Hi, I'm newbie
I got a POGOPLUG P-24 device that was not working at all, blinking LED all the time.
Followed some post like:
viewtopic.php?f=29&t=3560
http://archlinuxarm.org/platforms/armv6 ... asend-life
and managed to boot the device with a usb stick, to get ip address and log in by ssh. But:
I can't install oxnas with script ./oxnas-install.sh
This is what I got:
Using username "root".
root@192.168.0.102's password:
Last login: Sun Jul 21 14:00:35 2013 from 192.168.0.23
[root@alarm ~]# cd /tmp/
[root@alarm tmp]# wget http://archlinuxarm.org/os/oxnas/oxnas-install.sh
--2013-07-21 15:36:31-- http://archlinuxarm.org/os/oxnas/oxnas-install.sh
Resolving archlinuxarm.org (archlinuxarm.org)... 50.116.36.110
Connecting to archlinuxarm.org (archlinuxarm.org)|50.116.36.110|:80... connected .
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://os.archlinuxarm.org/os/oxnas/oxnas-install.sh [following]
--2013-07-21 15:36:37-- http://os.archlinuxarm.org/os/oxnas/oxnas-install.sh
Resolving os.archlinuxarm.org (os.archlinuxarm.org)... 213.202.193.253, 129.241. 205.167, 137.226.34.42, ...
Connecting to os.archlinuxarm.org (os.archlinuxarm.org)|213.202.193.253|:80... c onnected.
HTTP request sent, awaiting response... 200 OK
Length: 6919 (6.8K) [application/x-sh]
Saving to: `oxnas-install.sh'
100%[======================================>] 6,919 --.-K/s in 0.004s
2013-07-21 15:36:37 (1.66 MB/s) - `oxnas-install.sh' saved [6919/6919]
[root@alarm tmp]# chmod 755 oxnas-install.sh
[root@alarm tmp]# ls
oxnas-install.sh
[root@alarm tmp]# ./oxnas-install.sh
#############################
##
## Pogoplug OXNAS based boards
## Arch Linux ARM rootfs Installer
##
#############################
##
## For use with OXNAS 7820 only.
##
#############################
## PREPARATION
# Switching to /tmp...
# Ensuring we're ready to proceed...
hbwd: no process found
umount: /dev/sda1: not mounted
# Preparing our way...
# Getting uboot parameters...
./oxnas-install.sh: line 25: /usr/local/cloudengines/bin/blparam: No such file o r directory
# = MAC :
# = load_nand :
# = bootargs :
# = board :
#
# Checking board revision...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ABORTING!!! UNSUPPORTED MODEL
=================================
See the wiki on models supported
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
some proc command output:
[root@alarm tmp]# lscpu
Architecture: armv6l
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 1
Socket(s): 2
[root@alarm tmp]#
[root@alarm tmp]# cat /proc/cpuinfo
Processor : ARMv6-compatible processor rev 5 (v6l)
processor : 0
BogoMIPS : 279.34
processor : 1
BogoMIPS : 279.34
Features : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xb02
CPU revision : 5
Hardware : Oxsemi NAS
Revision : 0000
Serial : 0000000000000000
[root@alarm tmp]#
Please help, what am I doing wrong?
THX !