Reset GoFlex Home to Stock Firmware

[baigner]

Hello

I've got again some troubles with my GoFlex Home.
It won't boot into the arch linux since a few days, there is only the yellow led blinking on the front of the device.

I want to go back to the stock firmware from seagate, but it's not possible because the reset button isn't working.
If I remove the HD from the Doc it also won't come up again.
I can't reach it in my network.

So please give me some instructions to rescue my Plug!

Thanks!

[WarheadsSE]

Read the post about "goflex home is death"

[baigner]

Well I followed the steps in the thread you told me and started my go flex device with a usb drive.
on my router i can see the device by hostname "alarm" and IP 10.0.0.5, but I cannot access it by ssh.

What can I do now?

[Sagittarius]

$this->bbcode_second_pass_quote('baigner', 'W')ell I followed the steps in the thread you told me and started my go flex device with a usb drive.
on my router i can see the device by hostname "alarm" and IP 10.0.0.5, but I cannot access it by ssh.

What can I do now?

[baigner]

is there anyone who can help us to fix our Goflex Station?

[moonman]

You should use search.

Keywords: netconsole, rootfs, linux live cd.

In short: diagnose with netconsole, then you will probably need to use linux live cd/linux installation to extract rootfs tarball using a regular PC to the hard drive/usb stick.

I don't mean to be rude but there are many topics about exactly the same problem with resolution. It gets old repeating the same thing over and over

[baigner]

well, now i can access my goflex home.

I started it up by the USB pen with the inserted HD drive and it worked.

What I want to do now is to install the original Seagate System.
I know that the Reset button of the Dock is deactivated by the arch system.
So can anybody help me to reinstall my GoFlex device?

Thanks!

[moonman]

It isn't deactivated, you just have a completely different OS installed so it doesn't work. Reset button resets the stock OS settings, but does not reflash the whole operating system.

I suppose you need this:
http://support.goflexhome.hipserv.com/e ... index.html