[SOLVED] (v.4) installation using USB 3.0 port

[ethanjoh]

Hi, again

I'm using Pogo v.4.
I've already used USB 2.0 port on the top with HDD.
I want to install archlinux with USB 3.0 port on the back.
Is it possible?
Can be installed USB 2.0 port only?

[xenoxaos]

You would need the bootloader and kernel on the usb2 but you should be able to have the rootfs on usb3

[ethanjoh]

$this->bbcode_second_pass_quote('xenoxaos', 'Y')ou would need the bootloader and kernel on the usb2 but you should be able to have the rootfs on usb3

[xenoxaos]

You would still have to use the USB2 plug as well as the USB3 plug. It can't boot off of usb3 alone. Also, I would recommend getting a serial adapter because you would have to modify the bootargs/uboot settings to get it to work.

[ethanjoh]

$this->bbcode_second_pass_quote('xenoxaos', 'Y')ou would still have to use the USB2 plug as well as the USB3 plug. It can't boot off of usb3 alone. Also, I would recommend getting a serial adapter because you would have to modify the bootargs/uboot settings to get it to work.

[WarheadsSE]

$this->bbcode_second_pass_quote('ethanjoh', '')$this->bbcode_second_pass_quote('xenoxaos', '[')b]You would still have to use the USB2 plug as well as the USB3 plug. It can't boot off of usb3 alone. Also, I would recommend getting a serial adapter because you would have to modify the bootargs/uboot settings to get it to work.

[ethanjoh]

I found the easiest way...I was so stupid.
Just plugin USB 2.0 HDD to USB 3.0 port, and I can install using USB 2.0 port on the top.