Pogoplug v4 soft reboots
4 posts
• Page 1 of 1
Pogoplug v4 soft reboots
by Holzhaus » Mon Jan 26, 2015 12:32 pm
$this->bbcode_second_pass_quote('Installation instructions', 'U')-Boot has been noted to occasionally not properly re-initialize USB and SATA drives on soft reboots. This is a rare occurrence, but if you are stuck with just a flashing green light after following the instructions above and rebooting, then just power-cycle the device. This won't harm the filesystem, and will be sure to get the device(s) plugged in on top re-initialized properly.
Any updates on this? Working soft reboots would be cool.
Thanks in advance,
Jan
- Holzhaus
- Posts: 62
- Joined: Wed Jan 21, 2015 12:40 pm
Re: Pogoplug v4 soft reboots
by grayman4hire » Tue Jan 27, 2015 8:02 pm
This issue is dependent on the USB flash drive or hard drive you use.
- grayman4hire
- Posts: 350
- Joined: Sat Sep 29, 2012 12:03 am
- Location: SF, CA
Re: Pogoplug v4 soft reboots
by Holzhaus » Wed Jan 28, 2015 8:30 pm
I have this issue using a SanDisk Cruzer Fit flash drive and encounter this issue. I don't want to use another drive, because it allows me close the case.
Just bought a remote controller power outlet.
Just bought a remote controller power outlet.
- Holzhaus
- Posts: 62
- Joined: Wed Jan 21, 2015 12:40 pm
Re: Pogoplug v4 soft reboots
by grayman4hire » Wed Jan 28, 2015 9:52 pm
$this->bbcode_second_pass_quote('Holzhaus', 'I') have this issue using a SanDisk Cruzer Fit flash drive and encounter this issue. I don't want to use another drive, because it allows me close the case.
Just bought a remote controller power outlet.
Just bought a remote controller power outlet.
Hmm...the Cruzer Fit works fairly consistently for me. What uBoot are you running?
Try the uBoot from here to see if it makes a difference - http://blog.qnology.com/2014/07/hacking ... obile.html
Or switch to SD Card booting.
- grayman4hire
- Posts: 350
- Joined: Sat Sep 29, 2012 12:03 am
- Location: SF, CA