[solved] Seagate goflex home 3TB failed to boot

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

[solved] Seagate goflex home 3TB failed to boot

Postby khanhj » Thu May 20, 2021 1:12 pm

Hi guys,
Just bought the seagate goflex home cradle recently and i changing from 500GB to 3TB
i download and flash uboot here: https://archlinuxarm.org/packages/arm/uboot-goflexhome
i notice that the uboot show here is kind of outdate: http://tw.mirror.archlinuxarm.org/os/ar ... oflexhome/
i did like the instruction in this https://archlinuxarm.org/forum/viewtopic.php?f=53&t=2611&start=30 but it still failed to boot. Here is netconsole log
Code: Select all
khanhj@khanhj-NUC:~$ nc -lu 10.10.10.5 6666

U-Boot 2016.09.01-1 (Oct 10 2016 - 23:11:39 -0600) Arch Linux ARM
Seagate GoFlex Home
gcc (GCC) 6.2.1 20160830
GNU ld (GNU Binutils) 2.27
Hit any key to stop autoboot:  0
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Reset IDE: Bus 0: OK Bus 1: not available 
  Device 0: Model: WDC WD30EZRZ-00Z5HB0 Firm: 00.02C.3 Ser#: WD-WMC4N0M7ER6Y
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 2861588.4 MB = 2794.5 GB (5860533176 x 512)

USB device 0: unknown device

Device 0: Model: WDC WD30EZRZ-00Z5HB0 Firm: 00.02C.3 Ser#: WD-WMC4N0M7ER6Y
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 2861588.4 MB = 2794.5 GB (5860533176 x 512)
... is now current device
ide found on device 0
Checking for: /boot/uEnv.txt ...
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Entry Array CRC is wrong: 0x253e8d13 != 0x2565e240
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Entry Array CRC is wrong: 0x253e8d13 != 0x2565e240
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Entry Array CRC is wrong: 0x253e8d13 != 0x2565e240
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
No kernel found

Device 1: not available
Trying to boot from NAND ...
ubi0: attaching mtd1
UBI init error 22
Error reading superblock on volume 'ubi0:rootfs' errno=-19!
ubifsmount - mount UBIFS volume

Usage:
ubifsmount <volume-name>
    - mount 'volume-name' volume
GoFlexHome>



Any help is appreciated.
Khanhj
Last edited by khanhj on Fri May 21, 2021 4:47 am, edited 1 time in total.
khanhj
 
Posts: 4
Joined: Thu May 20, 2021 1:05 pm

Re: Newbie need help - seagate goflex home 3TB failed to boo

Postby khanhj » Thu May 20, 2021 1:12 pm

there is no nc log for kernel in 10.10.10.4 6666
khanhj
 
Posts: 4
Joined: Thu May 20, 2021 1:05 pm

Re: Newbie need help - seagate goflex home 3TB failed to boo

Postby moonman » Thu May 20, 2021 6:38 pm

The instructions you linked to are almost 10 years old now.

The U-Boot you have supports straight GPT. Repartition with GPT, format with ext4 and extract rootfs.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3332
Joined: Sat Jan 15, 2011 3:36 am

Re: Newbie need help - seagate goflex home 3TB failed to boo

Postby khanhj » Thu May 20, 2021 9:57 pm

Hey Moonman.

Thanks for replied.
i been struggled with this for 3 days.
i just did as you said:
- use gdisk, create gpt, first one 11Gb. 2nd for the rest.
- mkfs to format both to ext4
- tune2fs to label /dev/sdb1 to "rootfs"
- mount /dev/sdb1
- copy Archlinux kirkwood latest to it and extract by tar -zxvf
- umount
- put it back to cradle, poweron, monitoring nc

The error is the same as last post. Am i missing something?
as it say CRC error is kind of weird :(
khanhj
 
Posts: 4
Joined: Thu May 20, 2021 1:05 pm

Re: Newbie need help - seagate goflex home 3TB failed to boo

Postby khanhj » Fri May 21, 2021 4:46 am

hey, no worry, i solved this. will update 1st post later
khanhj
 
Posts: 4
Joined: Thu May 20, 2021 1:05 pm


Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 4 guests