install transmission problem

[nooblLinux]

I follow guide at https://wiki.archlinux.org/index.php/Transmission to install transmission into my pogoplug E02, but it fail when I restart it here is the out put:

$this->bbcode_second_pass_code('', '
[root@alarm ~]# systemctl restart transmission
Job for transmission.service failed. See 'systemctl status transmission.service' and 'journalctl -xn' for details.

[root@alarm ~]# systemctl status transmission.service
transmission.service - Transmission Bit Torrent Daemon
Loaded: loaded (/etc/systemd/system/transmission.service; enabled)
Active: failed (Result: timeout) since Tue 2013-02-26 15:52:14 CST; 2min 52s ago
Process: 401 ExecStart=/usr/bin/transmission-daemon --pid-file /run/transmission/transmission.pid (code=exited, status=0/SUCCESS)

Feb 26 15:50:44 alarm transmission-daemon[402]: Saved "/var/lib/transmission/.config/transmission-daemon/settings.json" (bencode.c:1738)
Feb 26 15:50:44 alarm transmission-daemon[402]: Unable to save pidfile "/run/transmission/transmission.pid": Permission denied (daemon.c:533)
Feb 26 15:50:44 alarm transmission-daemon[402]: Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
Feb 26 15:50:44 alarm transmission-daemon[402]: Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
Feb 26 15:50:50 alarm transmission-daemon[402]: Port Forwarding State changed from "Not forwarded" to "Starting" (port-forwarding.c:93)
Feb 26 15:50:52 alarm transmission-daemon[402]: Port Forwarding State changed from "Starting" to "???" (port-forwarding.c:93)
Feb 26 15:51:17 alarm transmission-daemon[402]: DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
Feb 26 15:52:13 alarm systemd[1]: transmission.service operation timed out. Terminating.
Feb 26 15:52:14 alarm transmission-daemon[402]: Saved "/var/lib/transmission/.config/transmission-daemon/settings.json" (bencode.c:1738)
Feb 26 15:52:14 alarm transmission-daemon[402]: DHT Not saving nodes, DHT not ready (tr-dht.c:357)
Feb 26 15:52:14 alarm systemd[1]: Failed to start Transmission Bit Torrent Daemon.
Feb 26 15:52:14 alarm systemd[1]: Unit transmission.service entered failed state
[root@alarm ~]# journalctl -xn
-- Logs begin at Wed 1969-12-31 18:00:13 CST, end at Tue 2013-02-26 15:52:14 CST. --
Feb 26 15:50:50 alarm transmission-daemon[402]: Port Forwarding State changed from "Not forwarded" to "Starting" (port-forwarding.c:93)
Feb 26 15:50:52 alarm transmission-daemon[402]: Port Forwarding State changed from "Starting" to "???" (port-forwarding.c:93)
Feb 26 15:51:17 alarm transmission-daemon[402]: DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
Feb 26 15:52:13 alarm systemd[1]: transmission.service operation timed out. Terminating.
Feb 26 15:52:14 alarm transmission-daemon[402]: Saved "/var/lib/transmission/.config/transmission-daemon/settings.json" (bencode.c:1738)
Feb 26 15:52:14 alarm transmission-daemon[402]: DHT Not saving nodes, DHT not ready (tr-dht.c:357)
Feb 26 15:52:14 alarm transmission-daemon[402]: Port Forwarding Stopped (port-forwarding.c:181)
Feb 26 15:52:14 alarm transmission-daemon[402]: Closing session
Feb 26 15:52:14 alarm systemd[1]: Failed to start Transmission Bit Torrent Daemon.
-- Subject: Unit transmission.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
--
-- Unit transmission.service has failed.
--
-- The result is failed.
Feb 26 15:52:14 alarm systemd[1]: Unit transmission.service entered failed state
')

please help

[moonman]

$this->bbcode_second_pass_code('', 'killall transmission-daemon
rm /run/transmission/transmission.pid')

[nooblLinux]

$this->bbcode_second_pass_quote('moonman', '[')code]killall transmission-daemon
rm /run/transmission/transmission.pid[/code]

[nooblLinux]

nvm I fogot to do chmod -R 777 /run/transmission. Transmission is running now, but dont know why http://127.0.0.1:9091/ doesn't working. If you can please let me know why.

[moonman]

Because wiki assumes you are on the same machine as the transmission is installed on 127.0.0.1 is localhost. Use ip of the plug to acces transmission: 192.168.XXX.XXX:9091

[TWO515TY]

Don't forget to change the configuration file to allow your computer's IP address or IP address range to access the transmission web interface. By default, you can only access the web interface from 127.0.0.1. You must either add 192.168.x.* (Where x is 0,1,2, or whatever your network's IP address uses), or start the daemon with

$this->bbcode_second_pass_code('', 'transmission-daemon -a 192.168.x.*')