712] (II) evdev: gpio-keys.4: Configuring as keyboard
[   256.712] (**) Option "config_info" "udev:/sys/devices/platform/gpio-keys.4/input/input3/event3"
[   256.713] (II) XINPUT: Adding extended input device "gpio-keys.4" (type: KEYBOARD, id 6)
[   256.713] (**) Option "xkb_rules" "evdev"
[   256.713] (**) Option "xkb_model" "pc104"
[   256.713] (**) Option "xkb_layout" "us"
[   256.831] (II) config/udev: Adding input device   Wireless Air mouse Keyboard (/dev/input/event0)
[   256.831] (**)   Wireless Air mouse Keyboard: Applying InputClass "evdev keyboard catchall"
[   256.831] (II) Using input driver 'evdev' for '  Wireless Air mouse Keyboard'
[   256.831] (**)   Wireless Air mouse Keyboard: always reports core events
[   256.832] (**) evdev:   Wireless Air mouse Keyboard: Device: "/dev/input/event0"
[   256.832] (--) evdev:   Wireless Air mouse Keyboard: Vendor 0x1997 Product 0x1221
[   256.832] (--) evdev:   Wireless Air mouse Keyboard: Found keys
[   256.832] (II) evdev:   Wireless Air mouse Keyboard: Configuring as keyboard
[   256.832] (**) Option "config_info" "udev:/sys/devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input0/event0"
[   256.832] (II) XINPUT: Adding extended input device "  Wireless Air mouse Keyboard" (type: KEYBOARD, id 7)
[   256.832] (**) Option "xkb_rules" "evdev"
[   256.832] (**) Option "xkb_model" "pc104"
[   256.833] (**) Option "xkb_layout" "us"
[   256.839] (II) config/udev: Adding input device   Wireless Air mouse Keyboard (/dev/input/event1)
[   256.839] (**)   Wireless Air mouse Keyboard: Applying InputClass "evdev pointer catchall"
[   256.839] (**)   Wireless Air mouse Keyboard: Applying InputClass "evdev keyboard catchall"
[   256.839] (II) Using input driver 'evdev' for '  Wireless Air mouse Keyboard'
[   256.839] (**)   Wireless Air mouse Keyboard: always reports core events
[   256.839] (**) evdev:   Wireless Air mouse Keyboard: Device: "/dev/input/event1"
[   256.839] (--) evdev:   Wireless Air mouse Keyboard: Vendor 0x1997 Product 0x1221
[   256.840] (--) evdev:   Wireless Air mouse Keyboard: Found 12 mouse buttons
[   256.840] (--) evdev:   Wireless Air mouse Keyboard: Found scroll wheel(s)
[   256.840] (--) evdev:   Wireless Air mouse Keyboard: Found relative axes
[   256.840] (--) evdev:   Wireless Air mouse Keyboard: Found x and y relative axes
[   256.840] (--) evdev:   Wireless Air mouse Keyboard: Found absolute axes
[   256.840] (II) evdev:   Wireless Air mouse Keyboard: Forcing absolute x/y axes to exist.
[   256.840] (--) evdev:   Wireless Air mouse Keyboard: Found keys
[   256.840] (II) evdev:   Wireless Air mouse Keyboard: Configuring as mouse
[   256.840] (II) evdev:   Wireless Air mouse Keyboard: Configuring as keyboard
[   256.840] (II) evdev:   Wireless Air mouse Keyboard: Adding scrollwheel support
[   256.840] (**) evdev:   Wireless Air mouse Keyboard: YAxisMapping: buttons 4 and 5
[   256.840] (**) evdev:   Wireless Air mouse Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   256.840] (**) Option "config_info" "udev:/sys/devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.1/input/input1/event1"
[   256.841] (II) XINPUT: Adding extended input device "  Wireless Air mouse Keyboard" (type: KEYBOARD, id 8)
[   256.841] (**) Option "xkb_rules" "evdev"
[   256.841] (**) Option "xkb_model" "pc104"
[   256.841] (**) Option "xkb_layout" "us"
[   256.842] (II) evdev:   Wireless Air mouse Keyboard: initialized for relative axes.
[   256.842] (WW) evdev:   Wireless Air mouse Keyboard: ignoring absolute axes.
[   256.843] (**)   Wireless Air mouse Keyboard: (accel) keeping acceleration scheme 1
[   256.843] (**)   Wireless Air mouse Keyboard: (accel) acceleration profile 0
[   256.843] (**)   Wireless Air mouse Keyboard: (accel) acceleration factor: 2.000
[   256.843] (**)   Wireless Air mouse Keyboard: (accel) acceleration threshold: 4
[   256.846] (II) config/udev: Adding input device tegra-rt5639 Headphone Jack (/dev/input/event2)
[   256.846] (II) No input driver specified, ignoring this device.
[   256.846] (II) This device may have been added with another device file.
Last edited by arcangeli on Sun Aug 23, 2015 7:15 pm, edited 1 time in total.
arcangeli
 
Posts: 6
Joined: Sun Oct 12, 2014 11:12 am

Re: Jetson-TK1: X slow to start

Postby arcangeli » Sun Aug 23, 2015 4:34 pm

dmesg:
Code: Select all
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.40-grinch-21.3.4 (root@tegra-ubuntu) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-19ubuntu1) ) #1 SMP PREEMPT Fri May 1 10:41:09 UTC 2015
[    0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine: jetson-tk1, model: NVIDIA Tegra124 PM375, serial: 0
[    0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space
[    0.000000] Found tsec, start=0xf4900000 size=2000000
[    0.000000] Tegra reserved memory:
               LP0:                    f46ff000 - f46ff80f
               Bootloader framebuffer: 00000000 - 00000000
               Bootloader framebuffer2: 00000000 - 00000000
               Framebuffer:            f8500000 - f96fffff
               2nd Framebuffer:        f9700000 - fdefffff
               Carveout:               00000000 - 00000000
               Vpr:                    00000000 - 00000000
               Tsec:                   f4900000 - f68fffff
[    0.000000] cma: CMA: reserved 16 MiB at ae800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 492288
[    0.000000] free_area_init_node: node 0, pgdat c0c9e480, node_mem_map c0e09000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2510 pages used for memmap
[    0.000000]   HighMem zone: 297728 pages, LIFO batch:31
[    0.000000] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm/boot/dts/tegra124-jetson_tk1-pm375-000-c00-00.dts
[    0.000000] Tegra12: CPU Speedo value 2316, Soc Speedo value 2250, Gpu Speedo value 2154
[    0.000000] Tegra12: CPU Speedo ID 1, Soc Speedo ID 1, Gpu Speedo ID 1
[    0.000000] Tegra12: CPU Process ID 1,Soc Process ID 1,Gpu Process ID 1
[    0.000000] Tegra Revision: A01 SKU: 0x81 CPU Process: 1 Core Process: 1
[    0.000000] tegra: PLLP fixed rate: 408000000
[    0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON
[    0.000000] tegra_clk_shared_bus_user_init: c4bus client vi left ON
[    0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1092000000
[    0.000000] Lowering sbus maximum rate from 420000000 to 384000000
[    0.000000] Lowering vic03 maximum rate from 900000000 to 828000000
[    0.000000] Lowering tsec maximum rate from 900000000 to 828000000
[    0.000000] Lowering msenc maximum rate from 600000000 to 528000000
[    0.000000] Lowering se maximum rate from 600000000 to 528000000
[    0.000000] Lowering vde maximum rate from 600000000 to 528000000
[    0.000000] Lowering host1x maximum rate from 500000000 to 444000000
[    0.000000] Lowering vi maximum rate from 700000000 to 600000000
[    0.000000] Lowering isp maximum rate from 700000000 to 600000000
[    0.000000] Lowering c4bus maximum rate from 700000000 to 600000000
[    0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
[    0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000
[    0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000
[    0.000000] Lowering hdmi maximum rate from 594000000 to 297000000
[    0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000
[    0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000
[    0.000000] Lowering gbus maximum rate from 1032000000 to 852000000
[    0.000000] Lowering cpu_g maximum rate from 3000000000 to 2320500000
[    0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled
[    0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
[    0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
[    0.000000] Switching to timer-based delay loop
[    0.000000] tegra_powergate_init: DONE
[    0.000000] tegra12_plle_clk_enable: pll_e is already enabled
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1df3000 s14976 r8192 d13696 u36864
[    0.000000] pcpu-alloc: s14976 r8192 d13696 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 490768
[    0.000000] Kernel command line: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 mem=2015M@2048M memtype=255 ddr_die=2048M@2048M section=256M pmuboard=0x0177:0x0000:0x02:0x43:0x00 tsec=32M@3913M otf_key=c75e5bb91eb3bd947560357b64422f85 usbcore.old_scheme_first=1 core_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 debug_uartport=lsport,3 power_supply=Adapter audio_codec=rt5640 modem_id=0 android.kerneltype=normal fbcon=map:1 commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 board_info=0x0177:0x0000:0x02:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait init=/usr/lib/systemd/systemd tegraboot=sdmmc gpt
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4126720 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 1923MB = 1923MB total
[    0.000000] Memory: 1916964k/1916964k available, 146396k reserved, 1190908K highmem
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
                   vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc0ade1f8   (11097 kB)
                     .init : 0xc0adf000 - 0xc0b59a80   ( 491 kB)
                     .data : 0xc0b5a000 - 0xc0cb4eb8   (1388 kB)
                      .bss : 0xc0cb4eb8 - 0xc0d3dc64   ( 548 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:960
[    0.000000] the number of interrupt controllers found is 5
[    0.000000] Architected local timer running at 12.00MHz (phys).
[    0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
[    0.000000] Ignoring duplicate/late registration of read_current_timer delay
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.002950] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000
[    0.003005] pid_max: default: 32768 minimum: 301
[    0.003339] Mount-cache hash table entries: 512
[    0.025841] Initializing cgroup subsys debug
[    0.025883] Initializing cgroup subsys memory
[    0.025956] Initializing cgroup subsys devices
[    0.025987] Initializing cgroup subsys freezer
[    0.026017] Initializing cgroup subsys perf_event
[    0.026107] CPU: Testing write buffer coherency: ok
[    0.026169] ftrace: allocating 30253 entries in 60 pages
[    0.064485] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.064525] Setting up static identity map for 0xc07dab50 - 0xc07dabf4
[    0.068471] ftrace: Allocated trace_printk buffers
[    0.075179] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.078204] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.081247] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.081445] Brought up 4 CPUs
[    0.081502] SMP: Total of 4 processors activated.
[    0.081518] CPU: All CPU(s) started in SVC mode.
[    0.082511] devtmpfs: initialized
[    0.091361] pinctrl core: initialized pinctrl subsystem
[    0.091723] regulator-dummy: no parameters
[    0.092643] NET: Registered protocol family 16
[    0.095061] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.096368] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver
[    0.097906] console [pstore-1] enabled
[    0.097944] ramoops: attached 0x200000@0xf8300000, ecc: 0/0
[    0.098321] cpuidle: using governor ladder
[    0.098343] cpuidle: using governor menu
[    0.102043] ardbeg_camera_auxdata: update camera lookup table.
[    0.107077] pinmux core: 70000868.pinmux does not support function dsi_b
[    0.107108] tegra124-pinctrl 70000868.pinmux: invalid function dsi_b in map table
[    0.110775] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default
[    0.111184] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
[    0.117949] Wake16 for irq=34
[    0.120373] Wake58 for irq=81
[    0.120421] Wake41 for irq=129
[    0.120439] Wake43 for irq=129
[    0.120483] Wake40 for irq=53
[    0.120500] Wake42 for irq=53
[    0.124757] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x45:0x44:0x00
[    0.124839] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x45:0x44:0x00
[    0.124902] disp1 pclk=154700000
[    0.124912] disp2 pclk=297000000
[    0.124921] Selecting UARTD as the debug console
[    0.124963] The debug console clock name is uartd
[    0.125381] ardbeg_modem_init: modem_id = 0
[    0.128085] Clear bootloader IO dpd settings
[    0.128322] Loading jetson TK1 EMC tables.
[    0.128582] tegra: pll_m is selected as scalable EMC clock source
[    0.128624] Lowering emc maximum rate from 1200000000 to 924000000
[    0.128652] tegra: validated EMC DFS table
[    0.128777] ardbeg_edp_init: CPU regulator 11000 mA
[    0.470917] ardbeg_edp_init: GPU regulator 10500 mA
[    0.471882] swapper/0 isomgr_init(): iso emc max clk=924000KHz
[    0.471903] swapper/0 isomgr_init(): max_iso_bw=7392000KB
[    0.472252] ardbeg_touch_init init raydium touch
[    0.472395] Raydium - touch platform_id :  8
[    0.554541] platform tegradc.0: IOVA linear map 0xf8500000(1200000)
[    0.557409] platform tegradc.0: IOVA linear map 0xf9700000(4800000)
[    0.561766] platform tegradc.1: IOVA linear map 0xf8500000(1200000)
[    0.564629] platform tegradc.1: IOVA linear map 0xf9700000(4800000)
[    0.565206] tegra11_soctherem_oc_int_init(): OC interrupts are not enabled
[    0.565631] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.565661] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.565961] mc-err: Started MC error interface!
[    0.566978] tegra_arb_init: initialized
[    0.576694] bio: create slab <bio-0> at 0
[    0.578578] reg-fixed-voltage 0.regulator: Consumer c1 does not have device name
[    0.578613] reg-fixed-voltage 0.regulator: Consumer c2 does not have device name
[    0.578643] of_get_named_gpio_flags: can't parse gpios property
[    0.578743] vdd-ac-bat: 8400 mV
[    0.578883] reg-fixed-voltage 1.regulator: Consumer c1 does not have device name
[    0.578916] reg-fixed-voltage 1.regulator: Consumer c2 does not have device name
[    0.578944] of_get_named_gpio_flags: can't parse gpios property
[    0.579035] vdd-3v3-aon: 3300 mV
[    0.579184] reg-fixed-voltage 8.regulator: Consumer c1 does not have device name
[    0.579216] reg-fixed-voltage 8.regulator: Consumer c2 does not have device name
[    0.579246] reg-fixed-voltage 8.regulator: Consumer c3 does not have device name
[    0.579282] reg-fixed-voltage 8.regulator: Consumer c6 does not have device name
[    0.579311] reg-fixed-voltage 8.regulator: Consumer c7 does not have device name
[    0.579340] reg-fixed-voltage 8.regulator: Consumer c8 does not have device name
[    0.579369] reg-fixed-voltage 8.regulator: Consumer c9 does not have device name
[    0.579398] reg-fixed-voltage 8.regulator: Consumer c10 does not have device name
[    0.579446] reg-fixed-voltage 8.regulator: Consumer c11 does not have device name
[    0.579477] reg-fixed-voltage 8.regulator: Consumer c12 does not have device name
[    0.579520] of_get_named_gpio_flags: can't parse gpios property
[    0.579618] reg-3v3-supply: 3300 mV
[    0.581241] vgaarb: loaded
[    0.581876] SCSI subsystem initialized
[    0.582063] libata version 3.00 loaded.
[    0.582244] usbcore: registered new interface driver usbfs
[    0.582309] usbcore: registered new interface driver hub
[    0.582419] usbcore: registered new device driver usb
[    0.582674] of_get_named_gpio_flags exited with status 20
[    0.582692] of_get_named_gpio_flags exited with status 21
[    0.583090] of_get_named_gpio_flags exited with status 157
[    0.583108] of_get_named_gpio_flags exited with status 158
[    0.583341] of_get_named_gpio_flags exited with status 217
[    0.583358] of_get_named_gpio_flags exited with status 218
[    0.583601] of_get_named_gpio_flags exited with status 172
[    0.583619] of_get_named_gpio_flags exited with status 173
[    0.583841] of_get_named_gpio_flags exited with status 206
[    0.583858] of_get_named_gpio_flags exited with status 207
[    0.585284] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x15
[    0.585313] as3722 4-0040: Final OTP version 1V21
[    0.590185] gpiochip_find_base: found new base at 1016
[    0.590275] gpiochip_add: registered GPIOs 1016 to 1023 on device: as3722-gpio
[    0.590309] GPIO chip as3722-gpio: created GPIO range 0->7 ==> as3722-pinctrl PIN 0->7
[    0.590476] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.590534] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.590606] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.590639] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.590669] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[    0.590700] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
[    0.590756] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.590787] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.590817] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[    0.590847] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
[    0.590877] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name
[    0.590907] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
[    0.590937] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name
[    0.590999] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.591030] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.591060] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[    0.591090] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
[    0.591122] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
[    0.591155] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
[    0.591184] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
[    0.591215] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name
[    0.591245] as3722-regulator as3722-regulator.0: Consumer c11 does not have device name
[    0.591275] as3722-regulator as3722-regulator.0: Consumer c12 does not have device name
[    0.591305] as3722-regulator as3722-regulator.0: Consumer c13 does not have device name
[    0.591335] as3722-regulator as3722-regulator.0: Consumer c14 does not have device name
[    0.591365] as3722-regulator as3722-regulator.0: Consumer c15 does not have device name
[    0.591417] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.591448] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.591498] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.591529] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.591559] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[    0.591605] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
[    0.591636] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name
[    0.591667] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
[    0.591697] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name
[    0.591726] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
[    0.591756] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
[    0.591812] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.591843] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[    0.591930] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
[    0.591960] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
[    0.591990] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name
[    0.592043] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.592091] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.592120] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.592150] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[    0.592208] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.592238] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.592294] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.592341] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.592371] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.592442] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
[    0.592472] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
[    0.592502] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
[    0.593429] vdd-cpu: 650 <--> 1300 mV at 1000 mV 3500 mA
[    0.594189] vdd-core: applied init 1000000uV constraint
[    0.594786] vdd-core: 700 <--> 1350 mV at 1000 mV 3500 mA
[    0.595968] vddio-ddr: at 1350 mV
[    0.596299] as3722-sd3: no parameters
[    0.596872] avdd-pll-pex: 1050 mV
[    0.598073] vdd-1v8: at 1800 mV
[    0.598417] vdd-gpu: applied init 1000000uV constraint
[    0.599291] vdd-gpu: 650 <--> 1200 mV at 1000 mV 3500 mA
[    0.599787] avdd-pll: at 1050 mV at 300 mA
[    0.601050] vdd-cam: 1800 mV at 150 mA
[    0.601732] avdd-dsi-csi: at 1200 mV at 150 mA
[    0.602947] vdd-rtc: 800 mV at 150 mA
[    0.603426] avdd-cam: 2800 mV at 150 mA
[    0.603912] vdd-1v2-cam: 1175 mV at 150 mA
[    0.604289] vddio-sdmmc-2: 1800 <--> 3300 mV at 150 mA
[    0.604780] vdd-1v1-cam: 1275 mV at 150 mA
[    0.605751] avdd-spi: 3300 mV at 150 mA
[    0.606254] vdd-2v7-cam: 2800 mV at 150 mA
[    0.606778] vpp-fuse: 1800 mV at 150 mA
[    0.607354] of_get_named_gpio_flags: can't parse gpios property
[    0.607365] of_get_named_gpio_flags: can't parse gpios property
[    0.607841] Linux video capture interface: v2.00
[    0.608947] Advanced Linux Sound Architecture Driver Initialized.
[    0.609409] ardbeg_wifi_power: 1
[    0.709625] of_get_named_gpio_flags exited with status 108
[    0.709746] usb0-vbus: 5000 mV
[    0.709930] of_get_named_gpio_flags exited with status 109
[    0.710045] usb1-usb2-vbus: 5000 mV
[    0.710219] of_get_named_gpio_flags exited with status 86
[    0.710334] vdd-hdmi: 5000 mV
[    0.710526] of_get_named_gpio_flags exited with status 63
[    0.710630] avdd-hdmi-pll: 3300 mV
[    0.710678] avdd-hdmi-pll: supplied by avdd-pll-pex
[    0.710852] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name
[    0.710894] of_get_named_gpio_flags exited with status 122
[    0.710993] vdd-lcd-bl: 3300 mV
[    0.711177] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name
[    0.711220] of_get_named_gpio_flags exited with status 58
[    0.711321] vdd-lcd-bl-en: 5000 mV
[    0.711487] reg-fixed-sync-voltage 9.regulator: Consumer c3 does not have device name
[    0.711518] of_get_named_gpio_flags: can't parse gpios property
[    0.711619] reg-5v0-supply: 5000 mV
[    0.711793] reg-fixed-sync-voltage a.regulator: Consumer c1 does not have device name
[    0.711826] reg-fixed-sync-voltage a.regulator: Consumer c2 does not have device name
[    0.711857] reg-fixed-sync-voltage a.regulator: Consumer c3 does not have device name
[    0.711903] reg-fixed-sync-voltage a.regulator: Consumer c10 does not have device name
[    0.711933] reg-fixed-sync-voltage a.regulator: Consumer c11 does not have device name
[    0.711963] reg-fixed-sync-voltage a.regulator: Consumer c12 does not have device name
[    0.711993] reg-fixed-sync-voltage a.regulator: Consumer c13 does not have device name
[    0.712022] reg-fixed-sync-voltage a.regulator: Consumer c14 does not have device name
[    0.712052] reg-fixed-sync-voltage a.regulator: Consumer c15 does not have device name
[    0.712104] of_get_named_gpio_flags: can't parse gpios property
[    0.712192] reg-1v8-supply: 1800 mV
[    0.712518] reg-fixed-sync-voltage b.regulator: Consumer c1 does not have device name
[    0.712561] of_get_named_gpio_flags exited with status 138
[    0.712672] reg-dcdc-1v2: 1200 mV
[    0.712842] reg-fixed-sync-voltage c.regulator: Consumer c7 does not have device name
[    0.712875] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name
[    0.712915] of_get_named_gpio_flags exited with status 1018
[    0.713418] as3722-gpio2-supply: 3300 mV
[    0.713645] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name
[    0.713689] of_get_named_gpio_flags exited with status 1020
[    0.714167] as3722-gpio4-supply: 3300 mV
[    0.714343] of_get_named_gpio_flags exited with status 136
[    0.714450] sdmmc-en-supply: 3300 mV
[    0.714628] of_get_named_gpio_flags exited with status 138
[    0.714717] vdd-cdc-1v2-aud: 1200 mV
[    0.714870] reg-fixed-sync-voltage 10.regulator: Consumer c1 does not have device name
[    0.714903] reg-fixed-sync-voltage 10.regulator: Consumer c2 does not have device name
[    0.714934] reg-fixed-sync-voltage 10.regulator: Consumer c3 does not have device name
[    0.714961] of_get_named_gpio_flags: can't parse gpios property
[    0.715055] reg-aon-1v8: 1800 mV
[    0.715214] reg-fixed-sync-voltage 11.regulator: Consumer c1 does not have device name
[    0.715243] of_get_named_gpio_flags: can't parse gpios property
[    0.715340] reg-aon-1v2: 1200 mV
[    0.718307] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected
[    0.721606] tegra: started io power detection dynamic control
[    0.721631] tegra: NO_IO_POWER setting 0x0
[    0.721655] Switching to clocksource arch_sys_counter
[    0.743137] nvmap_heap_init: nvmap_heap_init: created heap block cache
[    0.743326] nvmap_page_pool_init: Total MB RAM: 1888
[    0.743349] nvmap_page_pool_init: nvmap page pool size: 60416 pages (236 MB)
[    0.843820] nvmap_page_pool_init: highmem=25600, pool_size=60416,totalram=483337, freeram=454397, totalhigh=297727, freehigh=272057
[    0.844568]  iram: dma coherent mem declare 0x40001000,258048
[    0.845377] misc nvmap: created heap iram base 0x40001000 size (252KiB)
[    0.845530] nvmap:inner cache maint threshold=2097152
[    0.854979] Wake39 for irq=52
[    0.855091] tegra-otg tegra-otg: otg transceiver registered
[    0.855452] NET: Registered protocol family 2
[    0.856198] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.856405] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.856596] TCP: Hash tables configured (established 8192 bind 8192)
[    0.856656] TCP: reno registered
[    0.856680] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.856755] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.857084] NET: Registered protocol family 1
[    0.857463] RPC: Registered named UNIX socket transport module.
[    0.857487] RPC: Registered udp transport module.
[    0.857506] RPC: Registered tcp transport module.
[    0.857524] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.857548] PCI: CLS 0 bytes, default 64
[    0.857820] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
[    0.863006] host1x host1x: initialized
[    0.864251] CPU PMU: probing PMU on CPU 0
[    0.864285] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
[    0.864922] tegra_throttle : init passed
[    0.865009] Tegra cpuquiet initialized: disabled
[    0.865137] cpu-tegra: init EDP limit: 2320 MHz
[    0.866105] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm
[    0.866515] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm
[    0.866754] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm
[    0.866994] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[    0.868543] bounce pool size: 64 pages
[    0.868996] VFS: Disk quotas dquot_6.5.2
[    0.869220] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.870142] NFS: Registering the id_resolver key type
[    0.870191] Key type id_resolver registered
[    0.870211] Key type id_legacy registered
[    0.870256] fuse init (API version 7.22)
[    0.870502] msgmni has been set to 1450
[    0.872057] io scheduler noop registered (default)
[    0.872396] of_get_named_gpio_flags: can't parse gpios property
[    0.872407] of_get_named_gpio_flags: can't parse gpios property
[    0.872416] of_get_named_gpio_flags: can't parse gpios property
[    1.073350] PCIE: port 0: link down, retrying
[    1.273413] PCIE: port 0: link down, retrying
[    1.473475] PCIE: port 0: link down, retrying
[    1.473495] PCIE: port 0: link down, ignoring
[    1.478645] PCI host bridge to bus 0000:00
[    1.478673] pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff]
[    1.478702] pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref]
[    1.478750] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[    1.478778] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.478839] pci 0000:00:00.0: [10de:0e13] type 01 class 0x060400
[    1.478934] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.479157] PCI: bus0: Fast back to back transfers disabled
[    1.479185] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.479387] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    1.479420] pci 0000:01:00.0: reg 10: [io  0x0000-0x00ff]
[    1.479467] pci 0000:01:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit]
[    1.479499] pci 0000:01:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.479601] pci 0000:01:00.0: supports D1 D2
[    1.479612] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.481766] PCI: bus1: Fast back to back transfers disabled
[    1.481796] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.481813] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    1.482110] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    1.482139] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.482167] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
[    1.482283] aer 0000:00:00.0:pcie02: service driver aer loaded
[    1.482375] pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff]
[    1.482409] pcieport 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff 64bit pref]
[    1.482440] pcieport 0000:00:00.0: BAR 7: assigned [io  0x1000-0x1fff]
[    1.482471] pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff 64bit pref]
[    1.482516] pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff 64bit]
[    1.482560] pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
[    1.482590] pcieport 0000:00:00.0: PCI bridge to [bus 01]
[    1.482615] pcieport 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
[    1.482642] pcieport 0000:00:00.0:   bridge window [mem 0x32100000-0x321fffff]
[    1.482673] pcieport 0000:00:00.0:   bridge window [mem 0x12100000-0x121fffff 64bit pref]
[    1.482733] PCIE: No Link speed change happened
[    1.483291] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API
[    1.483401] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found
[    1.484278] tsec tsec: initialized
[    1.485783] isp isp.0: initialized
[    1.486739] isp isp.1: initialized
[    1.488290] falcon vic03.0: initialized
[    1.489455] falcon msenc: initialized
[    1.490235] tegradc tegradc.0: DSI: HS clock rate is 464500
[    1.491555] p,wuxga-10-1 panel dt support not available
[    1.771615] tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000
[    1.859884] tegradc tegradc.0: DSI pad calibration done
[    1.867032] tegradc tegradc.0: probed
[    1.867495] tegradc tegradc.0: fb registered
[    1.867518] tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110
[    1.873360] gpio wake4 for gpio=111
[    1.873666] tegra-i2c tegra12-i2c.3: no acknowledge from address 0x50
[    1.874571] tegradc tegradc.1: probed
[    1.879221] Console: switching to colour frame buffer device 80x30
[    1.884164] tegradc tegradc.1: fb registered
[    1.886008] hdmi_state_machine_worker (tid edb05040): state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
[    1.889648] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
[    1.893136] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
[    1.893908] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.895219] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra
[    1.939866] tegra_dc_hdmi_irq: start
[    1.939880] tegra_dc_hdmi_irq: end
[    1.939901] hdmi_state_machine_worker (tid edb23ac0): state 0 (Reset), hpd 1, pending_hpd_evt 1
[    1.939906] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 0 (Reset)
[    2.011395] hdmi_state_machine_worker (tid edb23ac0): state 0 (Reset), hpd 1, pending_hpd_evt 0
[    2.011398] hdmi_disable_l: audio_switch 0
[    2.011401] hdmi_disable_l: hpd_switch 0
[    2.011406] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
[    2.021969] hdmi_state_machine_worker (tid edb23ac0): state 1 (Check Plug), hpd 1, pending_hpd_evt 0
[    2.021975] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID)
[    2.084529] hdmi_state_machine_worker (tid edb23ac0): state 2 (Check EDID), hpd 1, pending_hpd_evt 0
[    2.117758] panel size 128 by 80
[    4.318009] console [ttyS0] enabled
[    4.318575] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA
[    4.318873] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
[    4.319151] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
[    4.321182]  (null): coherent DMA mask is unset
[    4.321192] gk20a gk20a.0: failed to allocate secure buffer -12
[    4.324780] loop: module loaded
[    4.325089] nct1008_nct72 0-004c: success in enabling rail vdd_nct72
[    4.328264] gpio wake35 for gpio=70
[    4.328329] nct1008_nct72 0-004c: nct1008_probe: initialized
[    4.328916] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra
[    4.329918] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
[    4.331366] tegra_cec tegra_cec: tegra_cec_init started
[    4.331546] tegra_cec tegra_cec: cec_add_sysfs ret=0
[    4.331552] tegra_cec tegra_cec: probed
[    4.332258] tegra_profiler: Branch: Dev
[    4.332261] tegra_profiler: Version: 1.88
[    4.332265] tegra_profiler: Samples version: 31
[    4.332268] tegra_profiler: IO version: 16
[    4.332274] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
[    4.332300] tegra_profiler: power_clk: init
[    4.332464] tegra_profiler: auth: init
[    4.332852] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
[    4.333545] tegra-sata tegra-sata.0: version 1.0
[    4.333554] of_get_named_gpio_flags: can't parse gpios property
[    4.334272] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
[    4.334284] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst
[    4.335465] scsi0 : tegra-sata
[    4.335884] scsi1 : tegra-sata
[    4.336125] ata1: SATA max UDMA/133 irq 55
[    4.336129] ata2: DUMMY
[    4.338001] tun: Universal TUN/TAP device driver, 1.6
[    4.338005] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.338231] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.340540] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf0000000, 00:04:4b:21:2e:15, XID 0c000800 IRQ 641
[    4.340548] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.340674] usbcore: registered new interface driver asix
[    4.340751] usbcore: registered new interface driver ax88179_178a
[    4.340789] usbcore: registered new interface driver cdc_ether
[    4.340840] usbcore: registered new interface driver smsc95xx
[    4.340878] usbcore: registered new interface driver cdc_subset
[    4.340943] usbcore: registered new interface driver cdc_ncm
[    4.340960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.341197] tegra USB phy - inst[1] platform info:
[    4.341200] port_otg: no
[    4.341202] has_hostpc: yes
[    4.341206] phy_interface: USB_PHY_INTF_UTMI
[    4.341208] op_mode: TEGRA_USB_OPMODE_HOST
[    4.341211] qc2_voltage: 0
[    4.341214] vbus_gpio: -1
[    4.341217] hot_plug: disabled
[    4.341220] remote_wakeup: enabled
[    4.342765] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
[    4.342790] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
[    4.342893] Wake40 for irq=53
[    4.342895] Wake42 for irq=53
[    4.342917] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
[    4.348753] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10
[    4.348842] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.348850] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.348856] usb usb1: Product: Tegra EHCI Host Controller
[    4.348861] usb usb1: Manufacturer: Linux 3.10.40-grinch-21.3.4 ehci_hcd
[    4.348866] usb usb1: SerialNumber: tegra-ehci.1
[    4.349412] hub 1-0:1.0: USB hub found
[    4.349437] hub 1-0:1.0: 1 port detected
[    4.349804] tegra USB phy - inst[2] platform info:
[    4.349807] port_otg: no
[    4.349810] has_hostpc: yes
[    4.349813] phy_interface: USB_PHY_INTF_UTMI
[    4.349816] op_mode: TEGRA_USB_OPMODE_HOST
[    4.349818] qc2_voltage: 0
[    4.349821] vbus_gpio: -1
[    4.349824] hot_plug: disabled
[    4.349827] remote_wakeup: enabled
[    4.351278] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
[    4.351300] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
[    4.351392] Wake41 for irq=129
[    4.351395] Wake43 for irq=129
[    4.351417] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
[    4.355750] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10
[    4.355834] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.355842] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.355848] usb usb2: Product: Tegra EHCI Host Controller
[    4.355853] usb usb2: Manufacturer: Linux 3.10.40-grinch-21.3.4 ehci_hcd
[    4.355858] usb usb2: SerialNumber: tegra-ehci.2
[    4.356341] hub 2-0:1.0: USB hub found
[    4.356359] hub 2-0:1.0: 1 port detected
[    4.356759] ehci-pci: EHCI PCI platform driver
[    4.357032] tegra_xusb_read_usb_calib: usb_calib0 = 0x02c5838c
[    4.357271] usbcore: registered new interface driver usb-storage
[    4.357379] usbcore: registered new interface driver usbserial
[    4.357417] usbcore: registered new interface driver usbserial_generic
[    4.357449] usbserial: USB Serial support registered for generic
[    4.357498] usbcore: registered new interface driver option
[    4.357528] usbserial: USB Serial support registered for GSM modem (1-port)
[    4.357631] usbcore: registered new interface driver pl2303
[    4.357660] usbserial: USB Serial support registered for pl2303
[    4.357672] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
[    4.357836] tegra USB phy - inst[0] platform info:
[    4.357839] port_otg: yes
[    4.357842] has_hostpc: yes
[    4.357844] phy_interface: USB_PHY_INTF_UTMI
[    4.357847] op_mode: TEGRA_USB_OPMODE_DEVICE
[    4.357849] qc2_voltage: 0
[    4.357851] vbus_pmu_irq: 0
[    4.357853] vbus_gpio: -1
[    4.357855] charging: enabled
[    4.357858] remote_wakeup: disabled
[    4.360734] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
[    4.361965] i2c /dev entries driver
[    4.363229] virtual_init
[    4.365077] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
[    4.365857] tegra_dtv_probe: probing dtv.
[    4.366207] setup_stream: bufsize = 4096, bufnum = 4
[    4.366208] ar0832_init: ++
[    4.366555] i2c-core: driver [max77387] using legacy suspend method
[    4.366557] i2c-core: driver [max77387] using legacy resume method
[    4.366605] i2c-core: driver [as364x] using legacy suspend method
[    4.366608] i2c-core: driver [as364x] using legacy resume method
[    4.366778] [IMX135] sensor driver loading
[    4.366832] [IMX179] sensor driver loading
[    4.366878] [imx132] sensor driver loading
[    4.366924] [AR0330] sensor driver loading
[    4.366970] [ar0261] sensor driver loading
[    4.367803] usbcore: registered new interface driver uvcvideo
[    4.367806] USB Video Class driver (1.1.1)
[    4.368658] zram: Created 1 device(s) ...
[    4.369834] sdhci: Secure Digital Host Controller Interface driver
[    4.369837] sdhci: Copyright(c) Pierre Ossman
[    4.369839] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.370222] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
[    4.370451] sdhci-tegra sdhci-tegra.3: Speedo value 2250
[    4.370459] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
[    4.511749] otg state changed: SUSPEND --> PERIPHERAL
[    4.667523] usb 2-1: new high-speed USB device number 2 using tegra-ehci
[    4.697462] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
[    4.697470] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.697476] usb 2-1: Product: USB2.0 Hub
[    4.697481] usb 2-1: Manufacturer: GenesysLogic
[    4.698968] hub 2-1:1.0: USB hub found
[    4.700337] hub 2-1:1.0: 4 ports detected
[    4.795769] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.815538] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3B0, max UDMA/133
[    4.815546] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.817144] ata1.00: configured for UDMA/133
[    4.821212] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS721010A9 JB0O PQ: 0 ANSI: 5
[    4.821678] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.821685] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.822015] sd 0:0:0:0: [sda] Write Protect is off
[    4.822023] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.822149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.828587] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.867123]  sda: sda1
[    4.868082] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.993589] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci
[    5.014467] usb 2-1.1: New USB device found, idVendor=0480, idProduct=a006
[    5.014475] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.014481] usb 2-1.1: Product: External USB 3.0
[    5.014487] usb 2-1.1: Manufacturer: Toshiba
[    5.014492] usb 2-1.1: SerialNumber: 20120704087137
[    5.015978] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[    5.016206] scsi2 : usb-storage 2-1.1:1.0
[    5.082458] usb 2-1.2: new low-speed USB device number 4 using tegra-ehci
[    5.112461] usb 2-1.2: New USB device found, idVendor=1997, idProduct=1221
[    5.112469] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.112475] usb 2-1.2: Product: Wireless Air mouse Keyboard
[    5.112481] usb 2-1.2: Manufacturer: 
[    5.331747] tegra_cec tegra_cec: tegra_cec_init Done.
[    5.671960] handle_check_edid_l: audio_switch 1
[    5.680128] Display connected, hpd_switch 1
[    5.687914] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled)
[    5.700912] hdmi_state_machine_worker (tid edb23ac0): state 4 (Enabled), hpd 1, pending_hpd_evt 0
[    5.714609] tegradc tegradc.1: nominal-pclk:83500000 parent:582000000 div:7.0 pclk:83142857 82665000~91015000
[    5.729744] tegradc tegradc.1: hdmi: can't set audio to 44100 at 83500000 pix_clock
[    5.742214] mmc0: no vqmmc regulator found
[    5.742232] mmc0: no vmmc regulator found
[    5.742236] mmc0: Invalid maximum block size, assuming 512 bytes
[    5.765745] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found
[    5.765746] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
[    5.766851] sdhci-tegra sdhci-tegra.2: Speedo value 2250
[    5.766858] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
[    5.841991] mmc0: BKOPS_EN bit is not set
[    5.847290] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data
[    5.847298] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found
[    6.392912] **********Auto tuning windows*************
[    6.399509] scsi 2:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 0101 PQ: 0 ANSI: 4
[    6.414355] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[    6.414385] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    6.433406] win[0]: 0(0) - 63(1)
[    6.433489] mmc1: no vqmmc regulator found
[    6.433507] mmc1: no vmmc regulator found
[    6.433511] mmc1: Invalid maximum block size, assuming 512 bytes
[    6.439745] sd 2:0:0:0: [sdb] 1953525165 512-byte logical blocks: (1.00 TB/931 GiB)
[    6.452735] sd 2:0:0:0: [sdb] Write Protect is off
[    6.452744] sd 2:0:0:0: [sdb] Mode Sense: 37 00 00 08
[    6.454766] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found
[    6.454766] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
[    6.470858] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.526456] win[1]: 69(0) - 133(1)
[    6.526540] gpio wake56 for gpio=170
[    6.528412] tegra-aes tegra-aes: registered
[    6.531176] tegra-se tegra12-se: tegra_se_probe: complete
[    6.531417] hidraw: raw HID events driver (C) Jiri Kosina
[    6.537462] input:   Wireless Air mouse Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input0
[    6.537967] hid-generic 0003:1997:1221.0001: input,hidraw0: USB HID v1.00 Keyboard [  Wireless Air mouse Keyboard] on usb-tegra-ehci.2-1.2/input0
[    6.543496] input:   Wireless Air mouse Keyboard as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.1/input/input1
[    6.543862] hid-generic 0003:1997:1221.0002: input,hidraw1: USB HID v1.00 Mouse [  Wireless Air mouse Keyboard] on usb-tegra-ehci.2-1.2/input1
[    6.543939] usbcore: registered new interface driver usbhid
[    6.543941] usbhid: USB HID core driver
[    6.544383] tegra-hier-ictlr tegra-hier-ictlr: probed
[    6.663170] win[2]: 140(0) - 205(1)
[    6.671337] win[3]: 212(0) - 255(1)
[    6.679431] ***************************************
[    6.688932] ********tuning windows after inserting holes*****
[    6.699283] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[    6.709389] win[0]:-2(0) - 33(2)
[    6.717190] win[1]:35(2) - 63(1)
[    6.725047] win[2]:69(0) - 104(2)
[    6.732871] win[3]:106(2) - 133(1)
[    6.740746] win[4]:140(0) - 175(2)
[    6.748588] win[5]:177(2) - 205(1)
[    6.756336] win[6]:212(0) - 246(2)
[    6.764031] win[7]:248(2) - 255(1)
[    6.771592] ***********************************************
[    6.781314] **********Tuning values*********
[    6.789662] **estimated values**
[    6.796973] T2T_Vmax 57, T2T_Vmin 80, 1'st_hole_Vmax 47, UI_Vmax 87
[    6.807380] **Calculated values**
[    6.814737] T2T_Vmax 70, 1'st_hole_Vmax 34, UI_Vmax 71
[    6.823900] T2T_Vmin 70, 1'st_hole_Vmin 34, UI_Vmin 71
[    6.832987] ***********************************
[    6.841441] ***********final tuning windows**********
[    6.850352] win[0]: 12 - 26
[    6.856961] win[1]: 43 - 49
[    6.863544] win[2]: 83 - 92
[    6.870089] win[3]: 119 - 119
[    6.876715] win[4]: 154 - 158
[    6.883242] win[5]: 195 - 191
[    6.889719] win[6]: 226 - 224
[    6.896149] win[7]: 255 - 241
[    6.902552] ********************************
[    6.910297] best tap win - (12-26), best tap value 19
[    6.918852] sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 19
[    6.934396] mmc0: new HS200 MMC card at address 0001
[    6.943157] mmcblk mmc0:0001: Card claimed for testing.
[    6.952110] mmcblk0: mmc0:0001 SEM16G 14.6 GiB
[    6.960312] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
[    6.972104]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[    7.104309] MAX98090 driver built on May  1 2015 at 10:27:45
[    7.114114] tegra_offload_platform probe successfull.
[    7.122035] succefully registered offload ops
[    7.129824] tegra30_avp_audio_platform_probe successful.
[    7.396332] rt5639 0-001c: read 0xfd=0x6
[    7.420909] rt5639 0-001c: ASoC: mux INR Mux has no paths
[    7.429744] rt5639 0-001c: ASoC: mux INL Mux has no paths
[    7.439338] gpio wake49 for gpio=143
[    7.446176] rt5639 0-001c: rt5639_headset_detect jack_type = 1
[    7.455372] tegra-snd-rt5639 tegra-snd-rt5639.0:  rt5639-aif1 <-> tegra30-i2s.1 mapping ok
[    7.467326] tegra-snd-rt5639 tegra-snd-rt5639.0:  dit-hifi <-> tegra30-spdif mapping ok
[    7.479062] tegra-snd-rt5639 tegra-snd-rt5639.0:  dit-hifi <-> tegra30-i2s.3 mapping ok
[    7.490787] tegra-snd-rt5639 tegra-snd-rt5639.0:  rt5639-aif1 <-> dit-hifi mapping ok
[    7.502305] tegra-snd-rt5639 tegra-snd-rt5639.0:  dit-hifi <-> dit-hifi mapping ok
[    7.513513] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback
[    7.523873] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture
[    7.534134] tegra-snd-rt5639 tegra-snd-rt5639.0:  snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok
[    7.546782] compress asoc: snd-soc-dummy-dai <-> tegra-offload-compr mapping ok
[    7.557723] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback
[    7.568183] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture
[    7.578551] tegra-snd-rt5639 tegra-snd-rt5639.0:  snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok
[    7.591332] tegra-snd-rt5639 tegra-snd-rt5639.0:  rt5639-aif1 <-> tegra30-i2s.1 mapping ok
[    7.606064] input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input2
[    7.619749] sysedp_create_consumer: unable to create speaker, no consumer_data for speaker found
[    7.629260] oprofile: using timer interrupt.
[    7.640441] Netfilter messages via NETLINK v0.30.
[    7.648764] TCP: cubic registered
[    7.655635] NET: Registered protocol family 10
[    7.664340] mip6: Mobile IPv6
[    7.670718] sit: IPv6 over IPv4 tunneling driver
[    7.679588] NET: Registered protocol family 17
[    7.687413] NET: Registered protocol family 15
[    7.695308] NET: Registered protocol family 35
[    7.703112] NET: Registered protocol family 37
[    7.710848] Key type dns_resolver registered
[    7.718384] NET: Registered protocol family 41
[    7.727405] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    7.762420] Registering SWP/SWPB emulation handler
[    7.770697] last reset is due to power on reset

[    7.783659] Disabling clocks left on by bootloader:
[    7.792065]    audio_2x
[    7.798071]    audio
[    7.803802]    audio4
[    7.809555]    audio3
[    7.815189]    audio2
[    7.820687]    audio1
[    7.826159]    audio0
[    7.831643]    hdmi_audio
[    7.837357]    entropy
[    7.842760]    dsi2-fixed
[    7.848403]    dsi1-fixed
[    7.853989]    nor
[    7.858837]    trace
[    7.863769]    sdmmc4_ddr
[    7.869135]    sdmmc3_ddr
[    7.874538]    cclk_lp
[    7.879595]    pll_x_out0
[    7.884869]    pll_m_out1
[    7.890165] tegra_dvfs: vdd_cpu connected to regulator
[    7.897924] tegra_dvfs: vdd_core connected to regulator
[    7.905798] tegra_dvfs: vdd_gpu connected to regulator
[    7.914545] tegra_dvfs: registered vdd_cpu simon notifier
[    7.923118] Tegra CPU DFLL is initialized with use_dfll = 1
[    7.931363] cpu_cold cooling device is registered
[    7.938781] CPU rate: 696 MHz
[    7.938831] cpu_hot cooling device is registered
[    8.212478] tegra dvfs: tegra sysfs cap interface is initialized
[    8.221033] tegra dvfs: tegra sysfs gpu & emc interface is initialized
[    8.230052] tegra dvfs: registered vdd_gpu simon notifier
[    8.238486] tegra_actmon.emc: Completed initialization (0)
[    8.246663] tegra_actmon.avp: Completed initialization (0)
[    8.254630] tegra_mon.cpu_emc: Completed initialization (0)
[    8.265323] reg-aon-1v2: incomplete constraints, leaving on
[    8.273136] reg-aon-1v8: incomplete constraints, leaving on
[    8.280910] sdmmc-en-supply: incomplete constraints, leaving on
[    8.289113] reg-dcdc-1v2: incomplete constraints, leaving on
[    8.297041] reg-5v0-supply: incomplete constraints, leaving on
[    8.305161] usb0-vbus: incomplete constraints, leaving on
[    8.312861] vpp-fuse: incomplete constraints, leaving on
[    8.320486] vdd-2v7-cam: incomplete constraints, leaving on
[    8.328431] avdd-spi: incomplete constraints, leaving on
[    8.336170] vdd-1v1-cam: incomplete constraints, leaving on
[    8.344229] vddio-sdmmc-2: incomplete constraints, leaving on
[    8.352479] vdd-1v2-cam: incomplete constraints, leaving on
[    8.360569] avdd-cam: incomplete constraints, leaving on
[    8.368415] vdd-cam: incomplete constraints, leaving on
[    8.376139] as3722-sd3: incomplete constraints, leaving on
[    8.384136] vdd-3v3-aon: incomplete constraints, leaving on
[    8.392268] vdd-ac-bat: incomplete constraints, leaving on
[    8.400295] regulator-dummy: incomplete constraints, leaving on
[    8.409503] of_get_named_gpio_flags exited with status 128
[    8.409555] gpio wake51 for gpio=128
[    8.415951] input: gpio-keys.4 as /devices/platform/gpio-keys.4/input/input3
[    8.426117] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    8.435675] ALSA device list:
[    8.441433]   #0: HDA NVIDIA Tegra at 0x70038000 irq 113
[    8.449647]   #1: tegra-rt5639
[    9.727632]  sdb: sdb1
[    9.821761] sd 2:0:0:0: [sdb] Attached SCSI disk
[    9.830700] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    9.842594] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    9.864103] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    9.875520] VFS: Mounted root (ext4 filesystem) on device 179:1.
[    9.887932] devtmpfs: mounted
[    9.894630] Freeing unused kernel memory: 488K (c0adf000 - c0b59000)
[   10.059402] systemd[1]: Inserted module 'autofs4'
[   10.075867] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.084822] systemd[1]: Inserted module 'ip_tables'
[   10.108114] systemd[1]: systemd 224 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[   10.134438] systemd[1]: Detected architecture arm.
[   10.157140] systemd[1]: Set hostname to <jetson>.
[   10.462894] systemd[1]: [/usr/lib/systemd/system/nzbget.service:4] Unknown lvalue 'DaemonAfter' in section 'Unit'
[   10.506536] systemd[1]: [/usr/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
[   10.521161] systemd[1]: [/usr/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
[   10.553040] systemd[1]: Reached target Swap.
[   10.566296] systemd[1]: Reached target Remote File Systems.
[   10.580692] systemd[1]: Reached target Encrypted Volumes.
[   10.595255] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.612697] systemd[1]: Created slice Root Slice.
[   10.626820] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.643252] systemd[1]: Listening on LVM2 metadata daemon socket.
[   10.658895] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.674447] systemd[1]: Listening on Journal Socket.
[   10.689103] systemd[1]: Listening on udev Kernel Socket.
[   10.704377] systemd[1]: Listening on udev Control Socket.
[   10.719458] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.736039] systemd[1]: Listening on networkd rtnetlink socket.
[   10.752260] systemd[1]: Created slice User and Session Slice.
[   10.768373] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.788511] systemd[1]: Created slice System Slice.
[   10.806649] systemd[1]: Starting Journal Service...
[   10.825463] systemd[1]: Starting Setup Virtual Console...
[   10.846130] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   10.871116] systemd[1]: Mounting Debug File System...
[   10.900081] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   10.918982] systemd[1]: Created slice system-getty.slice.
[   10.937809] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.964201] systemd[1]: Mounting Temporary Directory...
[   10.984383] systemd[1]: Mounting POSIX Message Queue File System...
[   11.003221] systemd[1]: Reached target Slices.
[   11.026759] systemd[1]: Mounting FUSE Control File System...
[   11.047373] systemd[1]: Starting Apply Kernel Variables...
[   11.065279] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   11.084265] systemd[1]: Reached target Paths.
[   11.104924] systemd[1]: Mounted Debug File System.
[   11.120034] systemd[1]: Mounted FUSE Control File System.
[   11.135379] systemd[1]: Mounted POSIX Message Queue File System.
[   11.151397] systemd[1]: Mounted Temporary Directory.
[   11.168433] systemd[1]: Started Setup Virtual Console.
[   11.185190] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   11.207000] systemd[1]: Started Remount Root and Kernel File Systems.
[   11.227519] systemd[1]: Started Apply Kernel Variables.
[   11.447091] systemd[1]: Starting Load/Save Random Seed...
[   11.469546] systemd[1]: Starting udev Coldplug all Devices...
[   11.490042] systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.517151] systemd[1]: Started Load/Save Random Seed.
[   11.537120] systemd[1]: Started Create Static Device Nodes in /dev.
[   11.605325] systemd[1]: Reached target Local File Systems (Pre).
[   11.625502] systemd[1]: Starting udev Kernel Device Manager...
[   11.675744] systemd[1]: Started Journal Service.
[   11.798401] systemd-journald[134]: Received request to flush runtime journal from PID 1
[   12.684048] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0
[   12.684057] as3722-rtc as3722-rtc.1: RTC interrupt 449
[   13.324251] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[   13.624141] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[   14.183912] r8169 0000:01:00.0 enp1s0: link down
[   14.183968] r8169 0000:01:00.0 enp1s0: link down
[   14.184085] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   15.348273] vgaarb: this pci device is not a vga device
[   15.384368] tegra_simon_gpu_grading_cb: graded gpu: v = 800, t = 32000, grade = 0
[   16.769473] r8169 0000:01:00.0 enp1s0: link up
[   16.773964] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[  256.141347] vgaarb: this pci device is not a vga device
[  256.173427] tegradc tegradc.1: nominal-pclk:83500000 parent:582000000 div:7.0 pclk:83142857 82665000~91015000
arcangeli
 
Posts: 6
Joined: Sun Oct 12, 2014 11:12 am


Return to nVidia

Who is online

Users browsing this forum: No registered users and 1 guest